Deif AGC 200 Manuale utente

AGC 200 Advanced Gen-set Controller

OPERATOR’S MANUAL

Display readings

Push-button functions

Alarm handling

Log list

Document no.: 4189340607B

SW version 3.5X.X or later

AGC 200 Operator’s Manual

DEIF A/S Page 2 of 22

Table of contents

1. ABOUT THIS DOCUMENT....................................................................................................3

GENERAL PURPOSE......................................................................................................................3

INTENDED USERS..........................................................................................................................3

CONTENTS/OVERALL STRUCTURE..................................................................................................3

2. WARNINGS AND LEGAL INFORMATION ...........................................................................4

LEGAL INFORMATION AND RESPONSIBILITY.....................................................................................4

ELECTROSTATIC DISCHARGE AWARENESS.....................................................................................4

SAFETY ISSUES............................................................................................................................4

DEFINITIONS ................................................................................................................................4

UL APPLICATIONS.........................................................................................................................4

3. AGC 200 VARIANTS..............................................................................................................5

ISLAND,AGC 212/222/232/242...................................................................................................5

AUTOMATIC MAINS FAILURE,AGC 213/233...................................................................................5

MAINS,AGC 245.........................................................................................................................6

MAINS AND TIE BREAKER,AGC 246..............................................................................................6

BUS TIE BREAKER,AGC 244.........................................................................................................7

4. DISPLAY PUSH-BUTTONS AND LEDS ...............................................................................8

PUSH-BUTTON FUNCTIONS............................................................................................................8

LED FUNCTIONS.........................................................................................................................11

5. DISPLAY AND MENU STRUCTURE...................................................................................13

LCD DISPLAY.............................................................................................................................13

MENU STRUCTURE......................................................................................................................13

STATUS LINE TEXT......................................................................................................................15

RUNNING MODES........................................................................................................................20

6. ALARM HANDLING AND LOG LIST...................................................................................21

ALARM HANDLING .......................................................................................................................21

LOG LIST....................................................................................................................................22

AGC 200 Operator’s Manual

DEIF A/S Page 3 of 22

1. About this document

General purpose

This document is the Operator’s Manual for DEIF’s Advanced Gen-set Controllers, the AGC 200

series. The document mainly includes general product information, display readings, push-

button and LED functions, alarm handling descriptions and presentation of the log list.

The general purpose is to give the operator important information to be used in the daily

operation of the unit.

Intended users

This Operator’s Manual is mainly intended for the daily user. On the basis of this document, the

operator will be able to carry out simple procedures such as start/stop and control of the

generator set.

Contents/overall structure

The document is divided into chapters, and in order to make the structure simple and easy to

use, each chapter will begin from the top of a new page.

Please make sure to read this handbook before working with the Multi-line 2

controller and the gen-set to be controlled. Failure to do this could result in

damage to the equipment or human injury.

AGC 200 Operator’s Manual

DEIF A/S Page 4 of 22

2. Warnings and legal information

Legal information and responsibility

DEIF takes no responsibility for installation or operation of the generator set. If there is any doubt

about how to install or operate the generator set controlled by the unit, the company responsible

for the installation or the operation of the set must be contacted.

Electrostatic discharge awareness

Sufficient care must be taken to protect the terminals against static discharges during the

installation. Once the unit is installed and connected, these precautions are no longer necessary.

Safety issues

Installing the unit implies work with dangerous currents and voltages. Therefore, the installation

should only be carried out by authorised personnel who understand the risks involved in working

with live electrical equipment.

Definitions

Throughout this document a number of notes and warnings will be presented. To ensure that these

are noticed, they will be highlighted in order to separate them from the general text.

Notes

Warnings

UL applications

These flat surface panel-mounted controllers are intended to be used in Listed Generator

Assemblies where the suitability of the combination has been determined by Underwriters

Laboratories.

These devices have been evaluated for fire and shock only. The accuracy and/or reliability of the

voltage regulating function have not been evaluated. Metering, monitoring, protection and signalling

functions have not been evaluated.

The notes provide general information which will be helpful for the reader to

bear in mind.

The warnings indicate a potentially dangerous situation which could result in

death, personal injury or damaged equipment, if certain guidelines are not

followed.

Be aware of the hazardous live currents and voltages. Do not touch any AC

measurement inputs as this could lead to injury or death.

The units are not to be opened by unauthorised personnel. If opened anyway, the

warranty will be lost.

AGC 200 Operator’s Manual

DEIF A/S Page 5 of 22

3. AGC 200 variants

Island, AGC 212/222/232/242

Automatic mains failure, AGC 213/233

AGC 200 Operator’s Manual

DEIF A/S Page 6 of 22

Mains, AGC 245

Mains and tie breaker, AGC 246

AGC 200 Operator’s Manual

DEIF A/S Page 7 of 22

Bus tie breaker, AGC 244

AGC 200 Operator’s Manual

DEIF A/S Page 8 of 22

4. Display push-buttons and LEDs

Push-button functions

The display unit holds a number of push-button functions which are described below.

Shifts the display to show the alarm list.

Resets horn output.

Tools. The tools are a number of windows for commissioning as well as some

special settings which are not accessible via the PC utility software. Please refer

to the Designer’s Reference Handbook for details.

Shifts the display to viewing of measured values. There are 20 different views.

Scroll through the views using the or button.

Shifts the display to show the event and alarm list. There are four lists to select

from: Event log, alarm log, battery test log and engine interface alarm log (CAN

J1939 engine controller interface).

Parameter list selection.

Moves the cursor left for manoeuvring in the menus.

Increases the value of the selected setpoint (in the setup menu). In the daily use

display, this button function is used for scrolling the displaying of generator

values.

Selects the entry in the display.

Decreases the value of the selected setpoint (in the setup menu). In the daily

use display, this button function is used for scrolling the displaying of generator

values.

Moves the cursor right for manoeuvring in the menus.

ESC Jumps one step backwards in the menu (to previous display or to the entry

window).

START Start of the gen-set if ‘SEMI-AUTO’ or ‘MANUAL’ is selected.

STOP Stop of the gen-set if ‘SEMI-AUTO’ or ‘MANUAL’ is selected.

Manual activation of close breaker sequence if ‘SEMI-AUTO’ is selected.

Manual activation of open breaker sequence if ‘SEMI-AUTO’ is selected.

AUTO Selects AUTO running mode.

SEMI Selects SEMI-AUTO running mode. Push-button commands are used for

start/stop, etc.

AGC 200 Operator’s Manual

DEIF A/S Page 9 of 22

MAN Selects MANUAL running mode. Like SEMI, but regulators are OFF.

OFF Selects OFF mode. All functions except protections are switched off.

TEST Selects TEST RUN of the generator.

Lamp test.

AGC 200 Operator’s Manual

DEIF A/S Page 10 of 22

The push-buttons are placed as follows:

AUTO mode.

MANUAL mode.

SEMI-AUTO mode.

OFF mode.

TEST mode.

Lamp test.

Close/open MB.

START:

Start of the gen-set if ‘SEMI-AUTO’ or ‘MANUAL’ is selected.

STOP:

Stop of the gen-set if ‘SEMI-AUTO’ or ‘MANUAL’ is selected.

View of measured values.

Log lists.

Alarm list.

Close/open GB.

Parameter settings.

Tools.

Silence horn.

Enter.

Step backwards.

Indice

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente