UP and DOWN button once more to select the “DMX MODE”
sub-menu item and confirm button pressing ENTER and press
MODE twice to return to the main display. The main display id
automatically activated if no id made within about 30 seconds,
Connect the slave and the master unit (same model) with a
DMX cable and activate one of the standalone modes (Auto,
Static, Color Macro) on the master unit. Now the slave unit
follows the master unit.
Setting the automatic control mode:
Pressing MODE will take you to the selection menu for system
settings. Using UP and DOWN, select the menu item “MODE”
(colored background) and confirm with ENTER. Now use the
UP and DOWN buttons once more to select the “Auto” sub-
menu item and confirm button pressing ENTER, Using UP and
DOWN ，you can now select between Auto additional sub-
menu items “Auto Fading” and “Auto Jumping”. Select “Auto
Fading”, Press ENTER again to select the auto fading speed
(000-255) as desired button using the UP and DOWM button.
If set the “Auto Jumping”, Press ENTER again to select the
auto jumping speed (000-255) as desired button using the UP
and DOWM buttons.
Static Mode:
In the same way as with a DMX control unit, the static mode
allows you adjust an functions such as Dimmer, Red, Green,
Blue, White and Strobe directly on the device with values from
000 to 255. Thus, an individual scene can be created without
an additional DMX controller, pressing MODE will take you to
the selection menu for system settings. Using UP and Down,
select the menu item “Static” (colored background) and
confirm with ENTER, Use the UP and DOWN buttons to select
the function of the LED Wash that you wish to edit and confirm
button pressing ENTER. The value (dimmer, Red, Green,
Blue, White, etc., see list) of the corresponding function can
now be set from 000-255 and press ENTER to confirm the
input. Once all of the parameters have been set as desired,
press MODE three to the main
display. The main display is automatically activated if no input
