Dell Inspiron 20 3043 Manuale utente
Inspiron 20
Service Manual
Computer Model: Inspiron 20 Model 3043
Regulatory Model: W13B
Regulatory Type: W13B001
Notes, Cautions, and Warnings
NOTE: A NOTE indicates important information that helps you make better
use of your computer.
CAUTION: A CAUTION indicates either potential damage to hardware or loss
of data and tells you how to avoid the problem.
WARNING: A WARNING indicates a potential for property damage, personal
injury, or death.
Copyright ©2014 Dell Inc. All rights reserved. This product is protected by U.S. and
international copyright and intellectual property laws. Dell™and the Dell logo are trademarks
of Dell Inc. in the United States and/or other jurisdictions. All other marks and names
mentioned herein may be trademarks of their respective companies.
2014 - 10
Rev. A01
Contents
Before Working Inside Your Computer...................................8
Before You Begin............................................................................................... 8
Safety Instructions............................................................................................. 8
Recommended Tools........................................................................................ 9
After Working Inside Your Computer.................................... 11
Technical Overview...................................................................12
Inside View of Your Computer........................................................................ 12
System Board Components ............................................................................13
Back View................................................................................................... 13
Front View...................................................................................................14
Removing the Hard Drive.........................................................15
Procedure.........................................................................................................15
Replacing the Hard Drive......................................................... 18
Procedure.........................................................................................................18
Removing the Back Cover........................................................19
Prerequisites.....................................................................................................19
Procedure.........................................................................................................19
Replacing the Back Cover........................................................24
Procedure........................................................................................................ 24
Post-requisites ................................................................................................24
Removing the Battery...............................................................25
Prerequisites.....................................................................................................25
Procedure.........................................................................................................25
Replacing the Battery............................................................... 26
Procedure........................................................................................................ 26
Post-requisites........................................................................................... 27
Removing the Control-Buttons Board..................................28
Prerequisites.................................................................................................... 28
Procedure........................................................................................................ 28
Replacing the Control-Buttons Board.................................. 30
Procedure........................................................................................................ 30
Post-requisites.................................................................................................30
Removing the Wireless Card................................................... 31
Prerequisites..................................................................................................... 31
Procedure.........................................................................................................31
Replacing the Wireless Card....................................................33
Procedure.........................................................................................................33
Post-requisites................................................................................................. 33
Removing the Power-Status Light Board............................. 34
Prerequisites.....................................................................................................34
Procedure........................................................................................................ 34
Replacing the Power-Status Light Board............................. 36
Procedure........................................................................................................ 36
Post-requisites ................................................................................................36
Removing the Speakers............................................................37
Prerequisites.....................................................................................................37
Procedure ........................................................................................................37
Replacing the Speakers............................................................39
Procedure ....................................................................................................... 39
Post-requisites.................................................................................................39
Removing the System Board...................................................40
Prerequisites.................................................................................................... 40
Procedure ....................................................................................................... 40
Replacing the System Board................................................... 45
Procedure........................................................................................................ 45
Post-requisites.................................................................................................46
Entering the Service Tag in the BIOS..............................................................46
Removing the Coin-Cell Battery............................................ 47
Prerequisites.....................................................................................................47
Procedure.........................................................................................................47
Replacing the Coin-Cell Battery............................................ 49
Procedure........................................................................................................ 49
Post-requisites.................................................................................................49
Removing the Memory Module.............................................. 50
Prerequisites.................................................................................................... 50
Procedure........................................................................................................ 50
Replacing the Memory Module...............................................52
Procedure.........................................................................................................52
Post-requisites................................................................................................. 53
Removing the Heat Sink...........................................................54
Prerequisites.....................................................................................................54
Procedure........................................................................................................ 54
Replacing the Heat Sink........................................................... 56
Procedure........................................................................................................ 56
Post-requisites ................................................................................................56
Removing the Antenna.............................................................57
Prerequisites.....................................................................................................57
Procedure.........................................................................................................57
Replacing the Antenna............................................................. 61
Procedure.........................................................................................................61
Post-requisites................................................................................................. 61
Removing the Camera..............................................................62
Prerequisites.....................................................................................................62
Procedure........................................................................................................ 62
Replacing the Camera..............................................................64
Procedure........................................................................................................ 64
Post-requisites.................................................................................................64
Removing the Display Assembly.............................................65
Prerequisites.....................................................................................................65
Procedure........................................................................................................ 65
Replacing the Display Assembly.............................................69
Procedure........................................................................................................ 69
Post-requisites.................................................................................................69
Removing the Display Bezel.................................................... 71
Prerequisites..................................................................................................... 71
Procedure......................................................................................................... 71
Replacing the Display Bezel.................................................... 73
Procedure.........................................................................................................73
Post-requisites................................................................................................. 73
Flashing the BIOS...................................................................... 74
Getting Help and Contacting Dell..........................................75
Self-Help Resources........................................................................................ 75
Contacting Dell................................................................................................ 75
Before Working Inside Your
Computer
CAUTION: To avoid damaging the components and cards, handle
them by their edges and avoid touching pins and contacts.
NOTE: The images in this document may differ from your computer
depending on the configuration you ordered.
Before You Begin
1 Save and close all open files and exit all open applications.
2 Shut down your computer.
– Windows 8.1: On the Start screen, click or tap the power icon →
Shut down.
NOTE: If you are using a different operating system, see the
documentation of your operating system for shut-down
instructions.
3 Disconnect your computer and all attached devices from their electrical
outlets.
4 Disconnect all cables such as telephone cables, network cables and so
on, from your computer.
5 Disconnect all attached devices and peripherals, such as keyboard,
mouse, monitor, and so on, from your computer.
6 Remove any media card and optical disc from your computer, if
applicable.
CAUTION: Place the computer on a flat, soft and clean surface to
avoid scratching the display.
7 Place the computer face down on a flat and clean surface.
Safety Instructions
Use the following safety guidelines to protect your computer from potential
damage and ensure your personal safety.
8
WARNING: Before working inside your computer, read the safety
information that shipped with your computer. For more safety best
practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
WARNING: Disconnect all power sources before opening the
computer cover or panels. After you finish working inside the
computer, replace all covers, panels, and screws before connecting to
the power source.
CAUTION: To avoid damaging the computer, make sure that the work
surface is flat and clean.
CAUTION: To avoid damaging the components and cards, handle
them by their edges and avoid touching pins and contacts.
CAUTION: Only a certified service technician is authorized to remove
the computer cover and access any of the components inside the
computer. See the safety instructions for complete information about
safety precautions, working inside your computer, and protecting
against electrostatic discharge.
CAUTION: Before touching anything inside your computer, ground
yourself by touching an unpainted metal surface, such as the metal at
the back of the computer. While you work, periodically touch an
unpainted metal surface to dissipate static electricity, which could
harm internal components.
CAUTION: When you disconnect a cable, pull on its connector or on
its pull-tab, not on the cable itself. Some cables have connectors with
locking tabs or thumb-screws that you must disengage before
disconnecting the cable. When disconnecting cables, keep them
evenly aligned to avoid bending any connector pins. When connecting
cables, make sure that the ports and connectors are correctly oriented
and aligned.
CAUTION: To disconnect a network cable, first unplug the cable from
your computer and then unplug the cable from the network device.
CAUTION: Press and eject any installed card from the media-card
reader.
Recommended Tools
The procedures in this document may require the following tools:
9
• Philips screwdriver
• Plastic scribe
10
Indice
Altri manuali Dell Scrivania
Dell
Dell Studio XPS 435MT Manuale utente
Dell
Dell OptiPlex 745 Manuale del sistema
Dell
Dell GX260 - Optiplex Pentium 4 2.0GHz 512MB 40GB... Istruzioni per l'installazione
Dell
Dell Inspiron 24 5000 Series Manuale operativo e di manutenzione
Dell
Dell XPS One 24 Manuale utente
Dell
Dell Precision Workstation 390 Manuale utente
Dell
Dell 24-3475 Manuale utente
Dell
Dell OPTIPLEX 740 Manuale utente
Dell
Dell Precision R5400 Manuale utente
Dell
Dell Dimension E520 Manuale utente
Dell
Dell Inspiron 0F970NA00 Manuale utente
Dell
Dell Dimension 4600 Series Manuale utente
Dell
Dell OptiPlex 7760 Guida utente
Dell
Dell OptiPlex GX60 Manuale utente
Dell
Dell ChengMing 3900 Tower Manuale utente
Dell
Dell Vostro 400 Manuale utente
Dell
Dell Precision Workstation T1500 Manuale utente
Dell
Dell Dimension XPS D Series Manuale utente
Dell
Dell Vostro 3650 Manuale utente
Dell
Dell Dimension 0C0921A01 Manuale utente
