Datecs Linea Pro 4.0 Series Manuale utente
Linea Pro 4.0
iPhone®, iPod®, iPod classic®, iPod nano®, iPod shuffle®, and iPod
touch® are trademarks of Apple Inc., registered in the U.S. and other
countries. iPad™ is a trademark of Apple Inc.
User Manual
. . . . . . . . . . . . . . . . . . . . . .
Page 2
Linea Pro 4.0 User Manual v1.00
Legal notice
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an
electronic accessory has been designed to connect specifically to iPod,
iPhone, or iPad, respectively, and has been certified by the developer to
meet Apple performance standards. Apple is not responsible for the
operation of this device or its compliance with safety and regulatory
standards. Please note that the use of this accessory with iPod, iPhone,
or iPad may affect wireless performance.
Compatibility
Made for
•iPod touch 4th generation
•iPhone 4
. . . . . . . . . . . . . . . . . . . . . .
Page 3
Linea Pro 4.0 User Manual v1.00
Linea Pro 4.0 Models
Model Description
Linea Pro 4.0 MSR Linea Pro 4.0 4 with 3-Track mag-stripe reader
Linea Pro 4. MSR 1D Linea Pro 4.0 with 3-Track mag-stripe reader and
1D barcode scanner
Linea Pro 4. MSR 2D Linea Pro 4.0 with 3-Track mag-stripe reader and
2D barcode scanner
Linea Pro 4.0 MSR 1D BT Linea Pro 4.0 with 3-Track mag-stripe reader and
1D barcode scanner and Bluetooth®
Linea Pro 4.0 MSR 2D BT Linea Pro 4.0 with 3-Track mag-stripe reader and
2D barcode scanner and Bluetooth®
. . . . . . . . . . . . . . . . . . . . . .
Page 4
Linea Pro 4.0 User Manual v1.00
Contents
Contents ............................................................................................4
Overview............................................................................................5
Technical Data...................................................................................6
Box Contents.....................................................................................7
Getting Started ..................................................................................8
About Your Linea Pro 4.0..................................................................9
Charging Battery.............................................................................11
Status & Operating Modes..............................................................12
Attaching Device.............................................................................13
1D Barcode Scanning .....................................................................14
2D Barcode Scanning .....................................................................15
Replacing Battery............................................................................17
Syncing............................................................................................18
Developing Solutions......................................................................19
Troubleshooting..............................................................................20
Card Reading.....................................................................20
Barcode Scanning.............................................................21
Federal Communications Commission ..............................................22
. . . . . . . . . . . . . . . . . . . . . .
Page 5
Linea Pro 4.0 User Manual v1.00
Overview
Linea Pro 4.0 allows mobile workers to convert their iPod touch and
iPhone handset into a powerful point-of-sale solution. The Linea Pro
4.0 includes optional 1D or 2D barcode scanner, 3-tracks magnetic
stripe reader, and a rechargeable battery extender in a very compact
and durable protective case.
Features:
Battery: Rechargeable Li-ion Battery - 1300 mAh,
Charging via USB to computer or Charging Station
to Linea Pro 4.0, Provides auxiliary power to iPod
touch and iPhone
Magnetic Card Reader – 3-Track Head:
Swipe Speed: Minimum of 1.97 in/sec
MTBF: 1 million swipes
Bidirectional reading capabilities
Barcode Scanner - Class II - 1D Laser / 2D Imager:
Single / Multi-scan mode
1D - MTBF: 30K hours
(Laser Diode & Mirror Unit 10K hours)
2D - MTBF: 50K hours
(Imager & Laser Pointer & Focus LED)
Indicators: Audible: Internal electro-magnetic buzzer
Visual: 3 green LEDs
I/O Connectors: 30-pin plug iPod dock connector
10-pin female Mini-B USB connector for charging
and synchronization
. . . . . . . . . . . . . . . . . . . . . .
Page 6
Linea Pro 4.0 User Manual v1.00
Technical Data
General Specifications:
Power supply Internal voltage 3.3V & 5V
Operation Modes
Active (turn on Linea Pro 4.0) / Active with Scanning / Stand By (after 5sec
without operate)
MCU Hitachi - HD64F3687
Memory 512k I2C EEPROM memory - for Linea Pro 4.0 settings
Communications
RS232 Interface - communication between Linea Pro 4.0 & iPod /iPhone
USB Interface - USB Synchronization between iPhone / iPod & PC
RS232 Interface Speed: 57600bps
iPod RS232 Protocol
Power
consumption
Active with Scanning: 1D Engine – 110mA; 2D Engine - 230mA
Active - approximately 25mA
Stand by - 10µA
Buttons Volume Up Button, Volume Down Button, Status Battery Button,
Scan Button
Magnetic Stripe
Reader 3-track bidirectional reading capabilities
Type: ISO 7816-1/2/3 compatible & RAW mode
Barcode Reader MDL-1000 - Laser Scan Engine 1D Barcode
MDI-2000 – Auto-focus Imager Scan Engine 2D Barcode
Barcode Type
UCC/EAN 128, EAN 13, EAN 8, UPC A, UPC E, UPC E1, Code 11, Code
39, Code 93, Code 128, GS1, Matrix 2 to 5, Code 11,2 of 5 industrial, 2
of 5 interleaved, Codebar, MSI/Plessey, UK/Plessey, IATA,ISBN, ISMN,
ISSN, S-code, Telepen, RSS 14, RSS Limited, RSS- Expanded, PDF417,
microPDF417, Data Matrix, QR code, Aztec code, Maxi code, Micro QR
code
LEDs 3 green LEDs for status of Battery Charging and status of the Device
Battery Rechargeable Li-ion Battery 3.7V/1300mAh
1D: Over 14,000 scan and swipes per full charge
2D: Over 8,000 scan and swipes per full charge
Audio Indicator Electro-Magnetic Buzzer
Weight, g 95 grams without iPod / iPhone
230 grams with iPhone
197 grams with iPod
Dimensions, mm
125mm x 67mm x (19 to 25)mm - depends on scanner 1D/2D & device)
Environment
- Operating temperature 0°C to +40°C
- Operating humidity 35 to 85% RH
- Storage temperature -5°C to +40°C
- Storage humidity 10 to 90% RH
Cables Standard USB A to mini B CABLE
USB DOWNLOAD CABLE (option)
Table 1
* Specifications subject to change without notice.
. . . . . . . . . . . . . . . . . . . . . .
Page 7
Linea Pro 4.0 User Manual v1.00
Box Contents
Your Linea Pro 4.0 comes with the following items listed below:
Item Part Number Descriptions Image
1 Linea Pro 4.0 4 Linea Pro 4.0 Reader
/ Scanner
2 CABDAT001240 USB sync cable
3 Pro 4.0 User
Manual User's manual
Table 2
*Bulk Shipments may ship without cables and manuals in each box.
Software ( Drivers & SDK ):
Because of the continually evolving SDK, the latest SDK are not
distributed on CD.
For the latest Linea Pro 4.0 SDK’s, please visit our Linea Pro
developer portal:
ftp://ftp.datecs.bg/pub/Java/SDKM
. . . . . . . . . . . . . . . . . . . . . .
Page 8
Linea Pro 4.0 User Manual v1.00
Getting Started
The Linea Pro 4.0 allows you to scan barcode and capture Magnetic
Strip information onto your iPod and iPhone. Before using your Linea
Pro 4.0 the battery should be properly charged. The following Quick
Start guide will help to get your Linea Pro 4.0 ready for use.
Quick Start:
Step What to do Purpose Where to find more
information
1
Fully charge your
Linea Pro 4.0 as
recommended.
The battery pack
should be fully
charged before use
to ensure long
battery life.
Charging Battery,
Page 10.
2
Install Software.
Barcode Scanning
& Card Reading
requires software
to be installed onto
your iPod or
iPhone.
Software is not
provided with Linea
Pro 4.0. Please
contact your reseller
for recommendations
on Third-Party
software solutions.
Developers should
refer to the section in
this manual on
“Developing
Solutions” Page 18.
3
Attach device to
Linea Pro 4.0.
Connecting your
Linea Pro and
iPod, iPhone.
Attaching Device,
Page 12.
Table 3
. . . . . . . . . . . . . . . . . . . . . .
Page 9
Linea Pro 4.0 User Manual v1.00
About Your Linea Pro 4.0
♦Linea Pro 4.0 (Right side)
Figure 1
♦Linea Pro 4.0 (Left side)
Figure 2
Volume Controls
can Button
On/Off
U B
ync
/ Charge Port
can Engine
Audio Connector
. . . . . . . . . . . . . . . . . . . . . .
Page 10
Linea Pro 4.0 User Manual v1.00
About Your Linea Pro 4.0
♦
Linea Pro 4.0
(Bottom side)
Figure 3
User Notes:
Special software must be used to process the information captured by
the barcode scanner and magnetic strip reading feature. Please
consult your reseller for this software or contact Infinite Peripherals for
recommendations on compatible third party software solutions.
M R Reader
can Engine
can Button
Questo manuale è adatto per i seguenti modelli
5
Indice
Altri manuali Datecs Scanner
