DAXYS STALLION Manuale utente
STALLION
Electric MTB
USER MANUAL v1.0
STALLION USER MANUAL
Please keep the User Manual properly and carefully read it to
understand the performance of the E-bike before use.
TABLE OF CONTENTS
INSTRUCTIONS FOR USERS..........................................................................................................................................................2
SPECIAL NOTES FOR RIDING SAFELY.........................................................................................................................................3
PRECAUTIONS BEFORE RIDING...................................................................................................................................................4
ABOUT E-BIKES...............................................................................................................................................................................5
HOW TO OPERATE E-BIKES...........................................................................................................................................................6
DISPLAY GUIDE..........................................................................................................................................................................7-13
TROUBLESHOOTING...............................................................................................................................................................14-15
F.A.Q’S.......................................................................................................................................................................................16-19
WARRANTY....................................................................................................................................................................................20
TECHNICAL SUPPORT CONTACT INFORMATION.....................................................................................................................21
DAXYS STALLION - USER MANUAL
1
INSTRUCTIONS FOR USERS
Dear Users,
Thank you for choosing our products. The User Manual mainly introduces the common sense of use and maintenance of
our E-bike. Please carefully read the Manual after purchase to understand the performance, characteristics, precautions and
maintenance of the E-bike. For your safety, always ensure that the E-bike is in its best service state.
Please use the genuine spare parts for your riding safety and contact our authorised service station if you have any question.
2
The gures and text descriptions in this Manual are
for illustration of operation only.
The illustrations in this Manual may be inconsistent
with the actual product. And the actual product shall
prevail.
The Company reserves the right to improve product
performance and relevant configurations without
prior notice.
The E-bike is for a single rider only. Please don't
carry anyone.
Please keep the battery lock key of the E-bike
properly.
IMPORTANT NOTES
Need Support?
Post-Sales Support Contact
Scan the QR code or email below address:
Need Repairs?
To find an Authorised Service Partner and
book a service - scan the QR code or head to:
https://service.panmi.com.au
Congratulations
on buying from an
authorised local
distributor.
What does “Panmi Authorised Reseller” mean?
“Panmi Authorised Reseller” products have been imported
under authorisation of the manufacturer and adapted to
suit local requirements. You can rest assured knowing
your product is certified and covered by all the
required consumer assurances.
Warranty
Scan the QR code or head to:
https://www.panmi.com.au/warranty/
SPECIAL NOTES FOR RIDING SAFETY
For sake of your safety and prevention of accidents, please read and observe the following precautions:
First: When using electric bicycles, you should abide by traic laws and pay
attention to riding safety.
1. Always wear a helmet when riding.
2. Since the braking distance will be extended in rainy and snowy days, please slow down. Do not ride in severe weather such
as rainstorm.
Second: Pay attention to the riding safety of E-bike.
1. Do not park the E-bike in the building lobby, escape stairs, walkways and emergency exits.
2. Do not charge and park the E-bike in the residential building. Keep it away from combustibles during charging. The
charging time shall not be too long.
3. Proper use and maintenance of the battery:
• Do not short-circuit the positive and negative poles of the discharging port and charging port of the battery pack;
• Do not knock or squeeze the battery pack;
• Pay attention to waterproong and prevent the battery pack from being exposed to water and water immersion;
• Do not throw the battery pack into a re, and keep it away from children, re sources and heat sources;
• Do not charge the battery when using the E-bike. Please power o the instrument before charging;
• It is recommended to charge when the battery state of charge (SOC) is lower than 15%. When the E-bike is not used for a
long time, please remove the battery pack for storage and charge it every 3 months;
• Always use the genuine battery pack of the Company.
4. Safe use of charger:
• For charging, rst plug the output port of the charger into the charging port of the battery pack, and then insert the AC power
plug of the charger into the mains socket;
• Do not remove or modify the charger;
• Do not plug or unplug the power plug with wet hands;
• Do not use the charger in thunder and lightning weather;
• During charging, the charger indicator is red. Green indicator of the charger indicates that the battery pack is fully charged;
• Always use the genuine charger of the Company to charge the battery pack. Otherwise, the battery pack may overheat,
catch re or even explode;
• Slight heating of the charger and battery during charging is normal.
5. Take care not to expose the safety line marks of stem and saddle tubes (if applicable) during adjustment of handlebars or
saddle.
3
4
PRECAUTIONS BEFORE RIDING
For sake of your safety and prevention of accidents, please check the followings before riding and repair in time or
seek for professional maintenance in case of any abnormality.
1. Inspection of power circuit and lighting circuit
• Check the power, lighting, motor and other circuits for damage;
• Turn on the instrument power switch, operate the lighting switch, and check whether the front light is on;
• Adjust the instrument buttons and check whether the upshift and downshift work properly; press and hold the "-" button to
check whether the walk assist mode works properly; depress the foot pedal hard to see if the bicycle is power-assisted;
• Check the front and rear brake levers respectively for motor power failure.
2. Inspection of brake device
• Check whether the front and rear brakes work properly;
• Check the braking eect of the front and rear brakes to ensure that the brakes are working eectively.
3. Inspection of tightening of handlebars and front and rear wheels
• Shake the handlebars up and down, front and back, left and right to check for looseness or collision;
• Shake the front and rear wheels to check for looseness; rotate the wheels to check whether they are too tight or stuck
4. Inspection of tyres
• Check whether the tyre pressure is normal;
• Check tyres for cracks;
• Check the tyre for sharp objects such as nails;
• Replace the tyres in time when the tread wear indicators are exposed.
5
ABOUT E-bike
* Please note that this is a general instruction manual. Therefore, the frame style of the e-bike you have may dier from the
picture shown in this manual.
Start E-bike
1 Press and hold the power button on the instrument until the display screen is turned on to start the bicycle.
* For night riding, press and hold the "+" button on the instrument to turn on the front light.
2 The instrument displays the speed, total ODO, TRIP distance, power-assisted gear, SOC and other data. The motor can
provide power assistance only when the power-assisted gear is gear 1 or above and the E-bike pedal is depressed to move
forward. The power-assisted gear (1-5 gears; power-assisted gears on the instrument vary with models) can be adjusted
through the instrument gear control button. The electronic control system will output matching power according to the
power-assisted gear selected to achieve the desired eect.
Start your rst ride
Take care when you are ready to ride, as in the electric power-assisted mode, the E-bike will run faster than an ordinary
bicycle. It is recommended to start riding from gear 1.
* The power-assisted gear 1 is the most power-saving riding mode;
* The power-assisted gear 2-3 is suitable for o-road and forest riding;
* The power-assisted gear 4 is suitable for climbing;
* The power-assisted gear 5 provides the maximum assist regardless of battery consumption.
Factors aecting the riding mileage
Many factors can aect the battery energy performance and riding mileage, including:
*Riding on rugged roads and hilly terrain will consume more battery energy;
*Frequent speed changes will consume more battery energy;
*Carrying more weights on the E-bike will consume more battery energy;
*Keeping the standard tyre pressure can save battery energy for your riding;
*Riding in colder weather will consume the battery energy faster;
*When the E-bike is powered o, it is just like an ordinary bicycle, which can be easily pedaled. In case of a long journey,
you can turn o the power on a at or downhill road and ride the E-bike as an ordinary bicycle, which can save battery
energy.
6
B-COCKPiT L200 User Manual
2
Shenzhen Digitech Co., Ltd. www.riding-evolved.com
Important Information Regarding Safe Operations:
1. Turn OFF the main power of the E-bike before plug / unplug the display, or it may lead
to permanent electrical damage to the display.
2. Do not over tighten the bolts when installing display to E-bike, a torque of
5-6kgf.cm is sufficient to secure display to the handlebar, over tightening the bolts
may cause damage to the display’s structure.
3. Do not immerse the unit in water or clean it with pressurized water. Clean the unit using
a soft cloth dampened only with water. Do not use any detergents.
4. Do not dispose display or any other e-bike components into house-hold wastes,
follow your local regulations and dispose them in an environmental-friendly manner
or recycling.
5. Damage / malfunction caused by improper installation or usage are not covered by
after-sales service.
DISPLAY GUIDE
7
B-COCKPiT L200 User Manual
8
Shenzhen Digitech Co., Ltd. www.riding-evolved.com
◼
Installation
⚫Installing display unit
1. Use 1pcs M3*6 Hex Socket Screws 1
1
-
-
1
1
to secure the mounting 22.2mm bracket to the handle
bar. Tightening torque: 5-6kgf.cm,
Do Not Over tighten or it may cause damage to the display.
⚫Connecting cables
1. Aligning the arrow marks on the display outlet and Ebike outlet connector, and plug the two
cables firmly.
1-1
Arrow marks
Arrow marks
8
Indice
