You can press the ESC button to view factory EPROM version,
LCD will display such as:
DATATRONICS
341-008-137
2. Press the ENTER button to view the LCD Main Menu. The LCD
will display:
<MAIN MENU>
STATUS
Remember that STATUS is the first possible directory users can
view. However, you can not configure the contents of STATUS.
3. Pressing either the left or right arrow buttons on the LCD control
panel allows users to choose either the STATUS, SETUP,
PROFILE or EXECUTE Directories.
4. After choosing a directory, first press ENTER, then use LIFT,
RIGHT and ENTER button to view either that directory's contents,
subdirectory, or both. Continue to use the LEFT, RIGHT or
ENTER button to choose directory contents or subdirectory
contents for configuration. Once users are in a particular directory
or subdirectory and viewing its contents, pressing the ENTER
button will assign configurations to the modem for operation. At
this point users should be able to hear a "beep" from the modem
and see an asterisk (*) next to the configuration, representing that
the configuration is now enabled.
5. Once you enter any particular directory, subdirectory, or the
contents of either, use the left and right arrow buttons to begin
modem configuration. In general, if the contents of any directory
or subdirectory are standard (not modifiable by users and
permanently entered in the modems NVRAM), use either the left
or right arrow buttons to go forward or backward to view the
contents before pressing ENTER and enabling a configuration. In
contrast, if the contents of a directory or subdirectory include user
modifiable configurations, such as passwords, telephone numbers,
speeds, or times, which may amount to a long string of characters,
modem configuration is slightly different. Pressing the right
Page: 10
