2
)))
SLP
watt
2
ON / OFF
(Power switch)
Upon turning on the power switch (On/Off),
the six display windows of the dashboard
will display all the symbols and number
segments for about eight seconds. This is
a self test run by the computer on the entire system.
The ergo_lyps switches automatically to stand by mode if it is left switched on and
unused for about two hours. This is signaled by three beep sounds and ten times blinking
of all the windows, and by the display of “SLP” in window number 2. All other windows
are blanked. This mode is terminated by pressing control button number 6.
The graphic display (window no. 6) provides for more
functional and visual convenience. Displaying training
diagrams, user guidance and hints are functions that
can only be displayed on a graphic display.
Window no. 6
LCD Graphic Display
See page L1 for
explanation about
the display
The dashboard shows a Graphic LCD in its
center (see page 4). You will find a special
description of this equipment part and
its operation in appendix L (LCD Grafic Display).
General information
Setting up
Switching On / Off
Please read the Notes on Safety (page 19)
before switching the ergo_lyps fitness on,
and follow the installation and assembly
instructions (pages M1 - M10).
The On/Off switch (power switch) is located
above the device, just before the curvature of
the metall frame on the perforated plate. (see fig. to the right)
The ergo_lyps should be switched off by mean of the
On/Off switch or by pulling the power cord plug
from the power outlet.
(This does not apply for the values of the “guest” user.)
Always press the Reset key before switching the
device off in order to save the distance covered
in kilometers.
“Stand-By mode” ( SLP )
Display-
window
Window no. 2
Please note:
The value of the daily kilometer counter (the wide arrow pointing to Distance) will
always be added to the total kilometer counter (the arrow pointing to User/Km Total),
1. if the ergo_lyps goes in Stand By mode ( SLP-Mode ).
2. or if the Reset key is pressed, or when
3. another person starts a session and another user identification number is selected.
