Dectris MYTHEN Manuale utente

DECTRIS Ltd.

5405 Baden- Daettwil

Switzerland

www.dectris.com

Socket Interface

Specification

MYTHEN Detector System

Version:

3.0.0

Document Version:

Socket Interface Specification. MYTHEN Detector System. Version: 3.0.0, Document Version: 2 2/34

Socket Interface Specification. MYTHEN Detector System. Version: 3.0.0, Document Version: 2 3/34

Table of Contents

1. Document History 5

1.1. Current document 5

1.2. Changes 5

2. How to use this guide 6

2.1. Address and Support 6

2.2. Explanation of Symbols 7

2.3. Explanation of Terms 7

2.4. Disclaimer 8

3. Warnings 9

4. Introduction 10

5. Operation 11

5.1. Connecting to the server 11

5.2. Initialization 11

5.3. Settings 12

5.3.1. Predefined Settings 12

5.3.2. Setting Threshold and Energy 12

5.3.3. High frame rates 12

5.4. Acquisition control 12

5.5. Data corrections 13

5.6. Triggering and gating 13

5.7. Debugging 13

6. Example Applications 14

7. Commands 15

7.1. Command list 15

7.1.1. General commands 16

7.1.2. Acquisition control 18

7.1.3. Detector settings 20

7.1.4. Data correction 22

7.1.5. Trigger / Gate 23

7.1.6. Debugging 25

7.1.7. Deprecated commands 26

7.2. Error Codes 28

7.3. Decoding the raw data 29

8. Release Notes 30

8.1. Version 3.0.0 30

Socket Interface Specification. MYTHEN Detector System. Version: 3.0.0, Document Version: 2 4/34

8.1.1. Modifications 30

8.1.2. Migration notes 31

8.1.3. Legacy2 mode 31

8.2. Version 2.1.0 31

8.3. Version 2.0.5 31

8.4. Version 2.0.4 31

8.5. Version 2.0.3 32

8.6. Version 2.0.2 32

8.7. Version 2.0.1 32

8.8. Version 2.0.0 32

8.8.1. New Functionalities 33

8.8.2. Migration notes 33

8.8.3. Legacy Mode 33

9. Appendix 34

9.1. Table of Tables 34

9.2. Referenced Documents 34

Socket Interface Specification. MYTHEN Detector System. Version: 3.0.0, Document Version: 2 5/34

1. Document History

1.1. Current document

Version

Date

status

prepared

checked

released

3.0.0 DV2

04.02.2016

ready for release

1.2. Changes

Version

Date

Changes

3.0.0 DV2

04.02.2016

New postal address

3.0.0 DV1.1

11.06.2013

Adapted CD

3.0.0 DV1.0

21.09.2012

Simplified operation of the detector system

Better data quality due to optimized calibration

Restricted threshold and energy ranges

By default all commands affect all active modules

Socket Interface Specification. MYTHEN Detector System. Version: 3.0.0, Document Version: 2 6/34

2. How to use this guide

Before you start to operate the MYTHEN detector system please read the User Manual and the Technical

Documentation included in the documentation package carefully.

This document has been designed for the MYTHEN detector systems.

2.1. Address and Support

DECTRIS Ltd.

Taefernweg 1

5405 Baden-Daettwil

Switzerland

Phone: +41 56 500 21 02

Fax: + 41 56 500 21 01

Website:

www.dectris.com →support →Technical Notes →MYTHEN

www.dectris.com →support →FAQ

www.dectris.com →support →Problem Report

Email:

[email protected]

Should you have questions concerning the system or its use, please contact us via phone, mail or fax.

Do not ship the system back before you receive the necessary

transport and shipping information!

Socket Interface Specification. MYTHEN Detector System. Version: 3.0.0, Document Version: 2 7/34

2.2. Explanation of Symbols

Symbol

Description

Important or helpful notice

Caution. Please follow the instructions carefully to

prevent equipment damage or personal injury.

DC-current

AC-current

Ground

Functional earth

2.3. Explanation of Terms

Term

Description

GUI

Graphical User Interface

DCS1

Detector Control System for 1detector module

DCS6

Detector Control System for up to 6detector modules

DCS24

Detector Control System for up to 24 detector modules

Detector module

The smallest fully functional unit of the detector (1280

channels).

MCB

Module Control Board

FIFO

Storage working according to the First In - First Out

principle

keV

Kilo electron Volt

Socket Interface Specification. MYTHEN Detector System. Version: 3.0.0, Document Version: 2 8/34

2.4. Disclaimer

DECTRIS Ltd. has carefully compiled the contents on this manual according to the current state of knowledge.

Damage and warranty claims arising from missing or incorrect data are excluded.

DECTRIS Ltd. bears no responsibility or liability for damage of any kind, also for indirect or consequential damage

resulting from the use of this system.

DECTRIS Ltd. is the sole owner of all user rights related to the contents of the manual (in particular information,

images or materials), unless otherwise indicated. Without the written permission of DECTRIS Ltd. it is prohibited

to integrate the protected contents published in these applications into other programs or other Web sites or to

use them by any other means.

DECTRIS Ltd. reserves the right, at its own discretion and without liability or prior notice, to modify and/or

discontinue this application in whole or in part at any time, and is not obliged to update the contents of the

manual.

Socket Interface Specification. MYTHEN Detector System. Version: 3.0.0, Document Version: 2 9/34

3. Warnings

Please read these warnings before operating the detector system.

DO NOT TOUCH THE ENTRANCE WINDOW OF THE DETECTOR.

Place the protective cover on the entrance window of the detector when it is not in use.

The detector is not specified to withstand direct beam at a synchrotron. Such exposure will damage the

exposed channels.

The detector system should have enough space for proper ventilation. Operating the detector outside the

specified ambient conditions could damage the system.

The air inlets and outlets of the detector control system should not be blocked.

Power down the detector system before connecting or disconnecting any cable.

Before connecting the power supply to the mains-supply, check the supply voltage with the label on the

power supply. Using an improper main voltage will destroy the power supply and could damage the

detector.

Make sure the cables are connected and properly secured.

Avoid pressure or tension on the cables.

Opening the detector, the detector control system or the power supply housing without explicit instructions

from DECTRIS Ltd. will void the warranty.

The embedded Linux operating system on the detector control system has customized software for

controlling the MYTHEN detector system. Do not make any changes to the Linux operating system without

explicit instructions from DECTRIS Ltd.

Socket Interface Specification. MYTHEN Detector System. Version: 3.0.0, Document Version: 2 10/34

4. Introduction

The detector control system (DCS) hosts an embedded Linux system, on which the MYTHEN Socket Server is

running. The DCS also stores the calibration files for the detector as well as some network settings. A client can

open a socket connection to the server and control the MYTHEN detector by sending the commands listed in

Chapter 7. Example applications in C++ for Linux and Windows are provided on the system memory stick. A spec

implementation based on this socket interface is available from http://www.certif.com.

To take advantage of new functionality and bug fixes, it is possible to update to a newer version of the MYTHEN

Socket Server within the same major release. The configuration files and the network settings stored on the DCS

will not be affected by the update. The required files can be downloaded from the DECTRIS Ltd. website

http://www.dectris.com.

An upgrade to a new major release usually requires a recalibration of the detector by DECTRIS Ltd. and is

therefore not possible to be performed by the customer. If you are interested in a major upgrade please contact

[email protected].

Indice

Altri manuali Dectris Sensore di sicurezza

Dectris

Dectris PILATUS3 X Manuale utente

Dectris

Dectris PILATUS3 X CdTe 2M Manuale utente

Dectris

Dectris EIGER 2 XE CdTe 16M Manuale utente

Dectris

Dectris PILATUS3 R Manuale utente

Dectris

Dectris PILATUS3 R Manuale utente

Dectris

Dectris PILATUS 1M Manuale utente

Dectris

Dectris PILATUS 1M Manuale

Dectris

Dectris EIGER2 X 500K Manuale utente

Dectris

Dectris PILATUS3 R Manuale utente

Dectris

Dectris PILATUS 3 R 100K-M Manuale utente

Dectris

Dectris PILATUS3 R Manuale utente

Dectris

Dectris EIGER2 R 250K Manuale utente

Dectris

Dectris PILATUS 300K-W Manuale utente

Dectris

Dectris EIGER2 S 1M-RW Manuale utente

Dectris

Dectris EIGER2 X 500K Manuale utente

Dectris

Dectris PILATUS3 S Manuale utente

Dectris

Dectris QUADRO Manuale utente

Dectris

Dectris PILATUS3 S 6M-NSRRC Manuale utente

Dectris

Dectris PILATUS3 R Manuale utente

Manuali Sensore di sicurezza popolari di altre marche

THORLABS

THORLABS PDA10JT Manuale utente

Waeco

Waeco UV-DETECT Manuale utente

Intermatic

Intermatic IOS-DSIMF Manuale utente

urmet domus

urmet domus 1083 Manuale utente

Siemens

Siemens AZL66 Series Manuale utente

BTI

BTI Profiline Multi Finder Manuale utente

Challenger

Challenger SL01 Manuale utente

DMP Electronics

DMP Electronics 1122INT Manuale utente

Rielta

Rielta Ladoga MK-RK Manuale utente

Mirion Technologies

Mirion Technologies ACCURAD PRD Manuale utente

Bosch

Bosch DS835 Manuale utente

DBI SALA

DBI SALA EZ Stop Manuale dell'operatore

Lamptime

Lamptime ST05C Manuale utente

Ubiquiti

Ubiquiti MFI-MSC Manuale utente

Subsite

Subsite 910R Istruzioni per l'installazione

Satel

Satel OPAL Pro Manuale utente

Aleph

Aleph XC-1XTEU Manuale utente

Pima

Pima LARIS QUAD Manuale utente