Dedicated Micros DV-IP Decoder Manuale utente
DV-IP Decoder Setup Guide
Introduction 4
How this Manual has been Constructed 5
Installing the DV-IP Decoder 6
DV-IP Decoder Connections and LEDs 6
Rear Panel Connection 6
Front Panel LEDs 7
Unpacking the DV-IP Decoder 8
Safety Notes 8
Regulatory Notes FCC and DOC Information 9
CE Mark 9
Installation 10
Tools Required 10
Recommended PC Specification 11
Step 1 Connecting the Rack Mounting Brackets 12
Step 2 Connecting Monitor Outputs 13
Step 3 Connecting to the Network 13
Step 4 Connecting serial devices 14
Step 5 Termination Dip Switches 16
Step 6 Connecting Power 17
Step 6a Allocating an IP Address 17
Step 7 Locating the DHCP Allocated IP Address 20
Step 8 Setting and Enabling Passwords 21
Configuring the DV-IP Decoder 25
Web Page Icons 25
Dedicated Micros Page 1
Contents
Accessing the Configuration Web Pages 26
How to Configure Global Parameters 27
How to Enable System Features 29
How to Configure Video Outputs 30
Configuring the Network Settings of the DV-IP Decoder 32
How to Enable and Configure Serial Ports 33
How to Enable and Configure the On-board Firewall 35
IP Address Range and Subnet 38
How to Enable System Logs 39
Reviewing the DV-IP Decoder Logs 40
Connection Log 40
Anonymous FTP Log 41
Security Log 41
Logfile 42
Logfile Backup 42
DV-IP Decoder Tools 44
System Variable 44
Reset 44
Appendix A - Resetting the DV-IP Decoder 45
Reset using the Web Interface 45
Reset using Telnet 46
Appendix B – DV-IP Decoder .ini Files 47
Editing the ini Files using FTP Client Application 47
Structure of the Files 49
USER.ini 50
WEBUSER.ini 50
urlprofiles.ini 50
Page 2 Dedicated Micros
Appendix C – Port Assignment on the DV-IP Decoder 52
Port Allocation 52
Appendix D – DV-IP Decoder Serial and Network Cables 54
DM RS232 Debug Cable (supplied) 54
Straight-through Network Cable 55
Cross Over Network Cable 56
Appendix E – IP Address Range and Subnets 57
IP address and Subnet Masks 57
Classes of Networks 58
Calculating IP Address Range 60
Additional Information 62
Command Reference List 62
Dedicated Micros Page 3
The Dedicated Micros DV-IP range has been designed to offer distributed monitoring and
recording of multiple inputs. Combining advanced hardware technology with numerous
sophisticated viewing applications makes the product range the ideal solution for many
applications.
The DV-IP Decoder acts as a receiving station for multiple video images transmitted from NetVu
Connected video servers on the network. The Decoder receives the compressed digital data
from the Ethernet network and converts this into a format that can be displayed on a monitor.
Designed to allow integration of analogue and digital network video and also to offer the
traditional interface for CCTV surveillance. Easy to incorporate into an existing (or new) Central
Monitoring Station the DV-IP Decoder is the interface between the Ethernet network and
supplying analogue video for display on the monitor wall.
The DV-IP Decoder supports five monitor outputs that are able to display a single or multiscreen
display or up to sixteen cameras and has five audio channels to allow connections between
multiple NetVu Connected video servers and a single Decoder allowing the Operator to monitor
and control audio at various sites simultaneously.
The Decoder in conjunction with Netvu Connected video servers can be used to provide a path
between existing analogue installations a Monitoring Station, persistent connections can be
established to ensure the video from the remote sites is continually transmitted across the
Ethernet network. Alternatively one of the Dedicated Micros viewing applications can be used to
provide an interface for dynamic camera to monitor switching.
Supporting numerous network protocols (IP, TCP, UDP, DHCP, FTP, TELNET, ICMP, HTTP, ARP)
the DV-IP Decoder is an ideal choice for a true converged network ensuring compatibility with
new and existing network infrastructure's and also providing the link between the analogue world
and the traditional CCTV monitoring environment.
Page 4 Dedicated Micros
Introduction
One of the unique features of the DV-IP Decoder is the On-board firewall supporting IP filtering
and TCP and UDP port allocation enhancing the security already achieved with the network
firewall and ensuring the unit can not be targeted when connected to a public network.
How this Manual has been Constructed
The DV-IP Decoder manual is divided into sections to allow ease of installation and
configuration.
It will describe the installation process and then the configuration of the unit via both a terminal
application and on-board web pages.
The operation and control of the System is detailed within this manual for web control and also
in the DV-IP Viewer User Guides for dynamic camera switching.
Dedicated Micros Page 5
Page 6 Dedicated Micros
The Installation of the DV-IP Decoder can be carried out in simple steps as described in the
Quick Start Guide; this section will elaborate on this information and the connectivity required for
the Advanced features supported on the DV-IP Decoder.
In addition to detailing the physical connectivity this section also describes some aspects of
configuration that are required to be carried out at installation stage, these are all the serially
configured parameters of the Decoder.
DV-IP Decoder Connections and LEDs
Rear Panel Connection
Power
Video
Monitor Output
Audio
VID1 to VID5 75Ohms BNC composite video input, 1V pk-pK. Not currently used, available
for future expansion
MON 1 - 5 75Ohms BNC composite monitor output, 1V pk-pK
Audio 1 - 5 IN RCA (phono) socket, 8 KHz sampling 47KOhms input impedance
Audio 1 - 5 OUT RCA (phono) socket, line level - amplification required
POWER 8 Pin mini Din, external 12V PSU supplied with unit
Installing the DV-IP Decoder
Important Note: Multi-channel audio is currently unavailable at the moment on the DV-IP Decoder
however Output Channel 1 is operational.
Dedicated Micros Page 7
Data
Alarms and Relays
Front Panel LEDs
ALARMS IN 25 way (female) D Type. Not currently used, available for future expansion
AUX IN Screw terminal. Not currently used, available for future expansion
RELAYS 9 way (female) D Type. Not currently used, available for future expansion
R1 + R2 Screw terminal. Not currently used, available for future expansion
COM 1 - 4 9 way (male) D Type RS-232 serial port (General purpose, debug)
TERM 1- 5 Dip switches for correct termination of COM3 and COM 4 for RS422 and
RS485 serial data
SER 1 - 5 9 way (male) D Type RS-232 (3 wire), RS-422, RS-485 serial port. Not
currently used, available for future expansion
TERM 1 - 10 Dip switches for correct termination of SER 1 - 5 for RS422 and RS485 serial
data. Not currently used, available for future expansion
485 BUS 2x MMJ connector's. Not currently used, available for future expansion
NET RJ45 Ethernet network connector, 10/100BaseT auto-detecting.
Power The power LED will be green to indicate power is connected to the Decoder
HDD Hard Disk Drive – this will flash when the unit is writing to flash
Network The Network LED will light when the unit is connected to the network, the LED
will be off if there is no network connection
IR The Infra Red is not enabled on the unit and is for future development
Unmarked
This LED will glow orange to identify the unit as being a Decoder, this allows
ease of recognistion when the unit is used in a system apoplication which
includes the DV-IP Decoder
Page 8 Dedicated Micros
Remove all the items from the packaging and check you have the items listed below.
DV-IP Decoder
External Power Supply
Power Leads – one US and one Generic (without a plug)
CD ROM
DV-IP Decoder Quick Start Guide - Printed version and also supplied on the CD ROM
DV-IP Decoder Installation Guide - Supplied on the CD ROM
RS232 Cross-over Communication cable
Front and rear rack mounting brackets
If any of these items are missing please contact the Dedicated Micros Technical Support team.
Safety Notes
All the safety and operating instructions should be read before the unit is operated.
Location
Ensure the DV-IP Decoder unit is properly ventilated to protect from overheating.
Ensure there is a 3cm gap on both sides of the unit.
This unit must be stored in a low humidity and dust free area. Avoid places like damp basements or dusty hallways.
Ensure the unit is not located in an area where it is likely to be subject to mechanical shocks.
Electrical Connections
Please ensure the following are available and have been tested prior to the installation:
Mains point
Network point
Network cable
Active video signals, that is, at least one working camera feed
Desk / Laptop PC with CD ROM drive and connection to the same network as the DV-IP Decoder
Power Sources
This unit should be operated only from the type of power source indicated on the manufacturer’s label.
WARNING: Only operate your DV-IP Decoder from the type of power source indicated on the label. Failure
to do so may cause injury or death by electric shock and invalidates the warranty.
Important Note: Before installing the DV-IP Decoder you must carefully read all Safety Instructions and
the following information on where the unit should be located.
Unpacking the DV-IP Decoder
Altri manuali per DV-IP Decoder
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Dedicated Micros Convertitore multimediale
