Dedicated Micros DV-IP Manuale utente
Power Supply
and Video
Encoder
for Dennard Domes
Setup Guide
Dedicated Micros ©2007
2
Analogue to IP Encoder
1.01002
Whilst every attempt is made to ensure these manuals are accurate and current, Dedicated Micros reserve the right to
alter or modify the specication of the machine described herein without prejudice.
Contents
Introduction .......................................................3
Electrical Connections.......................................7
Other Connections ............................................9
Overview of the DV-IP Encoder ........................10
Conguring the Unit ..........................................12
Network.............................................................14
Video .................................................................16
Serial.................................................................18
Audio.................................................................19
User Accounts...................................................20
Connections ......................................................23
Connecting to the Encoder................................24
Controlling a telemetry camera .........................26
Appendix A........................................................27
Appendix B........................................................28
Dedicated Micros ©2007 3
Analogue to IP Encoder
Introduction
1.03
The Dedicated Micros DV-IP range has been designed to offer distributed monitoring and recording
of multiple inputs. Combining advanced hardware technology with numerous sophisticated viewing
applications makes the product range the ideal solution for many applications.
The IP Dome System consists of a regular Dome Camera and a combined power supply unit and
DV-IP Encoder to convert the analogue signal to a digital video stream. The system is designed to
offer a robust and weatherproof interface to the network for a single video source, possibly a remote
camera situated in a position that makes analogue cabling impractical. In addition the system
provides interfaces for audio, alarms and telemetry control.
The encoded video stream can then be routed across the network to any of the NetVu Connected
units for recording (DV-IP Server, Digital Sprite 2, etc.). Viewing and control can be achieved directly
from the unit using either the NetVu ObserVer or the DV-IP Codec in decoder mode.
Incorporating audio into the system allows a live bi-directional audio connection to be made between
the Server and a Client application, as well as recording the audio along with the video on the
allocated DVR or Server.
The DV-IP Encoder supports MultiMode operation allowing compatibility with the other NetVu
Connected products.
MultiMode offers the ability to set different recording and viewing rates, resolutions and compression
across scheduled, normal and alarm modes. By varying the quality (bitrate) of the recorded image,
users can increase recording capability of the unit.
MultiMode recording offers:
Ability to set different recording resolutions including 4CIF (704x576), 2CIF (704x288), CIF
(352x288) and QCIF (176x144).
Ability to set MPEG or JPEG compression recording
Ability to set PPS recording rates
Dynamically switchable resolution when switching from Normal to Event Recording
Dynamically switchable compression between MPEG4/MJPEG from Normal to Event Recording
The DV-IP Encoder allows MultiMode to be congured to ensure the most appropriate video stream
is transmitted across the network for recording. The unit supports on-board pre-alarm storage which
will be sent to the DVR / Server to be stored alongside the alarm recording.
Supporting numerous network protocols (IP, TCP, UDP, DHCP, FTP, TELNET, ICMP, HTTP, ARP)
the DV-IP Encoder is an ideal choice for a true converged network ensuring compatibility with new
and existing network infrastructure and compliments the existing DM NetVu Connected portfolio. All
the safety and operating instructions should be read before the unit is operated.
The System allows analogue cameras to be situated beyond the effective limits of coaxial wiring,
requiring only power and a network connection to provide a fully controllable telemetry camera
position, with alarms and audio.
1.04
Dedicated Micros ©2007
4
Analogue to IP Encoder
Components supplied
Before installing the unit, please remove the components from the packaging and verify that all items
listed below have been supplied:
1 x DV-IP Dome Power Supply
1 x Ferrite (supplied inside the DV-IP Power Supply enclosure)
1 x CD
1 x Setup Guide
Product weight - 3.5Kg
Note: Mounting bracketry may have been ordered and delivered separately.
1.041
This addendum contains the regulatory declarations for the EU for the Dennard/Dedicated Micro
Dennard Analogue to IP Encoder (Power Supply).
CE NOTICE (EUROPEAN UNION).
This product is marked with the CE symbol and indicates compliance with all applicable Directives.
A “Declaration of Conformity” is held at Dedicated Micros LTD, 1200 Daresbury Park, Daresbury,
Cheshire WA4 4HS WWW.dedicatedmicros.com
Hereby, Dedicated Micros LTD, declares that this Analogue to IP Encoder is in compliance with the
essential requirements and other relevant provisions of Directive 95/5/EC.
Marking by the symbol CE indicates compliance of this Dedicated Micros product to the
Electromagnetic Compatibility Directive 89/336/EEC, and the Low Voltage Directive 73/23/EECof the
European Union. Such marking is indicative that this system meets the following technical standards
• EN 61000-6-3 EMC Standard Residential, Commercial and Light Industry.
• EN 62000-3-3 Limitations of voltage changes, uctuations and icker in public low-
voltage supply systems for equipment with rated current up to 16A.
• EN 61000-3-2 Limits for harmonic current emissions for equipment with rated
current up to 16A.
• EN 50130-4 Immunity requirements for components of re, intruder and social
alarm systems.
• EN 60950 Safety of IT and similar equipment.
• EN 55022 Class A. Radiated Emissions Standard, suitable for Commercial or
Residential use
Further details about these applicable standards can be obtained from Dedicated Micros Ltd., 1200
Daresbury Park, Daresbury, Cheshire WA4 4HS
1.042
R&TTE Directive Declaration
Dedicated Microcomputers Group tímto prohlašuje, že tento Power Supply and Video Encoder for
Dennard Domes je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice
1999/5/ES.
Undertegnede Dedicated Microcomputers Group erklærer herved, at følgende udstyr Power Supply
and Video Encoder for Dennard Domes overholder de væsentlige krav og øvrige relevante krav I
direktiv 1999/5/EF.
Hiermit erklärt Dedicated Microcomputers Group, dass sich das Gerät Power Supply and Video
Encoder for Dennard Domes in Übereinstimmung mit den grundlegenden Anforderungen und den
übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG bendet.
Käesolevaga kinnitab Dedicated Microcomputers Group seadme Power Supply and Video Encoder
for Dennard Domes vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele
teistele asjakohastele sätetele.
Dedicated Micros ©2007 5
Analogue to IP Encoder
Hereby, Dedicated Microcomputers Group, declares that this Power Supply and Video Encoder for
Dennard Domes is in compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC.
Por medio de la presente Dedicated Microcomputers Group declara que el Power Supply and
Video Encoder for Dennard Domes cumple con los requisitos esenciales y cualesquiera otras
disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Dedicated Microcomputers Group ΔΗΛΩΝΕΙ ΟΤΙ Power Supply and Video
Encoder for Dennard Domes ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ
ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Par la présente Dedicated Microcomputers Group déclare que l’appareil Power Supply and Video
Encoder for Dennard Domes est conforme aux exigences essentielles et aux autres dispositions
pertinentes de la directive 1999/5/CE.
Con la presente Dedicated Microcomputers Group dichiara che questo Power Supply and Video
Encoder for Dennard Domes è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti
stabilite dalla direttiva 1999/5/CE.
Ar šo Dedicated Microcomputers Group deklarē, ka Power Supply and Video Encoder for Dennard
Domes atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.
Šiuo Dedicated Microcomputers Group deklaruoja, kad šis Power Supply and Video Encoder for
Dennard Domes atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
Hierbij verklaart Dedicated Microcomputers Group dat het toestel Power Supply and Video Encoder
for Dennard Domes in overeenstemming is met de essentiële eisen en de andere relevante
bepalingen van richtlijn 1999/5/EG.
Hawnhekk, Dedicated Microcomputers Group, jiddikjara li dan Power Supply and Video Encoder for
Dennard Domes jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm
d-Dirrettiva 1999/5/EC.
Alulírott, Dedicated Microcomputers Group nyilatkozom, hogy a Power Supply and Video Encoder
for Dennard Domes megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv
egyéb elõírásainak.
Niniejszym Dedicated Microcomputers Group oświadcza, że Power Supply and Video Encoder
for Dennard Domes jest zgodne z zasadniczymi wymaganiami oraz innymi stosownymi
postanowieniami Dyrektywy 1999/5/WE
Dedicated Microcomputers Group declara que este Power Supply and Video Encoder for Dennard
Domes está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE.
Dedicated Microcomputers Group izjavlja, da je ta Power Supply and Video Encoder for Dennard
Domes v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES.
Dedicated Microcomputers Group týmto vyhlasuje, že Power Supply and Video Encoder for
Dennard Domes spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.
Dedicated Microcomputers Group vakuuttaa täten että Power Supply and Video Encoder for
Dennard Domes tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien
direktiivin muiden ehtojen mukainen.
Härmed intygar [företag] att denna Power Supply and Video Encoder for Dennard Domes står I
överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som
framgår av direktiv 1999/5/EG.
Hér með lýsir Dedicated Microcomputers Group yr því að Power Supply and Video Encoder for
Dennard Domes er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC
Dedicated Microcomputers Group erklærer herved at utstyret Power Supply and Video Encoder
for Dennard Domes er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv
1999/5/EF
1.043
Dedicated Micros ©2007
6
Analogue to IP Encoder
RF Interference warning
This is a class A product. In a domestic environment this product may cause radio frequency
interference , in which case the user may be required to take adequate measures.
1.044
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Use only attachments/accessories specied by the manufacturer.
6. Refer all servicing to authorized service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or plug is
damaged
Canadian EMC statement
This product is compliant with Class A ICES-003
Note: This Class A product meets the requirements of the Canadian Interference causing
equipment regulations. Cet appareil numerique de la Classe A, respect toutes les
exigencies du reglement sur le materiel brouilleur du Canada.
1.6
Dedicated Micros ©2007 7
Analogue to IP Encoder
Electrical Connections
1.601
Please ensure the following are available and have been tested prior to the installation:
i) Mains point
ii) Network point
iii) Network cable
iv) Desk / Laptop PC with CD ROM drive and connection to the same network as the
DV-IP Server
1.602
Conguration for 2060 Dome
The DV-IP PSU can connect using co-ax, power pair & RS485 pair, or via an installer supplied co-ax
and power/data wiring. These leads should be connected to the DV-IP PSU.
Connecting a camera using co-ax, power pair & RS485 pair (see key below)
A B
D E F GH J
C K
Dedicated Micros ©2007
8
Analogue to IP Encoder
Conguration for 2040 Dome
Connecting via an installer supplied co-ax and power/data wiring
A B
D E F G
C K
1.62
Connections to Dome
Connections are made via the 6 way power, data and video connector on the edge of the DPICA1
board. These are as follows:
A 24 V AC live
B RS485 ‘A’
C 24 V AC neutral
D RS485 ‘B’
H Coax screen - BNC screen
J Coax signal - BNC centre pin
A BNC connector may be tted to the coax from the dome and connected to the spare BNC socket
on the PCB if required as an alternative to using the screw terminal connector (H & J).
1.63
Mains Connection
Mains power is connected to the transformer within the enclosure using the terminal block next to
the DPICA1 board. Route the mains cable (maximum diameter 8mm) through the gland and tighten
to seal. Secure the cable using the mounted ‘P’ clip. Fit cable ties (supplied) around all conductors
as close as possible to the terminal block.
E Blue --Neutral
F Yellow/Green - Ground
G Brown wire - 240Vac Live (connected to the fused terminal)
Note: Install the earth connector with a loop as shown. This ensures that earth is the last to
disconnect if the cable is subjected to strain.
1.64
Network Connection
The Network connection is made to the back of the DV-IP encoder unit. To ensure CE compliance,
use a screened network cable (K) and t the supplied ferrite as close as possible to the DV-IP
socket, as shown in the diagram above.
1.8
Dedicated Micros ©2007 9
Analogue to IP Encoder
Other Connections
1.81
Audio connection
The DV-IP encoder provides connection for one Audio input and one Audio output, using RCA
plugs. Connect a suitable microphone to the AUDIO IN connection, connect a suitable speaker to
the AUDIO OUT. The diagram shows the audio cable entering via a user installed gland below the
network gland. Do not pass two cables through one gland.
1.83
Serial connection
The serial connection between the encoder and the interface PCB are pre-made via a ribbon cable.
For connector pin-out information, refer to Appendix A.
5.10001
Dedicated Micros ©2007
10
Analogue to IP Encoder
Overview of the DV-IP Encoder
SVHS VID
OUT
IN
NET
POWER
PWR ON
STATUS
The DV-IP Encoder will be installed in the housing when you receive it. The section is for information
only.
SVHS - 75Ω SVHS Y-C composite camera connections, 1V pk-pk
VID IN - 75Ω BNC composite camera connections, 1V pk-pk
VID OUT - 75Ω BNC composite spot monitor connection reserved for displaying on-screenΩ BNC composite spot monitor connection reserved for displaying on-screen BNC composite spot monitor connection reserved for displaying on-screen
summary of encoder’s network settings including IP address
NET - RJ45 10/100BaseT Ethernet connection
POWER - 12V DC Mains powered, separate power supply
LED’s
PWR ON - Green
STATUS - Green
1) Video
The DV-IP Encoder supports a Video In for an analogue video source, this can be via the 75Ω BNC
connector or the S-VHS Y-C connector.
5.101
Note: This will be already connected by a coax to the BNC connector on the DV-IP Dome PSU’s
interface PCB.
5.121
2) Network
The DV-IP Encoder supports a 10/100Mbps auto-detecting network port. Use a properly screened
Ethernet cable to connect the unit to the network.
By default the unit is congured for DHCP where the unit is automatically allocated an IP address
from the network DHCP server.
DHCP works on assigning an IP address at initial connection to the network, however it is possible
for this IP address to change without notication (i.e. if there was a power failure), therefore it is
recommended that the DV-IP Encoder is allocated a xed IP address to remove the possibility of
address change.
When a network is congured for DHCP any networked unit connected to that network will
automatically be assigned an IP address by the DHCP Server.
5.131
Altri manuali per DV-IP
3
Indice
