Deep Blue BlueFox Basic Manuale utente

Installation and

Operating Instructions

Pool Safety System

For the versions:

y BASIC

y STANDARD

y PROFESSIONAL

1 Explanation of Symbols and Safety Notes ............. 5

1.1 Explanation of symbols .......................................................................... 5

1.2 Safety notes ........................................................................................... 5

2 Overview ........................................................................................... 6

2.1 Notes on the installation and operating instructions .............................. 6

2.2 Operating principle "Active mode" ......................................................... 8

2.3 Operating principle "passive mode" ....................................................... 9

2.4 Intended use .......................................................................................... 9

2.5 Package contents ................................................................................... 10

3 Using the System for the First Time ............................... 12

4 Installing the BlueFox System ........................................... 13

4.1 Installing and connecting the alarm box ................................................. 13

4.1.1 Selecting a location for installation ............................................ 13

4.1.2 Installing the alarm box .............................................................. 14

4.1.3 Electrical connections to the alarm box ....................................... 14

4.2 Determining the installation position for the pool sensor ........................ 15

4.3 Fitting the pool sensor ........................................................................... 16

5 Alarm box operation ................................................................. 18

5.1 Operating modes ................................................................................... 18

5.2 Activating the "Active mode" ................................................................ 18

5.3 Activating the "Passive mode" ............................................................... 19

6 System settings ............................................................................ 20

6.1 System tests and system settings ............................................................ 20

6.2 Entering the PIN ..................................................................................... 25

7 Using the System ......................................................................... 26

7.1 Using active mode ................................................................................. 26

7.2 Preparations ........................................................................................... 26

7.3 Alarm (active mode) ............................................................................... 26

7.4 After use ................................................................................................ 27

7.5 Using passive mode ................................................................................ 27

7.5.1 Preparations ............................................................................... 27

7.5.2 Alarm (passive mode) ................................................................. 27

8 Testing active mode ................................................................... 28

9 Testing passive mode ............................................................... 29

10 PRO STD Radio alarm dongle .............................................. 30

10.1 Putting the radio alarm dongle into operation ........................................ 30

10.2 Meaning of the messages ...................................................................... 30

10.3 Pairing the radio alarm dongle with the alarm box ................................. 31

11 Monitoring bracelet ................................................................... 32

11.1 Preparation ............................................................................................ 32

11.2 Charging the monitoring bracelet’s battery ............................................ 33

11.3 Programming the alarm depth and time ................................................. 34

11.4 Calling the status / Clearing the alarm / Resetting ................................... 36

12 BlueFox Control Software ..................................................... 37

12.1 Hardware requirements .......................................................................... 37

12.2 PC operating system requirements ......................................................... 37

12.3 Installing the BlueFox Control software .................................................. 37

12.4 Using the BlueFox control software ........................................................ 40

12.5 Uninstalling the BlueFox control software ............................................... 40

12.6 Updates ................................................................................................. 40

13 Meaning of the monitoring bracelet LED displays

13.1 The monitoring bracelet in use ............................................................... 41

13.2 The monitoring bracelet connected to a PC or charging station .............. 41

14 Maintenance / Service ............................................................. 42

15 Troubleshooting ........................................................................... 42

16 Technical Speciﬁcations ......................................................... 45

16.1 General .................................................................................................. 45

16.2 Operational, transport and storage conditions ........................................ 45

16.3 Power failure ......................................................................................... 47

16.4 Monitoring bracelet battery capacity ...................................................... 47

17 Disclaimer ........................................................................................ 47

18 Warranty ........................................................................................... 48

19 Disposal ............................................................................................. 49

20 Optional Accessories ................................................................ 49

21 Conﬁguration table .................................................................... 50

Patent pending

PCT/EP2009/007105

Germany 10 2008 050 558.7

1 Explanation of Symbols and Safety Notes

1.1 Explanation of symbols

Safety notes

In the text, safety notes are marked with a warning triangle.

Signal words denote the level of danger that would occur if the measures for mini-

mising the risk were not followed.

Caution means that minor material damage could occur.

Warning means that minor personal injury or serious material damage could occur.

Danger means that serious personal injury could occur. In particularly serious cir-

cumstances there is a risk of death.

yA point appears before instructions.

1.2 Safety notes

Safety notes

yBefore tting and commissioning the BlueFox System or before in-

stalling and using the BlueFox Control Software you must have read

and understood these installation and operating instructions.

yFollowing the instructions contained in these installation and operat-

ing instructions will not completely protect you or third parties from

danger.

yObserve local regulations pertaining to "electrical installations in

damp environments".

yNo modications may be made to the BlueFox System.

yThe alarm box, pool sensor and all other BlueFox components may

not be opened.

Safety notes

yObserve the safety notes contained in these installation and operat-

ing instructions.

yRisk of drowning! Initiate rescue immediately alarm sounds.

yThe BlueFox system does not provide complete protection from

drowning. Monitoring the swimming pool remains your personal

responsibility. See Disclaimer, P. 47.

yThe BlueFox system may only be used for the intended purpose and

in the intended eld of application. See Intended use, P. 9.

yOnly use the plug-in mains adapter supplied and original BlueFox

accessories.

yA short tone sequence will sound if there is a power failure. The

BlueFox system will then no longer provide support for monitoring

the swimming pool. Have the plug-in mains adapter checked by a

specialist.

2 Overview

2.1 Notes on the installation and operating instructions

These installation and operating instructions describe the installation and use of the

BlueFox system, the installation and use of the BlueFox Control software and the

conguration of the monitoring bracelet.

You will nd “step-by-step” instructions in the section Using the System for the First

Time, P. 12.

yYou can download these installation and operating instructions from

www.bluefox-poolsafety.com as a PDF le. The hyperlinks, bookmarks and

search function of the PDF version allow you to quickly nd topics.

The BlueFox system is under continuous development. Pictorial and graphical exam-

ples in these installation and operating instructions may deviate from the equipment

supplied.

BlueFox can be supplied in the following versions: BASIC, STANDARD and PROFES-

SIONAL. Information that only applies to the STANDARD and/or PROFESSIONAL

version(s) is marked accordingly.

BlueFox version Symbol Meaning

BASIC BAS Information marked BAS applies only to

the BASIC version.

STANDARD STD Information marked STD applies only to

the STANDARD version.

PROFESSIONAL PRO Information marked PRO applies only to

the PROFESSIONAL version.

2.2 Operating principle "Active mode"

Pool monitoring during bathing hours

For pool monitoring during bathing hours the active mode must be

activated. (For how to activate, see page 18).

For each swimming pool user, a monitoring bracelet is pre-programmed with a

personal alarm depth and alarm time – according to the user’s swimming ability.

Programming is carried out using the PC program BlueFox Control (see Program-

ming the alarm depth and time, P. 34).

When the user enters the water the monitoring bracelet automatically switches on

(water contacts).

Course of events when an alarm sounds

At depths greater than the alarm depth and when the programmed alarm time

expires, the monitoring bracelet activates the Alarm 2. The pool sensor receives

the alarm signal and routes it to the alarm box. The following alarms are triggered:

Warning lights and sirens, STD PRO radio alarm.

Warning!

Risk of drowning! Initiate rescue immediately alarm sounds.

Swimming pool

Alarm depth

Depth proﬁle

Monitoring bracelet

Time

Depth

Programmed

alarm time

Warning lights

Siren

The siren is deactivated by

pressing any button on the

alarm box

The siren can be deactivated by pressing any button on the alarm box 3. The

following alarms remain active until the monitoring bracelet is taken out of the

water 4: Warning lights, STD PRO radio alarm.

If no button is pressed, all alarms will be cancelled 10 seconds after the monitoring

bracelet is taken out of the water.

All alarms are cancelled 6 minutes at the latest after the alarm was activated.

2.3 Operating principle "passive mode"

Pool monitoring outside normal bathing hours

For monitoring the pool outside normal bathing hours the “passive mode”

must be activated. (For how to activate, see page 19).

If the pool sensor registers activity in the pool (e.g. a person or object falling into

the water) the following alarms are triggered. Warning lights and sirens, STD

PRO radio alarm see page 30.

The passive mode LED next to the padlock symbol ashes.

Warning!

Risk of drowning! Initiate rescue immediately alarm sounds.

Warning!

Risk of drowning because the BlueFox system is not monitoring the pool.

If an alarm sounds and/or the passive mode LED is ashing BlueFox is not

monitoring the pool. The pool must be monitored by a person.

The alarm can be deactivated by pressing any button on the alarm box.

If no button is pressed, the alarm will be cancelled 6 minutes after the alarm was

activated.

As soon as the waves have subsided (after approx. 12 minutes), the passive mode

LED will illuminate permanently. Passive mode monitoring is activated once again.

2.4 Intended use

The BlueFox system has been designed for use in private and public swimming pools

(indoor and outdoor swimming pools). The alarm box enclosure is resistant to light

water splashes (IP65). For outdoor installations the alarm box must be covered and

protected from direct sunlight.

2.5 Package contents

Alarm box with siren

1 Warning lights

2 12 V Connection

3 Pool sensor connection

4 Spare connection for 2

pool sensors PRO

Plug-in mains adapter

Pool sensor

PRO 2 Pool sensor

9 1 Pool sensor with cable

 Mounting ring

 3 Screws

3 m/10 ft

10 m/33 ft

2 3

9



PRO STD

1 Radio alarm dongle

Installation com-

ponents

1 Bracket

2 Screws

2 Plugs

Fig. 1 Alarm box pool sensor

Adhesive (solvent-free)

Allan wrench 3 mm

Fig. 2 Adhesive and tool

Altri manuali per BlueFox Basic

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Elettronica per il fitness popolari di altre marche

Tunturi

Tunturi Platinum Pro Manuale utente

ergoline

ergoline ergoselect 150 Manuale utente

Kettler

Kettler SM3635-68 Manuale utente

BH FITNESS

BH FITNESS G6424i Manuale utente

BodyMedia

BodyMedia DD100 Manuale utente

Octane Fitness

Octane Fitness ZERO RUNNER ZR7000 Manuale

New Balance

New Balance EX2 900 Manuale utente

Energetics

Energetics PR 3000p Manuale utente

Sportline

Sportline Solo 910 Manuale utente

Suunto

Suunto T6D Manuale utente

Tacx

Tacx Bushido T1980 Manuale utente

BingoFit

BingoFit 907HR Manuale utente

Omron

Omron HJ-303 Manuale utente

OXYLANE

OXYLANE ONmove 200 GPS Manuale utente

BH FITNESS

BH FITNESS G2376D Manuale utente

pivotal

pivotal tracker 1 Manuale utente

Oregon Scientific

Oregon Scientific ECG Monitor SE332 Manuale utente

Wintec

Wintec Easy Band Manuale utente