Defender Security DFR40 Manuale utente

DFR40 and DFR41

DOME SECURITY CAMERAS

INSTALLATION GUIDE

INSTALLATION

FEATURES

SAFETY INSTRUCTIONS

Before using the camera, please read this manual carefully and keep it

for future use.

• Installation should be completed by a qualied installer or experienced

person with good knowledge of network installation.

• Do not expose the lens to intense light source for long periods.

• Do not touch the sensor directly.

• Ensure the power supply used to operate the camera is of the correct

specication.

• Operating temperature range is -10oC to +50oC.

• Do not mount the camera directly above a heat source.

• Do not install the camera below an air curtain or air conditioning unit or

the lens may be affected by condensation.

• There are no serviceable parts inside - do not disassemble.

• It is advisable to install lightning protection if the camera or any wiring is

to be installed in a vulnerable position.

Auto Gain Control (AGC)

• Built-in auto gain control (AGC) circuit. The colour camera can produce

high quality pictures in low light condition.

Auto Electronic Shutter (AES)

• Built-in auto electronic shutter function. The colour camera’s AES speed

is up to 1/100,000s.

Control Button

TROUBLESHOOTING

No picture after connecting to the recorder and power supply.

• Check the power supply is suitable and connected correctly and that the

network cable is correct and installed properly.

The picture has owing interference ripples or generally poor.

• May be caused by uctuations in the AC mains power supply.

Check the monitor and peripheral equipment used to determine if the

problem is with the camera feed or another component in the network.

• Ensure the power supply is stable and of sufcient power and all

connections are clean with low impedance.

The picture colour changes continuously

• Installation close to uorescent lighting can cause this. Try to keep a

reasonable distance from the uorescent tting.

• Interference from an electromagnetic source close to the camera or the

supply wiring.

Gamma Characteristic

• Camera Gamma characteristic is 0.45.

Scanning Mode

• NTSC or PAL mode.

FEATURES

• The camera connection cable has a menu control button under a small

round plastic cover on the splitter.

• When the camera is operating, pressing the button will display an on

screen menu for setting further options:-

1. AE - brightness and exposure

2. AWB - white balance adjustment

3. Day/Night - gain control

4. Image Enhance - adjusts contrast, saturation and sharpness

5. Video Setting - HD/SD

6. Language - set your language preference for the menu

7. Function - set privacy and motion detection zones

8. Version - displays the rmware version of the camera

9. Reset - reset to defaults

10. Save and Exit - saves all amended settings and exits the menu

11. Exit - quits without saving

• The button acts like a joystick so you can switch between options or make

changes to the settings.

• The options available may differ slightly depending on the camera model.

INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL &

ELECTRONIC EQUIPMENT.

When this product has reached the end of its life it must be treated as Waste Electrical

& Electronic Equipment (WEEE). Any WEEE marked products must not be mixed with

general household waste, but kept separate for the treatment, recovery and recycling

of the materials used. Contact your local authority for details of recycling schemes in

your area. Made in China. PR2 9PP

Man Rev 1.0

SPECIFICATION

Image Sensor 1/2.5” 5MP CMOS Sensor

Resolution 5M: 2592x1944

Output PAL/NTSC

Minimum light level 0.01lux/F1.2

S/N ratio >45dB

Synchronisation Internal

IR Range 20 meters

IR power AGC auto control

Video output CVBS / CVI / TVI / AHD

Power 12V DC 550mA (Min)

Lens 3.6mm Fixed Lens

IP Rating IP67

Dimensions Ø93 x 74mm

Weight 0.4kg

Operating Temp -10oC~+50oC 95% humidity (Max)

MAINTENANCE

• Use a soft cloth to wipe off any dust. If the camera is very dirty, use a

damp cloth with a mild detergent and wipe dry.

• Do not use any chemicals, abrasives or solvents that could damage the

camera.

• Clean the lens and sensor with a soft dry cloth.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Defender Security Telecamera di sicurezza

Defender Security

Defender Security LIZM40SM Manuale utente

Defender Security

Defender Security LIP40SHD Manuale utente

Defender Security

Defender Security 82-12165 Manuale utente

Defender Security

Defender Security DFR42 Manuale utente

Defender Security

Defender Security SR10369 Manuale utente

Defender Security

Defender Security LIRDCVH Manuale utente

Defender Security

Defender Security 82-18295 Manuale utente

Defender Security

Defender Security LBB40SM Manuale utente

Defender Security

Defender Security 82-22590 Manuale utente

Defender Security

Defender Security LICG24SM Manuale utente

Defender Security

Defender Security DFR32 Manuale utente

Defender Security

Defender Security 82-15105 Manuale utente

Defender Security

Defender Security DFR36 DFR37 Manuale utente

Defender Security

Defender Security LICE24NSHD Manuale utente

Defender Security

Defender Security LIG40SM Manuale utente

Defender Security

Defender Security 82-13285 Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente