Page 5
Caution:
If the swivel filter holder Cis not closed or
the glass jug Gis not properly seated, the
drip - stop function will not function properly.
It could cause hot water or hot coffee to
overflow.
9Connect the plug to the wall socket.
10 Turn the appliance on, by setting the On/
Off switch I to the “ON” position.
Operation
Preparation
Caution:
First time use: Run the appliance at least 4
times without adding coffee.
Please follow the steps 1 - 2 and 8 - 13 in
the “Brewing Coffee” section.
1Remove all packaging and stickers and
dispose of them according to applicable
legal regulations.
2
2Before using the appliance for first time,
clean all parts which come into contact with
water carefully. Please see full details in the
“Cleaning and Care” section.
3 Make sure that the appliance is placed in
an upright position and on a stable, flat,
clean, dry, and non-slip surface.
Brewing Coffee
1Open the water tank cover Aand use the
glass jug Gto fill the water tank Ewith the
required amount of water, but do not fill past
the “max” mark. The brewed amount of
coffee will be 10 % less than the filled water,
because it is absorbed by the coffee grounds
and the filter. The scale on the glass jug is
marked in coffee cups, e.g. 4 = 4 cups. For
best results it is suggested to operate the
appliance with at least a 4 cups coffee
serving.
Note
Use only clean, cold, and fresh drinking
water.
2 Close the water tank cover A.
3Press the release button Bfor the swivel
filter holder.
4 Open the swivel filter holder Cby swinging
it out to the left.
5Take a suitable paper filter (1 x 4) and
insert the paper filter into the swivel filter C.
Note
Use only one paper filter at a time. Make
sure that the paper filter does not bend or
fold.
6Fill the filter with the desired amount of
ground coffee. To do this, you may use the
supplied measuring spoon J.
7Close the swivel filter holder Cuntil it
clicks, which insures that it is closed
properly.
8Place the glass jug Gon the warming plate
H.
– The On/Off switch Iilluminates and the
brewing process begins.
Notes
The brewing process can be stopped at any
time by setting the On/Off switch Ito the
“OFF” position.
The appliance is equipped with a drip-stop F
located underneath the swivel filter holder C
and enables you to briefly remove the glass
jug Gto pour coffee before the water has
finished running through the machine.
Caution
Ensure that you place glass jug Gon the
warming plate Hquickly (max. 30 second
delay). Otherwise the brewed coffee from the
filter could overflow. If you want to use the
glass jug for more than 30 seconds, switch
off the appliance.
Never open the swivel filter holder Cduring
the brewing process, even if no water is
draining from the filter. Extremely hot water
or coffee can spill out from the swivel filter
holder and cause injury. If water or coffee is
not draining from the swivel filter holder,
immediately unplug the appliance and wait
10 minutes before opening and checking the
swivel filter holder.
When the brewing process ends and the
water level indicator with MAX marking Dis
empty, there will still be hot liquid in the
swivel filter holder C. Wait a few minutes for
the rest of the liquid to drip into glass jug G.
11 Remove the glass jug Gfrom the
warming plate H, as soon as the brewing
process has finished and the glass jug Gis
filled. The coffee is ready for use.
12 To turn the appliance off, set the On/Off
switch Ito the “OFF” position.
– On/Off switch I turns appliance on and off.
13 Disconnect the appliance from the wall
socket.
