WELCOME
The aim of this document is to quickly guide users
through the basic process of using the Arqa
On-Screen Menu (OSM) for the rst time within an
Aetria® environment.
At this stage the Aetria OneControl group will have
been congured within the Aetria Command Center
by the system administrator along with any shortcuts
that will be used to control the Arqa Workstation.
For more detailed information regarding the Arqa
device, refer to the Arqa User Guide.
STEP 1 - ARRIVING AT THE
ARQA WORKSTATION
When the workstation mouse is moved between
screens a red border will ash on the currently active
screen as shown below, providing the feature has
been enabled in Aetria Command Center by the
administrator.
The user is presented with the Arqa on-screen menu
(OSM) on each screen which shows details of the
current remote connection.
STEP 2 - LOGGING ON
Press scroll lock ve times or use any pre-congured
keyboard shortcut as provided by your system
administrator to access the login screen presented.
Enter the login credentials that have been supplied by
the system administrator. It should be noted that the
login is case sensitive. When successfully logged in
the Status Screen is displayed.
STEP 3 - OPEN THE DEVICE LIST
To open the Device List, use the congured device
list shortcut key stroke provided by the system
administrator.
Alternatively, you can press scroll lock ve times in
quick succession to bring up the control menu and
press L for the Device List.
The Device List displays a list of sources available for
use on the Arqa Workstation. The list is dened by
the user permissions congured in Aetria Command
Center.
To display a specic source on the currently active
Workstation screen, use the up/down cursor keys
on the keyboard to select the required source and
press enter to connect to the remote source and
see it displayed on the screen. If another source is
selected from the Device List, it will take priority and
switch from the existing displayed source.
To remove the source from the Workstation screen,
you can use the shortcut key stroke given by the
administrator for ‘disconnect’. Press the shortcut key
stroke to bring the device back to an unconnected
state. Alternatively, you can open the Device List again
and press Dfor Disconnect with the Device List open.
2
Arqa Workstation Quick Start Guide
