Deco Gear DGVIEW250F Manuale utente
SAFETY WARNINGS AND GUIDELINES.................... 3
PACKAGE CONTENTS................................................ 5
PRODUCT OVERVIEW................................................ 6
INSTALLING THE STAND............................................ 7
MOUNT INSTALLATION............................................... 8
BASIC OPERATION.................................................... 10
ON SCREEN DISPLAY................................................ 11
OSD MENU MAP......................................................... 12
SPECIFICATIONS....................................................... 15
PRODUCT WARRANTY.............................................. 17
5
Please take an inventory of the package contents to ensure you have
all of the items listed below. If anything is missing or damaged, please
contact customer service for replacement options.
1x 25" Monitor
1x DP Cable
1x A1 Stand Base
1x A2 Stand Stem
1x Base Screw
1x Type-C Cable
4x A3 Wall Mount Screws
1x Power Adapter
1x User's Manual
1x Power Cable
1 Press Rocker up: Crosshairs shortcut; OSD menu navigation.
2 Power Button: Turn off monitor (longpress); put monitor to sleep
(quick-press)
3 Press Rocker to the left: RGB Range shortcut. (When connect-
ing a Type-C device (phone, laptop, etc.) and using the monitor in
portrait mode (vertical position), open the Port Selection menu by
press-and-holding the Rocker to the left
device.
navigation
. Then select the appropriate
4 Press Rocker down:display scene mode shortcut; OSD menu
5 Press Rocker to the right:OSD shortcut; menu input selection
6 7 8 9 10
HDMI 2.0 HDMI 1.4
6 Audio Output
7 DisplayPort
8 HDMI Ports
9 Type-C Port
10 Power
Monitor resolution and refresh rates are largely dependent on the type of
connecting cable used. For optimal refresh rates, we recommend using
DisplayPort connectors whenever possible.
Keep the foam underneath the monitor while attaching the stand.
1. Open the package, take out the product with foam still attached, and gently
place it on a desktop or table.
2. Take out the two main parts of the stand and remove the foam covering the top
of the monitor. Release the screw attached on the base (A1), then attach the
stand base (A2) to the stand stem. Tighten the screw back to the base (A1).
Stand Base
Stand Stem
A1
A1
A2
A2
3.
4. Place the monitor on your desktop or table after completing installation.
To avoid damage, do not touch the screen when moving the monitor.
This monitor includes screws that may only be used when attaching the
monitor to a mount. No mount or mounting accessory is included.
1. Open the package, take out the product with foam still attached, and gently
place it on a desktop or table. Remove the extra parts and the foam covering the
monitor. If the monitor was already attached to the stand, remove the stand.
Buckle the assembled bracket chassis on the whole monitor (insert the upper
part and press down). If you want to remove the bracket chassis, pull down
the button on the rear shell to remove the bracket chassis
Stand Base
Stand Stem
2. Remove the original screws ( 1 ) from the opening in the back of the monitor.
Then use the included 4x A1 screws to attach the adapters inside the opening.
- Do not discard the original screws.
- Use only the Screws ( 2 ) provided.
3. Follow the directions received with your mount, stand, or accessory and install
Mount
(Not included)
Adaptive Sync
Adaptive sync eliminates image tearing, stuttering and ghosting by adjusting of a
monitor’s vertical refresh rate to the frame rate of the graphics card. It is compatible
with GPUs that use popular sync features. The feature is off on Deco Gear monitors
by default and must be manually enabled in the monitor’s OSD (see Section 8: OSD).
To use this feature, the connecting device must be compatible with adaptive sync;
have the latest graphic drivers; and be connected to the monitor using a DP cable.
4x A3 Wall Mount Screws
(included)
4x Screws
(original for desk mount)
lndicator Light
Basic Operation
1. Insert one end of the DP cable (included) into your PC’s graphics card. An HDMI
cable (not included) or, in some cases, a Type-C cable, can also be used.
Monitor resolution can be limited based on the input/cable used (i.e., DP vs
HDMI).
2. Connect the other end of the cable to the corresponding port on your monitor.
DP Port Type-C Port
Audio Out
HDMI Ports
3. Connect the power cable to your monitor, then connect the other end to your
power source. It is recommended that you use a surge protector with adequate
voltage if a wall outlet cannot be reached directly.
4. Locate the power button on the monitor and press and hold it for ~6s to turn the
monitor on.
If you cannot locate the power button, please refer to Section 3.1.
Solid blue light indicates power is on and the monitor
is operating normally. Flashing blue light indicates
been detected or voltage is low. Please ensure
your computer is on and all video cables are fully
connected. Indicator light
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Deco Gear Monitor
