DEGREE CONTROLS Rooster Sensor200 Manuale utente

Rooster™ Sensor200 USER MANUAL

Rooster™ Sensor200 USER MANUAL 62360MN000-A001 of 40

User Manual

High Performance Air Velocity and Temperature Sensor

with Full-Color Touch Screen Display

BACnet® MS/TP Capable

Version 1.06

Complete Kit includes:

oSensor Display Panel

oSensor Probe and Mounting Clamp

oPower Supply

This is proprietary information of Degree Controls Inc., contents are protected under US copyright laws ©Degree Controls, Inc. 2022.

Rooster™ Sensor200 USER MANUAL 
 
 
Rooster™ Sensor200 USER MANUAL 62360MN000-A002 of 40 
Contents 
Product Overview..............................................................................................................................................................................................................................3 
Hard Button Overview................................................................................................................................................................................................................4 
Soft Buttons and Home Screen Layout ..................................................................................................................................................................................4 
Feature Overview.........................................................................................................................................................................................................................4 
Rear Panel Layout for Advanced Connections ....................................................................................................................................................................7 
Technical Specifications ..................................................................................................................................................................................................................8 
Connection and Wiring Information...........................................................................................................................................................................................9 
Sash Input ......................................................................................................................................................................................................................................9 
Night Setback Input.................................................................................................................................................................................................................. 10 
Auxiliary Input ........................................................................................................................................................................................................................... 11 
Outputs ........................................................................................................................................................................................................................................ 11 
Mechanical Information............................................................................................................................................................................................................... 13 
Alarm Module ............................................................................................................................................................................................................................ 13 
Installation........................................................................................................................................................................................................................................ 13 
Back Plate Mounting Options - Alarm Module ................................................................................................................................................................ 13 
Installation Procedure.............................................................................................................................................................................................................. 14 
Probe Sensor............................................................................................................................................................................................................................... 15 
Boot Up Procedure........................................................................................................................................................................................................................ 16 
Access Tier Privileges: USER, EH&S & CERTIFIER................................................................................................................................................................ 17 
Set/Change Passwords................................................................................................................................................................................................................. 18 
Calibration –Sash Height............................................................................................................................................................................................................ 18 
Sash Readings............................................................................................................................................................................................................................ 18 
Alarm Threshold Configuration................................................................................................................................................................................................. 19 
Alarm Troubleshooting............................................................................................................................................................................................................ 19 
Alarm Controls ................................................................................................................................................................................................................................ 20 
Night SetBack............................................................................................................................................................................................................................. 20 
Alarm Ringback......................................................................................................................................................................................................................... 20 
Alarm Delay................................................................................................................................................................................................................................ 21 
Startup Delay ............................................................................................................................................................................................................................. 21 
Splash Screen ............................................................................................................................................................................................................................. 22 
Latch Alarm ................................................................................................................................................................................................................................ 22 
Alarm Tone Settings................................................................................................................................................................................................................. 22 
Backlight Dimming ........................................................................................................................................................................................................................ 23 
Airflow Settings............................................................................................................................................................................................................................... 23 
Airflow Sensitivity...................................................................................................................................................................................................................... 23 
Airflow Resolution..................................................................................................................................................................................................................... 23 
Volumetric Flow Settings ........................................................................................................................................................................................................ 24 
Air Changes Per Hour.............................................................................................................................................................................................................. 25 
BACnet® MS/TP............................................................................................................................................................................................................................. 25 
BACnet® Protocol Network Settings................................................................................................................................................................................... 25 
BACnet® MS/TP Objects ........................................................................................................................................................................................................ 26 
I/O Configuration........................................................................................................................................................................................................................... 34 
Relay Outputs ............................................................................................................................................................................................................................ 34 
Accessory Buttons ..................................................................................................................................................................................................................... 34 
Links to Relay Outputs............................................................................................................................................................................................................. 34 
I/O Polarity................................................................................................................................................................................................................................. 35 
Import/Export.................................................................................................................................................................................................................................. 35 
EEPROM....................................................................................................................................................................................................................................... 35 
Event Log..................................................................................................................................................................................................................................... 35 
USB Field Upgrade Procedure.................................................................................................................................................................................................... 36 
Soft Reboot from Info Screen................................................................................................................................................................................................. 37 
Power Cycle Procedure............................................................................................................................................................................................................ 37 
Factory Reset Procedure.............................................................................................................................................................................................................. 37 
GUI Map............................................................................................................................................................................................................................................ 39 
Warranty............................................................................................................................................................................................................................................ 40 
 
 

Rooster™ Sensor200 USER MANUAL

Rooster™ Sensor200 USER MANUAL 62360MN000-A003 of 40

Product Overview

Congratulations on your purchase of the RoosterTM Sensor200, the first the BACnet® MS/TP

capable air velocity and temperature sensor with color touch panel display for facility managers

to achieve local and remote communications simultaneously.

The Rooster™Sensor200 is delivered calibrated and ready to deploy with a probe-style sensor

to monitor ducted airflow. Sensor200 comes with NIST certification, and the instrumentation-

class sensor provides best accuracy across a wide velocity range, 0.15 –20.0 m/s (30 –4000

fpm). Rooster™ provides real-time audible and visual notification at the display module, and

concurrent communication to a building controller over RS485 with the BACnet® MS/TP

communication protocol. Physical and digital configuration programming also work together, as

users may configure Sensor200 using its own touch screen display, or remotely, through

BACnet®.

The Rooster™ Sensor200 is feature-rich, delivering maximum flexibility and control to duct

airflow monitoring applications. Alarm output behavior is fully configurable, and dual password

protection allows users to personalize operational experience, but not override safety features

set by facility managers. Volumetric flow is easily enabled by entering duct information, and

ACH (air changes per hour) functionality is available to measure the air volume added to, or

removed from, spaces within buildings. Sensor200’s built-in USB port allows for in-the-field

firmware updates to future-proof investments in airflow monitoring. Advanced controls include

I/O to drive fans, lighting, or a hard-wired alarm separate from the distributed control system

(DCS). In addition, Sensor200’s PI output may be applied for setpoint control.

This manual will guide you through installation, alarm control settings, firmware upgrades, and

the full range of features for the BACnet®-capable RoosterTM Sensor200.

Rooster™ Sensor200 USER MANUAL

Rooster™ Sensor200 USER MANUAL 62360MN000-A004 of 40

Hard Button Overview

MUTE

Mutes the audible alarm, any time it is sounding. When the alarm has

been muted, a mute icon [ ] will appear in the top center portion

of the home screen. Just like a snooze button, the audible alarm will

re-sound, when the configurable time-out is reached, and if ringback

has been enabled.

HOME

Returns the user to the home screen when pushed from any menu or

info screen. *Cannot be used to abort the calibration procedure and

some critical system functions.*

LED

A red LED will flash while an airflow alarm is active. The red LED will

also flash if Sash and Night Setback alarms are active. In all other

cases, this LED will remain off.

Soft Buttons and Home Screen Layout

Feature Overview

CUSTOM ASSET TAG

Users logged in as EH&S can change default “Asset Tag” to a custom tag. This is useful

for naming the sensor in a larger distributed system, or to denote a company asset

number. A 12-digit numeric asset tag can be set with the provided on-screen keypad, OR

plug in a USB interface keyboard to enter a 12-character alphanumeric tag. Users can

enable or disable display of the Asset Tag.

Home>Settings>System>Advanced>Configure Asset Tag

Startup Delay Indicator, Night

Setback/Mute Indicator

Asset Tag

Face Velocity

(touch to toggle units)

Air Temperature

(touch to toggle units)

Time of Day

Alert Banner

Status Color

(Green, Yellow or Red)

Settings

Quick access to current

configuration settings including

alarm thresholds, calibration

date, and firmware version

USB input for keyboard

and firmware upgrades

Rooster™ Sensor200 USER MANUAL

Rooster™ Sensor200 USER MANUAL 62360MN000-A005 of 40

CLOCK

Users logged in as EH&S or Certifier can set time, date, and change clock to display in 12

or 24-hour format.

Home>Settings>System>Date & Time>Date & Time Settings

KEYPAD AND BUTTON SOUNDS

Users may toggle keypad and button beep sounds on and off.

Home>Settings>System>Alarms/Sound>Key Beep

DEVICE VOLUME

Users can toggle through low, medium, or high alarm volumes. If logged in as EH&S or

Certifier, a global minimum volume threshold can be set. This restricts a standard user

from setting an alarm volume too low for particular facility safety requirements.

Home>Settings>System>Alarms/Sound>Device Volume

ON-SCREEN ALERT BANNERS

A yellow banner will appear beneath on-screen velocity readings to alert users regarding

various scenarios such as low airflow or power failure.

Home

TOGGLE VELOCITY UNIT TYPE

Instantly toggle displayed velocity units from m/s to fpm, or vice versa, by pressing on the

displayed velocity reading on the home screen. A third touch toggle of CFM is accessible

if volumetric flow is enabled, or ACH if air changes per hour is enabled.

>Home

TOGGLE TEMPERATURE TYPE

Instantly toggle displayed temperature units from Fahrenheit to Celsius, or vice versa, by

pressing on the displayed temperature reading on the home screen.

>Home

PASSWORD-PROTECTED ACCESS TIERS: CERTIFIER & EH&S

Password protected access tiers enable advanced configuration options and features.

Home> Settings>System>Advanced>Change Passwords

Rooster™ Sensor200 USER MANUAL

Rooster™ Sensor200 USER MANUAL 62360MN000-A006 of 40

USB INTERFACE FOR UPGRADES AND DATA IMPORT/EXPORT

Firmware upgrades can be installed on-site via USB flash drive. See the USB Field Upgrade

section for more information. Users may also import/export Rooster™ settings and export

the event log through the USB interface.

CUSTOMIZABLE BOOT SCREEN

Our engineers can configure your unit with a custom image or logo file (240x320) in

portable network graphic (.png) format to display on boot up. Contact our sales team to

get started: sales@degreec.com

NIGHT SETBACK

EH&S or Certifier users can configure 3 convenient modes (Audible, Muted, or Off) of

operation. The RoosterTM Sensor200 is a normally open device. To trigger audible or

muted night setback, the dry contact relay must be closed. See the Alarm Threshold

Configuration section for instructions on how to setup night setback alarm thresholds.

Home>Settings>System>Alarms/Sound>Alarm Controls>Night Setback

ALARM LATCHING

EH&S or Certifier users can setup latched alarms to indicate that a low airflow state has

occurred in the “Alarm Controls” menu. User must then enter a EH&S or Certifier

passcode to unlatch an alarm.

Home> Settings>System>Alarms/Sound>Alarm Controls>Latch Alarm

ALARM RINGBACK

EH&S or Certifier users can configure the amount of snooze time before an alarm rings

again after being muted in the “Alarm Controls” menu. Optionally, the audible alarm can

be turned off completely.

Home>Settings>System>Alarms/Sound>Alarm Controls>Ringback

BACKLIGHT DIMMING

Users can toggle the brightness setting, as well as the brightness of the screen when set

to “dim”. A “time before dim” option is available that sets the screen to dim after a

predetermined amount of time has expired.

Home>Settings>System>Brightness

Rooster™ Sensor200 USER MANUAL

Rooster™ Sensor200 USER MANUAL 62360MN000-A007 of 40

AIRFLOW RESOLUTION

EH&S or Certifier users can select the resolution of air velocity units.

Home>Settings>System>Airflow Settings>Airflow Resolution

Rear Panel Layout for Advanced Connections

Figure 1 Connections

Connection

Description

Connector Type

Mating Connector

Power Entry

2-Pin, polarized, Phoenix

Contact

Included and attached to AC/DC power supply

Sensor Connection

RJ-11

Included as part of sensor assembly

BACnet® Connection

3-pin, push-in spring

connection

Not included

3-position orderable Part Number: Phoenix Contact 1778845

Output Connection

8-pin, polarized, Phoenix

Contact

*2-position connectors will fit

Not included

8-position orderable Part Number: Phoenix Contact 1803633

2-position orderable Part Number: Phoenix Contact 1803578

Input Connection

10-pin, polarized, Phoenix

Contact

*2-position connectors will fit

Not included

10-position orderable Part Number: Phoenix Contact 1803659

2-position orderable Part Number: Phoenix Contact 1803578

Table 1 Connections - Rear Panel of Display Module

Rooster™ Sensor200 USER MANUAL

Rooster™ Sensor200 USER MANUAL 62360MN000-A008 of 40

Optional Sash Switch Kit, Degree Controls Part#: 62310AS004 includes 10-postion Phoenix

Contact connector. This is for digital sash sensor mode.

Optional Sash Position Sensor Kit, Degree Controls Part#: 62310AS008 includes 10-postion

Phoenix Contact connector. This is for analog sash sensor mode.

Technical Specifications

Alarm Module Size

82mm x 135mm x 19mm (3.2” x 5.3” x 0.7”)

(without back plate)

LCD Display Area

57mm x 70mm (2.3” x 2.7”)

Airflow Velocity Range

0.15- 20.0 m/s (30-4,000 fpm)

Response Time

< 1 second

Supply Voltage

24VAC/VDC

Sash Switch Input

Pin 1 = +15V Power (For Proximity SW)

Pin 2 = SASH (Contact or Proximity)

Pin 3 = GND (Contact or Proximity)

Night-Set Back Input

Dry Contact Closure

Pins 5-6

Auxiliary Input

(BACnet®Monitored)

Dry Contact Closure

Pins 7-8

Analog Input

0 –10V Analog

Pin 9 = A IN

Pin 10 = GND

Relay Outputs

Qty. (3), 1A, 24VAC/DC

Pins 1-2 Relay1

Pins 3-4 Relay2

Pins 5-6 Relay3

Analog Output

0 –10V Analog

Pin 7 = A OUT

Pin 8 = GND

Power Adapter

90-250V

Red LED indicator

160° viewing angle

Alarm Volume

0 - 85dB (adjustable)

Relative Humidity

(non-condensing) 5 - 95%

Operating temperature

5°C - 60°C (40°F - 140°F)

Storage temperature

-40°C - 85°C (-40°F - 185°F)

Weight

<170g (<6oz)

Compliance Standards

CE, RoHS

Rooster™ Sensor200 USER MANUAL

Rooster™ Sensor200 USER MANUAL 62360MN000-A009 of 40

Connection and Wiring Information

Degree Controls recommends 18-24 AWG wire for all wiring connections to the input and

output connectors. The sensor and power entry connections have been prepared for you, and

merely need to be pulled through the openings and connected to the display module. If the

Sash Switch option (digital sash operation) is purchased, this is pre-connectorized for you as

well.

The RoosterTM Sensor200 has additional input and output capabilities for night setback and

application specific controls. These cable harnesses should be prepared by the client, using the

orderable mating connectors listed above.

Sash Input

The RoosterTM Sensor200 provides you with the ability to select one of two sash input settings:

1. Digital sash sensor or

2. Analog sash sensor

The default value is Digital, and users can toggle between a digital or analog sash sensor input

by navigating to:

Home>Settings>Sash Settings

Digital Sash

The default I/O polarity of the digital sash position input is normally open. The design intent is

as follows:

The sash setting is set to Digital.

When the sash is in a safe position, the proximity sensor should not detect a metallic

object/strip.

Sash position input logic may be reversed using the I/O configuration menu on the Sensor200

to achieve a different result, and any proximity sensor may be implemented.

Degree Controls can provide you with an optional Sash Switch comprised of (1) inductive

proximity sensor and (1) 10-position connector which mates to the input connection of the

display module. This inductive proximity sensor switches state when it contacts metal surfaces.

This sash sensor is a normally open device, meaning it closes upon sensing metallic objects.

The DegreeC Sash Switch (Part# 62310AS004), comes with three stripped and tinned wire leads:

Brown = +15V

Black = Sash

Blue = GND

Wire these in their respective positions 1, 2, and 3 on the input connection block.

Rooster™ Sensor200 USER MANUAL

Rooster™ Sensor200 USER MANUAL 62360MN000-A0010 of 40

Analog Sash

With the sash input configured as Analog, the Sensor200 monitors the sash position as detected

from the 0-10V analog signal on the analog input.

The design intent is as follows:

The sash setting is set to Analog.

The Sensor200 monitors sash position as detected from a 0-10V analog signal on the analog

input.

The sash height calibration routine records the sash sensor's resistance in the Open, Normal

and Closed positions.

If the sash reading is within 1% of full scale of the recorded closed position, the sash is

considered to be in the closed position.

If the sash reading is 1% of full scale greater than the normal position, the sash is considered

to be in the open position.

If sash readings are between the closed and open positions, the sash is considered to be in the

normal position.

The Sensor200 will alarm for unsafe sash position whenever the sash is in the open position.

The DegreeC Sash Position Sensor Kit (Part# 62310AS008) uses pin 1 for 15V and analog input

pins 9 and 10 on the input connector marked as Analog In:

Pin 1 = +15V

Pin 9 = A IN

Pin 10 = GND

See the sash height calibration section for additional calibration detail. See the I/O configuration

section to configure a relay output for Sash Alarm.

Note: For implementation support, or for users preferring to use a micro-switch for sash alarm

activation, please contact Degree Controls.

Night Setback Input

The RoosterTM Sensor200 allows the user to connect to a digital input, dry contact, on positions

5 & 6 of the Input connector, for night setback. The purpose of the Night Setback input is to

provide the user with the ability to send a remote signal to all RoosterTM Sensor200s

simultaneously, to change their behavior during low flow conditions. This signal is normally

initiated by a Laboratory or Building Management System (BMS).

Once the wiring connections are made, the user can assert, and also remove, the night setback

signal via the BMS. Three Sensor200 night setback states can be selected.

Audible: In this state, when the night setback signal is asserted, the Sensor200 will still

audibly alarm when airflow drops below the NSB trip threshold. Note: NSB threshold is

independently set.

Indice

Manuali Regolatori di temperatura popolari di altre marche

Swegon

Swegon LUNAd MB Manuale utente

Lucky Reptile

Lucky Reptile Thermo Control II Manuale utente

SENSORMETRIX

SENSORMETRIX Argon 100 Manuale utente

Fuji Electric

Fuji Electric PXE4 Manuale utente

Yuyao gongyi

Yuyao gongyi XMT-808 series Manuale utente

Selec

Selec TC544C Manuale utente

P.W. KEY

P.W. KEY rt-208gt Manuale utente

Future Design

Future Design FDC-9200 Manuale utente

BH Thermal

BH Thermal BriskONE Manuale utente

Omron

Omron E5EX-H Manuale utente

West Control Solutions

West Control Solutions KS 45 Guida rapida

MCS

MCS RITC-15B Manuale utente

SMC Networks

SMC Networks Thermo-con INR-244-639 Manuale utente

eltherm

eltherm Ex-TC It Series Manuale utente

Omron

Omron C200H-TV Series Manuale utente

industrie technik

industrie technik CA1 Manuale utente

KRAL

KRAL EET 32 Manuale utente

dixell

dixell XR420C Schema elettrico