DEDAKJ K-HF55e Manuale utente
USER MANUAL OF
FOOT SPA BATH MASSAGER
K-HF55e
The picture is for reference only!
In order to better use this product, please read the manual before use!
Operator: Shenzhen Deda Medical Technology Group Co., Ltd.
Address: Building 39-1, Universiade Software Town, 8288 Longgang Avenue,
Henggang Street, Longgang District, Shenzhen
Tel：0755-89760988 Fax：0755-89760688
Email:service@dedakj-health.com
Website: www.dedamed.com Service hotline: 400-830-2119
Manufacturer Address:Deda Industrial Park, Jianshe Avenue,
Huaihua High-tech Zone, Hunan Province
MADE IN CHINA
Come from German Create the Quality Life
DEDAKJ is the German brand that was exclusively agented by Deda
Group. The R & D center is located in Munich, Germany. The R & D
team is consisted of international industry leaders, professors,
overseas doctors, masters and industrial senior engineers. DEDAKJ
is operated around three health sectors of high-end medical
devices, healthcare devices and health appliances. At present, the
products cover the household health oxygen instrument, medi-
cal-level oxygen instrument, atomizer, blood-pressure meter,
podiatry machine, eye protection instrument, cervical massager,
massage chair, knee physiotherapy device, vision training instru-
ment, electric toothbrush, tooth-washing device, water purifier,
etc. DEDAKJ is committed to allowing people’s life to be more
high-quality, with inheritance of moral quality as its initial heart,
fashion appearance and modern technology as its brand personali-
ty!
Preface
Structure diagram
Control panel and remote control
Operating instructions
Specifications
Common faults and troubleshooting
01
02
03
04
07
08
09
10
12
13
Precautions
Product maintenance and storage
Tips
Warning
01
Thank you for purchasing the DEDAKJ smart foot spa bath massager. In order to
use the machine correctly, please read the contents of each part of this manual
carefully before use, especially the relevant precautions. Please keep this manual
in a safe place so that you can read it at any time when necessary.
The following people please follow the doctor's advice (if users are in the
following conditions, please listen to the doctor's advice and manual before use)
Mentally ill
Those who have a pacemaker or artificial organ implanted in the body
People with heart function disorders, neurological hypertension
Patients with uncured cerebral hemorrhage, patients with severe thrombosis
Patients with bleeding disorders, sepsis, fever, etc.
Women during menstruation or pregnancy
Those who are slow to respond to temperature or lose consciousness
Children and people with intellectual disabilities use it with the help of adults
CATALOG
Structure diagram Control panel and remote control
Concealed handle Function selection panel
Surf outlet
Massage tray
Massage beads
Bobbin
Base
Moving wheel
Medicine box
Filter
Drain switch
Dust cover
Barrel
Power cable
02 03
1. Start button: control the start and standby of the
whole machine;
2. Mode button: control adult, child, and smart mode
switching;
3. Massage button: control electric massage on/off (child mode does not
have this function);
4. Timing button: circulate for 60 minutes and increase by 10 minutes;
5. Disinfection button: control the on/off of the disinfection UV lamp. This
(Remote control)
Smart
04 05
Operating instructions
1.Start button: after turning on the machine, press the "ON(Start)" button once,
the screen shows the current water temperature. "Adult" mode default setting
temperature 42℃, heating surfing; reaching the setting temperature 42℃, it will
shut down automatically after 60 minutes of constant temperature;
2.Mode key: After turning on the machine, press the "mode" button once to
switch to the "child" mode, the default setting temperature is 35℃, heating
surfing; reaching the setting temperature of 35℃, it will automatically shut down
after 15 minutes of constant temperature (no massage function when “child”
mode); first power-on, the default setting temperature is 40℃, heating surfing;
reaching the setting temperature of 40℃, the constant temperature will automat-
ically shut down after 60 minutes; the "smart mode" parameters can be modified
and saved immediately during operation, such as heating temperature, whether
to massage ( after reaching the set temperature, it will automatically start the
massage), timed minutes, next time you turn on the machine, press the "mode"
button to switch to the "smart mode" and automatically remember the last smart
mode setting;
3.Massage button: after turning on the machine, press the "massage" button once
to turn on the electric massage; press the "massage" button again to stop the
electric massage; press the "massage" button for 3 seconds in the smart mode to
switch four movement modes of massage tray :"Massage tray rotates all the
time", "Massage tray rotates for 3 seconds and stops for 1 second", "Massage tray
rotates for 6 seconds and stops for 2 seconds", "Massage tray rotates for 8
seconds and stops for 3 seconds".
button can turn on the UV disinfection function in the non-activated state, and
cannot turn on the UV disinfection function in the activated state;
6. Temperature+button: control water temperature increase;
7. Temperature-button: control water temperature decline.
NOTE:
Do not splash water or other liquids on the control panel.
Do not press the button too hard to avoid program errors.
Do not use the machine without water and standing.
06 07
4. Timing button: After turning on, press the "timing" button for the first time to
display the current remaining time; press the "timing" button again within 3
seconds to display the current timing minutes; each time you press it, the timing
is "0~60 minutes" Increment by 10 minutes in sequence, no operation within 3
seconds after the timing setting is activated, the timing is completed;
5. Disinfection button: Disable the UV disinfection lamp when it is turned on and
running. When the button is touched, the buzzer will sound 2 "DiDi" to indicate
that there is no response to the operation; in the standby state, press the
"Disinfection" button once to start the UV disinfection function , Timing 3
minutes, automatically shut down after 3 minutes of disinfection ;
6. Temperature + button: After powering on, press the "temperature +" key for the
first time to display the current "constant temperature setting value", and switch
to the real-time water temperature after 3 seconds; press the "temperature +" key
again within 3 seconds, and the setting temperature will increase by 1 If there is
no operation within 3 seconds, switch to real-time water temperature. The
highest temperature is 48℃;
7. Temperature - button: After powering on, press the "temperature-" key for the
first time to display the current "constant temperature setting value", and switch
to the real-time water temperature after 3 seconds; press the "temperature-" key
again within 3 seconds to set the temperature to decrease by 1 If there is no
operation within 3 seconds, switch to real-time water temperature. The lowest
temperature is 35°C.
Specifications
Product Model
Product Name
Rated Voltage
Rated Frequency
Rated Power Thermal Efficiency Grade
Executive Standard
The company reserves the right to change the product design without
prior notice.
K-HF55e-A / K-HF55e-E
Foot Spa Bath Massager
110V~ / 230V~
60Hz / 50Hz
850W >80%
EN55014 EN60335 FCC PART 15 B
Highest Temperature
Operating Method
Display Method
Heating Method
48℃
Touch Key Switch
LED Indicator
Pump pressure cycle heating
Common faults and troubleshooting
Common faults
Fault code
E1/E2
Fault code HH
No power
Reason
Water temperature
sensor abnormal
Add hot water tem-
perature over 53 ° C,
anti-high temperature
burns protection start
Power plug is not
inserted
Make sure there is cold water, after power off and
restart, if still cannot be used normally, please contact
the seller for repair
Add cold water, the water temperature is reduced to
53 ° C, and the protection can eliminate
Plug the power plug according to the correct method
No heating
Not working or
stopped
working
halfway
Not boot, display "OFF"
No power
Power on, press the "Start" button, "OFF" display
eliminates
Plug the power plug according to the correct method
and start the machine
Timing time to the
automatic shutdown
Abnormal protection
shutdown (such as anti-
wire, anti-dry burning,
sensor abnormalities,
etc.)
restart the machine
Make sure there is cold water, after power off and
restart, if still cannot be used normally, please contact
the seller for repair
Elimination method
Scale
Special statement
This product has undergone a strict water test before leaving the factory, and a small amount of
water beads may remain in the product, which is normal and does not affect the quality of this
product, please use it with confidence. The drainage system design of this product can basically
exclude the residual water in the internal pipeline of the machine at the lowest point of the water
level. However, it is recommended to flush the inside of the cylinder with clean water after use to
prevent the breeding of bacteria.
Water is heavy or dirty Flush after 10 minutes with white vinegar
0908
If you need to add solid drugs in the bath, please wrap the drugs with gauze and
put them in the medicine box for use, so as not to block the filter screen and the
internal pipeline of the machine, resulting in machine failure;
Do not use the machine without water, it may damage the machine, and it may
be dangerous;
Do not use the machine standing up in order to avoid the danger of falling or
damaging the machine;
Do not operate the machine with wet hands and do not use the machine near
an open fire;
Precautions
Product maintenance and storage
Do not use the machine in a wet place such as bathroom or swimming pool;
When the ambient temperature is lower than 0℃, no water is allowed to be
stored in the product to avoid freezing damaged parts;
Please stop using when you feel uncomfortable (such as dizziness, headache,
etc.);
Do not move the machine during use to avoid fire;
If the liquid leaks from the appliance, the appliance can no longer be used;
If the machine is found to be out of order or abnormal, stop using immediately,
and consult with our company or the company's maintenance center or repair,
do not disassemble and repair by yourself;
If the power line is damaged, in order to avoid danger, it must be replaced by
the manufacturer or the maintenance department, or by professional personnel;
The surface of the appliance is hot and the user is not sensitive to heat;
After use, turn off the switch and unplug the power plug from the socket.
Please wipe and clean the surface of the product with a soft cloth.
Please use a soft cloth dipped in water or neutral solvent to clean the dirty
place, and then dry with a dry cloth;
Make sure the power switch is off and the power plug has been pulled out of the
socket.
Please keep the product clean and away from places with high humidity or high
temperature and the environment with volatile gas.
If the product is not used for a long time, please put it in the box to prevent it
from falling into dust.
Do not unplug the power plug with wet hands;
Do not rinse or soak the product with water, or spill water or other liquids on the
internal circuit parts of the product.
Do not use benzene or thinner and other corrosive cleaners to clean the
product, otherwise it may cause the product to fade, the product structure is
corroded, cracking;
Do not place the product in direct sunlight or high temperature, so as not to
cause discoloration of the product.
Before cleaning, make sure the power switch is turned off and the power plug is
unplugged from the socket.
10 11
12 13
Please do not use the machine in the bathroom or other places with damp air. If
the machine is soaked in water accidentally, please do not use it. It should be
repaired and dealt with by our company or distributor.
Please use this product in the environment of 0-40C;
Do not store and use the machine near the heater or electric furnace to avoid
sunshine;
This product is only for home use and not for commercial purposes;
Please be sure to check whether there is any of the following phenomena when
using for many years:
There is a burnt smell after touching the wire sometimes power, sometimes
power off;
Power cord heating;
Other exceptions.
In case of any of the above phenomena, please stop using the product in order
to prevent the occurrence of faults and accidents.
Cut off the power switch, unplug the power plug, and contact the dealer or our
company from which you purchased this product;
Do not disassemble or repair by yourself.
Tips Warning
14 15
서문
구조 설명도
패널과 리모컨 제어
조작 설명
규격 인자
자주 발생하는 고장과 제거
15
16
17
18
20
21
주의사항
제품 관리 및 저장
포근한 힌트
경고
22
23
24
25
목록
DEDAKJ 스마트 족욕기를 선택해주셔서 감사합니다.사용 전에 본 설명서의 각 부분,
특히 관심사항이 있는 부분을 잘 읽어서 정확하게 사용하도록 하십시오.이 설명서를
필요할 때마다 잘 보관하여 주십시오.
이하 분은 의사의 지시에 따라 사용하시기 바랍니다(사용자의 경우, 사용 전 의사의 의
견 및 지시를 받으시기 바랍니다)
정신병 환자
체내에 박동기 또는 인공기 장기를 삽입한 경우
심장기능에 장애가 있는 경우, 신경성 고혈압인 경우
뇌졸중 미치유자, 심한 혈전 환자
출혈성질환, 패혈증, 발열증 등 환자
여성의 생리기간 또는 임신기간인 경우
온도 반응에 둔감하거나 의식을 잃은 경우
아동 및 지적장애인은 반드시 어른의 간병 아래 이용을 도와야 한다
Indice
Altri manuali DEDAKJ Massaggiatore
