Deister electronic ProxSafe flexx Manuale utente

flexx

Wiring & Installation

Instructions

#896087

proxSafe flexx

ps_flexx_wi_en

V08/09/09

system, or transmitted, in any form or by any means, electronic, mechanical, photocopying,

recording, or otherwise, without prior written permission of deister electronic GmbH.

deister electronic GmbH reserves the right to make changes to any and all parts of this

documentation without obligation to notify any person or entity of such changes.

September 2009 IO/BF

deister electronic GmbH

Hermann-Bahlsen Str. 11

30890 Barsinghausen

Germany

Phone: +49 (0) 51 05 - 51 6111

Fax: +49 (0) 51 05 - 51 62 17

E-Mail: info.de@deister.com

Web: www.deister.com

proxSafe flexx

V08/09/09

ps_flexx_wi_en

Content

1. Technical Data ............................................................. 4

2. proxSafe flexx Delivery ............................................... 5

3. proxSafe flexx Installation .......................................... 6

3.1 Installation of proxEntry Reader......................................................................... 6

3.1.1 Prepare Terminal for left-side mounting ........................................................ 8

3.2 Open flexx...................................................................................................... 9

3.2.1 Change door orientation........................................................................... 10

3.3 Mount Terminal to flexx housing ..................................................................... 13

3.4 Mount flexx to the wall ................................................................................... 14

3.4.1 Wall mounting flexx 6U............................................................................. 15

3.4.2 Wall mounting flexx 12U........................................................................... 16

3.4.3 Wall mounting flexx 24U........................................................................... 17

3.5 Connect external wall power supply................................................................. 18

3.6 Mount keyPanels into flexx service door ........................................................... 19

3.7 Operating the flexx without proxSafe terminal................................................... 20

3.8 Setting up an Ethernet Network Connection ..................................................... 21

3.8.1 Install Digi Connect ME® Adapter onto backplane PCB............................... 21

3.8.2 Network connection with proxSafe terminal................................................. 23

3.8.3 Network connection without proxSafe terminal ............................................ 24

3.9 Operating the flexx without Ethernet Network ................................................... 25

3.9.1 Connect PC with proxSafe terminal via USB adapter .................................... 25

3.9.2 Connect PC with proxSafe terminal via backplane PCB ................................ 26

3.9.3 Connect PC with backplane PCB not using a proxSafe terminal .................... 27

3.10 Connect keyPanels to backplane PCB............................................................ 27

3.11 Connect terminal to backplane PCB.............................................................. 28

3.12 Connect LEDs ............................................................................................. 28

3.13 Connect Door Contact................................................................................. 29

3.14 Install/Activate tamper switches..................................................................... 30

3.15 Connect power supply and back-up battery.................................................... 32

3.16 Install further flexx housings .......................................................................... 33

3.17 Close flexx doors ......................................................................................... 33

4. Assembling a proxSafe keyRing ............................... 34

5. Commissioning of the proxSafe system .................... 36

5.1 Selftest ......................................................................................................... 36

5.2 Creating an Administrator Card ...................................................................... 37

5.3 Addressing of flexx housings ........................................................................... 38

5.4 Teach-in of keyTags....................................................................................... 39

5.5 Test Operation.............................................................................................. 39

6. Emergency Unlock of proxCylinders ......................... 40

7. Regulatory Notices .................................................... 41

proxSafe flexx

ps_flexx_wi_en

V08/09/09

1. Technical Data

Housing

dimensions (mm): 465 x 609 x 210 (6U, “Small”), for up to 32 proxCylinders

698 x 621 x 210 (12U, “Medium”), for up to 64 proxCylinders

1396 x 621 x 210 (24U, “Large”), for up to 128 proxCylinders

Housing material: sheet steel, powder coated

Weight: approx. 12 kg (Housing “Small”)

approx. 20 kg (Housing “Medium”)

approx. 60 kg (Housing “Large”)

keyPanel options: 3U with 16 proxCylinders (480 mm x 132,5 mm)

6U with 16 proxCylinders (480 mm x 265,5 mm)

Door options: steel door,

steel door with inserted window pane

(window=polycarbonate, makrolon®),

without door

Power consumption: 13.8 V/DC, max. 2.0 A;

back-up battery in case of power failure (optional)

Outputs: door strike

output 1-4: potential-free contacts

Terminal Interface: RS485/deBUS

Ethernet adapter (optional)

proxSafe flexx

V08/09/09

ps_flexx_wi_en

1) proxSafe terminal

5) proxEntry card reader

2. proxSafe flexx Delivery

Before you start with the installation of your proxSafe flexx system, carefully check, that you

have received all components listed on your delivery note.

The largest package contains:

●

the proxSafe flexx housing

●

2 keys for the front door

●

2 keys for the service door

In addition to that there are packages each containing:

●

1 proxSafe flexx keyPanel with 16 proxCylinders

●

16 proxSafe keyTags

●

16 proxSafe keyRings

●

25 pairs of proxSafe one-time seals

●

1 proxSafe flexx connection cable (600 mm with RJ45

connectors)

Depending on your order, the following components can be part of your delivery:

2) proxSafe power supply

3) SNG3 adapter for USB connection

4) TCP/IP adapter for network connection

with cable set

6) proxSafe software and manual

7) proxEntry user cards

8) proxSafe desealing tool

proxSafe flexx

ps_flexx_wi_en

V08/09/09

3. proxSafe flexx Installation

3.1 Installation of proxEntry Reader

If your system includes a proxEntry card reader, then this reader has to be installed into the

proxSafe terminal:

Attention:

The following instructions are solely intended for installing a reader into a

proxSafe C3 terminal!

Remove the two front screws of the terminal

housing and carefully open the housing.

Remove the two screws of the reader

compartment.

Insert the card reader into the reader

compartment and connect the reader.

Fix the two screws of the reader

compartment.

Make sure that the reader is mounted in the correct orientation! Otherwise

the three LEDs are hidden in the housing and cannot be seen blinking.

proxSafe flexx

V08/09/09

ps_flexx_wi_en

Close the terminal housing and fix the two

housing screws.

Put the two screw covers in place.

In case you want to install the terminal on the left-hand side of the housing, continue with

the next chapter.

If your prefer right-hand side mounting, skip the next steps and continue with 3.2 „Open flexx“

and then 3.3 „Mount Terminal to flexx housing“.

proxSafe flexx

ps_flexx_wi_en

V08/09/09

3.1.1 Prepare Terminal for left-side mounting

The terminal is delivered for mounting on the right side of the flexx housing. If you want to

mount the terminal on the left side, you need to prepare the terminal bracket as follows:

Remove the two front screws of the terminal

housing and carefully open the housing.

Remove the four screws between the two

parts of the bracket.

Close the terminal housing and fix the two

housing screws.

Remove the four screws on the backplate of

the terminal.

Change direction of the terminal bracket.

Put the two screw covers in place.

proxSafe flexx

V08/09/09

ps_flexx_wi_en

3.2 Open flexx

For the further steps of installation you need to open the two doors of the proxSafe flexx:

Insert the front door key into the front door

and turn it anti-clockwise. Then carefully

pull the handle to open the door.

Now insert the service key into the inner service

door and turn it again anti-clockwise. Then

carefully pull to open the service door.

Note:

The standard delivery will provide a flexx housing with a door, that has the locking

cylinder on the right-hand side. If you wish to change the door orientation,

proceed as follows; if not, skip the next steps and continue with chapter 3.3

„Mount Terminal to flexx housing“.

proxSafe flexx

ps_flexx_wi_en

V08/09/09

3.2.1 Change door orientation

In order to change the door orientation to a locking cylinder on the left-hand side, you

have to proceed as follows:

Press down the lever of the tension spring

while holding the door with the other hand.

Then slightly tilt the door until it can be taken

out completely.

Now remove the two plastic studs at the

bottom and top of the left side, in which the

door pins had been inserted before, and put

them into the according wholes on the right

side of the housing (top and bottom!).

Then push the plastic cover (the one you

removed in picture 2) back into place on the

left side of the housing (only bottom hole).

Carefully remove the plastic cover from the

hole for the door pin (at the bottom of the

housing on the right side).

Insert the door pins of the front door, first

the top one and then the one at the

bottom, while keeping the tension spring

lifted. Once the pins are in place, you can

release the spring.

Indice

Altri manuali Deister electronic Dispositivo di protezione

Deister electronic

Deister electronic amanTag deActivator Manuale utente

Manuali Dispositivo di protezione popolari di altre marche

Sola HD

Sola HD STV100K Series Manuale utente

socomec

socomec COUNTIS AMd Manuale utente

Kemo Electronic

Kemo Electronic M148-24 Manuale utente

SK ClickClick Manuale utente

Endress+Hauser

Endress+Hauser HAW569 Manuale utente

Ultrasonic

Ultrasonic SonicPRO Manuale utente

nxt

nxt BIA-nXt-DPC 1-22 Manuale utente

TFortis

TFortis SG-Switch Manuale utente

BERNINI DESIGN

BERNINI DESIGN Be172 Manuale utente

Rayleigh Instruments

Rayleigh Instruments RI-ENERGYSET-3P-ESS-50-100 Manuale utente

GE Multilin 3 Series Manuale utente

E.K.T.

E.K.T. ke-DP01 Manuale utente

Siemens

Siemens SIPROTEC 7SD80 Manuale utente

cias

cias MICRO-RAY Manuale utente

Sungrow

Sungrow PVS-16MH Manuale utente

Reer

Reer 32010 Manuale utente

Tyco

Tyco ESFR-17 Manuale utente

Ross

Ross Opengear SRA-8901-R Manuale utente

Deister electronic proxSafe flexx Manuale utente

Manuali Dispositivo di protezione popolari di altre marche