Ddog YARDMASTER 202S Manuale utente

YARDMASTER 202S

Training Collar System

Operating Guide

Please read this entire guide before using this product.

Important Safety Instructions

Warning – failure to follow these warnings and the usage instructions could result in

serious injury or death.

DO NOT use the static stimulus feature of the collar on dogs with an aggressive temperament.

This may cause them to inflict injuries to the dog owner or others. If you are unsure whether

this product is appropriate for your dog, please consult your veterinarian or certified trainer.

DO ensure that you comply with the fitting instructions in this manual for the collar. Skin

damage (such as redness or bed sores) may develop when a collar has been worn for too long

or made too tight around your dog’s neck. To prevent injury to your dog, please ensure that:

the collar has been fitted properly in accordance with the instructions in the manual

the prongs on the collar do not exert excessive pressure on your dog’s neck

the collar is not worn for more than 12 hours per day

the collar is repositioned on your dog’s neck every 1 to 2 hours

the contact area of the collar is examined daily for signs of skin damage (redness or

sores).

Some dogs are more prone to developing skin conditions than others. It is advised that you

examine the contact area regularly when you first fit the product on your dog to ensure that

your dog is tolerant of the pressure exerted by the collar on its skin. If skin damage occurs

due to the use of the collar, discontinue use of the collar immediately until the damaged area

has healed. If this condition persists beyond 48 hours, consult your local veterinarian.

The collar is designed and tested on dogs and dogs only. DO NOT use the collar on humans

or other animals apart from dogs.

The collar is not a toy. Keep the collar, remote transmitter and the adapter cords out of reach

of children.

DO NOT OPEN THE ENCLOSURE OF THE COLLAR, REMOTE TRANSMITTER OR THE

POWER ADAPTER AT ANY TIME. There are no user-serviceable parts inside. There is a

serious risk of electric shock, fire or death if items are opened.

DO NOT use the adapter with any other equipment.

QUICK START GUIDE

STEP 1 Power Up

Both the remote transmitter and the receiver collar are shipped with a full charge and

can be used right away.

(a) Remote Transmitter: turn the function dial on the remote transmitter from

OFF to any other position. Make sure that the LED light is switched on and

turns into a solid green color to indicate that the remote transmitter is ready for

use.

(b) Receiver Collar: press the blue ON/OFF button at the front of the collar and

wait for the LED indicator light to turn into a solid green light.

STEP 2 Pairing the device

By default, the receiver collar and the remote transmitter have already been paired

prior to shipment. To test whether or not the two devices have been properly paired,

press the toggle button (if required) until the LED light next to the number “1” is

switched on, then press the sound button on the remote transmitter and see whether

the receiver collar responds with an audible tone signal.

Press

If an audible tone signal is detected, it means that the two devices have been

properly paired. Otherwise, please go through the pairing instructions on page 11 of

this operating manual.

STEP 3: Using the collar

The collar should now be ready for use. See pages 10-11 of this operating manual for

an explanation on how to use the various features of the collar.

Table of Contents

1. How does the DDOG® YARDMASTER 202S work?..................................5

2. Included Components ......................................................................................5

3. Product Diagrams..............................................................................................6

4. Technical Specifications..................................................................................6

5. Features ...............................................................................................................7

6. Unboxing the YARDMASTER 202S for the First Time..............................7

7. Using the YARDMASTER 202S for the First Time....................................7

8. Testing the Static Stimulus Function ...........................................................8

9. Fitting and Powering On the Collar ..............................................................9

10. Sound/Tone Function .....................................................................................10

11. Vibration Function..........................................................................................10

12. Static Stimulus Function .............................................................................. 11

13. Pairing a Remote Transmitter with a Receiver Collar........................... 11

14. Charging the receiver collar and the remote transmitter ....................12

15. Replacing the plastic collar strap with the spare nylon strap............13

16. Frequently Asked Questions .......................................................................14

17. Terms of use and limitation of liability .....................................................15

1. How does the DDOG® YARDMASTER 202S work?

The DDOG® YARDMASTER 202S Training Collar System offers a simple and effective way

for home users to train their dogs. By pairing a remote transmitter with a receiver collar, a

user can control the exact moment when a dog will receive a tone, vibration or static

response on the receiver collar. The level of intensity is adjustable for static stimulation (8

levels) and fixed for tone and vibration signals (1 level each). The end result is a training

system that allows users to teach basic obedience commands or thwart unwanted behaviors

using one or a mix of different signals that can be triggered at such time and at such level of

intensity as the users themselves determine as appropriate.

2. Included Components

The following components are included when you purchase the DDOG® YARDMASTER

202S Training Collar System:

Wrist Strap (x1)

Receiver Collar (x1)

Power Adapter (x1)

Test Light Tool (x1)

Remote Transmitter (x1)

Charging Cable (x1)

Nylon Strap (x1)

Nylon Strap Harnesses (x2)

Operating Manual (x1)

3. Product Diagrams

(a) Remote Transmitter

(b) Receiver Collar

4. Technical Specifications

(a) Remote Transmitter

Weight ：45g

Dimensions: 10*4*2cm

(b) Receiver Collar

Suitable neck size：15cm – 53cm (collar strap is adjustable to fit different neck sizes)

Weight ：110g

Dimensions: 8*3.5*4.5cm

5. Features

8 levels of static stimulation and 1 level of vibration and tone signals

500 meters of reception in open field

100% waterproof

Rechargeable and durable

Intuitive transmitter design avoids the need for pre-programming or function toggling

during use

On/off switch on both the remote transmitter and receiver collar to extend battery life

Two color LED light on both the remote transmitter and receiver collar to indicate

different statuses

Patented flexible probes ensures good contact with the dog’s skin

Train up to 3 dogs at the same time using a single remote transmitter

6. Unboxing the YARDMASTER 202S for the First Time

Please check that all of the components listed on page 5 have been shipped with the

packaging box. If any of the components are missing, please contact us or your local

distributor (as appropriate) for customer support.

The remote transmitter and the receiver collar are shipped with a full charge and are ready

for immediate use. Please follow the instructions in the next section on how to use the

DDOG® YARDMASTER 202S Training Collar System.

7. Using the YARDMASTER 202S for the First Time

When using the DDOG® YARDMASTER 202S Training Collar System for the first time, you

should make sure that the receiver collar has been properly paired with the remote

transmitter.

Test for proper pairing

1. To test whether the pairing between the two devices has been properly configured,

switch on the receiver collar by pressing the blue “On/Off” button at the front of the

collar.

Sound Activated Sensor

On/OffButton

Sound Activated Sensor

On/OffButton

2. Next, adjust the function dial on the remote transmitter to a position other than OFF and

press the toggle button (if required) until the LED light next to the number “1” is switched

on to indicate that the remote transmitter will operate at the transmission frequency of

the first paired receiver collar (which by default is the receiver collar that is shipped

alongside the remote transmitter).

3. Next, press the sound button on the remote transmitter and see whether the receiver

collar responds with an audible tone signal.

Press

If an audible tone signal is detected, it means that the two devices have been properly paired.

Otherwise, please go through the pairing instructions on page 11 to pair the receiver collar

with the remote transmitter.

8. Testing the Static Stimulus Function

A test light tool is included with the packaging box for the purpose of testing the static

stimulus function of the collar.

1. To begin testing, place the test light on top of the metal probes as shown below.

Sound Activated Sensor

On/OffButton

2. Then rotate the function dial to a level higher than 2 (otherwise the light emitted will be

too weak to notice) and press the static button on the remote transmitter to trigger a

static stimulus on the receiver collar. If the static stimulus function is working properly,

the test light will start flashing.

Press

9. Fitting and Powering On the Collar

The receiver collar should be fitted snuggly across the top of the dog’s neck (as opposed to

hanging it loosely at the bottom of the neck), yet loose enough to allow the user to slide one

finger inside the strap. The collar casing should be positioned at the front and center of the

neck and not rotated to either side. Both of the metal probes underneath the collar unit

should be in good contact with the skin as shown below. For dogs with thick coats, it may be

necessary to trim the hair underneath the collar unit to ensure that the probes are in good

contact with the skin. Once the collar unit has been fitted, trim down the excess strap to a

suitable length, if required.

Sound Activated Sensor

On/OffButton

Indicator Light (Red/Green)

The plastic collar strap can be removed and replaced with the spare nylon strap that comes

with the packaging. See page 13 for detailed instructions on how this is done.

Press the blue “On/Off” button at the front of the collar. If a solid green light stays on after

momentarily flashing in green and red color, it indicates that the collar is ready for use.

10.Sound/Tone Function

The sound button on the remote transmitter is the trigger for a tone signal on the receiver

collar. Each time the sound button is pressed, provided that the collar and the remote

transmitter are both switched on, a single tone signal will be generated. The collar is pre-set

with only one level of tone signal, so unless the function dial has been parked at the OFF

position, all other positions on the function dial will generate the same identical tone signal

when the sound button has been pressed. If the sound button has been held down, a

continuous stream of tone signals will be generated with a short time gap between each tone

signal.

Press

11. Vibration Function

The vibration button on the remote transmitter is the trigger for a vibration response on the

receiver collar. Each time the vibration button is pressed, provided that the collar and the

remote transmitter are both switched on, a single vibration response will be triggered. The

collar is pre-set with only one level of vibration response, so unless the function dial has been

parked at the OFF position, all other positions on the function dial will generate the same

identical vibration response when the vibration button has been pressed. If the vibration

button has been held down, a continuous stream of vibration responses will be generated

with a short time gap between each vibration response.

Sound Activated Sensor

On/OffButton

Sound Activated Sensor

On/OffButton

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Ddog Prodotto per la cura degli animali domestici

Ddog

Ddog DC-001 Manuale utente

Manuali Prodotto per la cura degli animali domestici popolari di altre marche

Schwinn

Schwinn Rascal Manuale utente

K&H

K&H Small Animal Manuale utente

SHOR-LINE

SHOR-LINE 006.3230.00 Manuale utente

Petsafe

Petsafe Stubborn Dog Receiver Collar Manuale utente

Datamars

Datamars OMNI MAX Manuale utente

Trixie

Trixie 24444 Manuale utente

Roverpet

Roverpet 30DDPP Manuale utente

SportDOG

SportDOG SD-105S-C Manuale utente

Staywell

Staywell 400 Series Magnetic Manuale utente

Dogtek

Dogtek Sonic Birdhouse Manuale utente

Togfit

Togfit Deluxe Trigger Lock Door Gate Manuale utente

Girafus

Girafus 227PA Manuale utente

ubbink

ubbink KoiFeeder Solar Manuale utente

ULTRACOM

ULTRACOM KOIRA-GPS Manuale utente

CADOCA

CADOCA Deuba 106911 Manuale utente

Dogtra

Dogtra RR Deluxe Manuale utente

Carson

Carson CONVERTIBLE PET YARD 2200 Manuale utente

Creative Cedar Designs

Creative Cedar Designs K-9 Kabin Manuale utente