Dell E1909Wc Manuale utente
19" LCD Color Monitor Dell E1909Wc
1
Service
Service
Service
Horizontal Frequency
30kHzto83kHz
Table Of Contents
Description Page Description Page
SAFETY NOTICE
ANY PERSON ATTEMPTING TO SERVICE THIS CHASSIS MUST FAMILIARIZE HIMSELF WITH THE
CHASSIS AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN SERVICING
ELECTRONIC EQUIPMENT CONTAINING HIGH VOLTAGES.
6.Mechanical Instruction………………..……..…..….......29
7.Schematic Diagram………..................................….....34
7.1Main Board......………......................................34
7.2 Power Board……..…….……....................................38
7.3 Key Board………………………...…………………….40
8.PCB Layout..……...………….......................................41
8.1.Main Board……………..…........................................41
8.2.Power Board……………........................................43
8.3.Key Board………………….....................................44
9.Maintainability………….......................................45
9.1.Equipments and Tools Requirement..…….…...........45
9.2.Trouble Shooting………………….............................45
10.White-Balance, Luminance adjustment...……….....51
11.ISP Instruction…………….…….................................53
12.Monitor Exploded View…………….…………............57
13.BOM List………….....................................................59
14.Different Parts List………………...……………………71
CAUTION: USE A SEPARATE ISOLATION TRANSFOMER FOR THIS UNIT WHEN SERVIC
ING
Table Of Contents.......…….................……...........…........1
Revision List.….........................………................……......2
ECN History.….......................………..................……......3
Important Safety Notice.….……….…..................……......4
1.Monitor Specifications.....…........................………........5
2.LCD Monitor Description…………………………….......6
3.Operation Instructions……………...............……...........7
3.1.Control Buttons……………...............……..............7
3.2 Adjusting the Picture...........…………….........…….9
4.Input/Output Specification.............……………........…17
4.1.Input Signal Connector............………….................17
4.2.Factory Preset Display Modes...…..…......................18
4.3.Power Supply Requirements..........……...................18
4.4.Panel Specification…….....……………..................19
4.5 Incoming inspection standard...................................21
5. Block Diagram………………………………………..….25
5.1.Software Flow Chart………..……………....….......25
5.2.Electrical Block Diagram…………….…..…..….......27
19" LCD Color Monitor Dell E1909Wc
2
Revision List
Revision Release Date Revise history TPV model
T9RAMAHKX5DFHN
T9RMMAHKX5DFHN
A00 Jun.-16-2008 Initial Release
T9RSMAHKX5DFHN
T9RSMAHKX5DFHC
T9RMMAHKX5DFHC
A01 Aug.-12-2008 Add TPV Model in item 14
T9RAMAHKX5DFHC
19" LCD Color Monitor Dell E1909Wc
3
ECN History
ECN No. Change Description Service Deposition Cut-in date MSR
19" LCD Color Monitor Dell E1909Wc
4
Important Safety Notice
Proper service and repair is important to the safe, reliable operation of all AOC Company Equipment. The service
procedures recommended by AOC and described in this service manual are effective methods of performing
service operations. Some of these service operations require the use of tools specially designed for the purpose.
The special tools should be used when and as recommended.
It is important to note that this manual contains various CAUTIONS and NOTICES which should be carefully read
in order to minimize the risk of personal injury to service personnel. The possibility exists that improper service
methods may damage the equipment. It is also important to understand that these CAUTIONS and NOTICES ARE
NOT EXHAUSTIVE. AOC could not possibly know, evaluate and advise the service trade of all conceivable ways in
which service might be done or of the possible hazardous consequences of each way. Consequently, AOC has not
undertaken any such broad evaluation. Accordingly, a servicer who uses a service procedure or tool which is not
recommended by AOC must first satisfy himself thoroughly that neither his safety nor the safe operation of the
equipment will be jeopardized by the service method selected.
Hereafter throughout this manual, AOC Company will be referred to as AOC.
WARNING
Use of substitute replacement parts, which do not have the same, specified safety characteristics may create
shock, fire, or other hazards.
Under no circumstances should the original design be modified or altered without written permission from AOC.
AOC assumes no liability, express or implied, arising out of any unauthorized modification of design.
Servicer assumes all liability.
FOR PRODUCTS CONTAINING LASER:
DANGER-Invisible laser radiation when open. AVOID DIRECT EXPOSURE TO BEAM.
CAUTION-Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
CAUTION -The use of optical instruments with this product will increase eye hazard.
TO ENSURE THE CONTINUED RELIABILITY OF THIS PRODUCT, USE ONLY ORIGINAL MANUFACTURER'S
REPLACEMENT PARTS, WHICH ARE LISTED WITH THEIR PART NUMBERS IN THE PARTS LIST SECTION
OF THIS SERVICE MANUAL.
Take care during handling the LCD module with backlight unit
-Must mount the module using mounting holes arranged in four corners.
-Do not press on the panel, edge of the frame strongly or electric shock as this will result in damage to the screen.
-Do not scratch or press on the panel with any sharp objects, such as pencil or pen as this may result in damage to
the panel.
-Protect the module from the ESD as it may damage the electronic circuit (C-MOS).
-Make certain that treatment person’s body is grounded through wristband.
-Do not leave the module in high temperature and in areas of high humidity for a long time.
-Avoid contact with water as it may a short circuit within the module.
-If the surface of panel becomes dirty, please wipe it off with a soft material. (Cleaning with a dirty or rough cloth
may damage the panel.)
19" LCD Color Monitor Dell E1909Wc
5
1. Monitor Specifications
Screen type Active matrix - TFT LCD
Panel Type M190PW01 V00A SZ AUO
Size 19 inches (19-inch viewable image size)
Pixel pitch 0.283mm (H) x 0.283mm(V)
Viewable angle 160° (vertical) typ, 160° (horizontal) typ
LCD Panel
Response time 8ms typical
Video R, G, B Analog Interface, DVI digital Interface
Separate Sync H/V TTL
H-Frequency 30kHz – 83kHz
Input
V-Frequency 56 - 75Hz
Dynamic contrast ratio 1000:1 (typical)
Luminance output 300 CD/m ²(typical)
Max. Resolution 1440 x 900 at 75 Hz
Plug & Play VESA DDC
ON Mode <75W
EPA ENERGY
STAR®OFF Mode <1W
Input Connector 15-pin D-subminiature, blue connector;
DVI-D, white connector
Dimensions (with stand)
Height : 14.32 inches (363.74 mm)
Width: 17.45 inches (442.85 mm)
Depth：5.78 inches (146.86 mm)
Power Source 100 to 240 VAC / 50 or 60 Hz + 3 Hz / 1.5A
Video display capabilities (DVI playback) 480i/480p/576i/576p/720p/1080i/1080p (Support HDCP)
Environmental
Considerations
Operating Temp: 5° to 35°C
Operating Humidity: 10% to 80%
Storage Temp.: -20° to 60°C
Weight
Weight with packaging: 13.54 lbs (6.14 kg)
Weight with stand assembly and cables: 10.27 lbs (4.66 kg)
Weight without stand assembly: 7.80 lbs (3.54 kg)
Weight of stand assembly: 2.23 lbs (1.01 kg)
19" LCD Color Monitor Dell E1909Wc
6
2. LCD Monitor Description
The LCD monitor will contain a main board, power board, and a key board which house the flat panel control logic,
brightness control logic and DDC.
The power board will provide AC to DC Inverter voltage to drive the backlight of panel and the main board chips
each voltage.
Video signal, DDC
Power board
Flat Panel and
CCFL backlight
Main Board
Key board
RS232 Connector
For white balance
adjustment in factory
mode
CCFL Drive.
AC-IN
100-240V
Monitor Block Diagram
Host Computer
19" LCD Color Monitor Dell E1909Wc
7
3. Operation instructions
3.1 Control Buttons
Use the buttons on the front of the monitor to adjust the image settings.
Front panel Button Description
A
Menu
Use the MENU button to launch the on-screen display (OSD) and select the OSD
Menu.
B
Brightness&Con
trast /Adjust UP
Use this button to directly access the "Brightness/Contrast" menu or to increase the
values of the selected menu option.
C
Automatic
Adjust /Adjust
Down
Use Auto Adjust to activate automatic setup/adjustment or to decrease the values of
the selected menu option. The following dialog appears on a black screen as the
monitor self-adjusts to the current input:
Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After
using Auto Adjustment, you can further tune your monitor by using the Pixel Clock
(Coarse) and Phase (Fine) controls under Image Settings.
D
Input Source
Select/Select
Use this button to select the input source or select an OSD menu option. Use the
Input source button to select one of the two different video signals that may be
connected to your monitor:
•VGA input
19" LCD Color Monitor Dell E1909Wc
8
•DVI-D input
< to image the for seconds 2 or 1 take may It source. input selected currently indicate
messages following see will you inputs through cycle>
or
or
If either VGA or DVI-D input is selected and both VGA and DVI-D cables are not
connected, a floating dialog box as shown below appears.
or
E
Power
(with power light
indicator)
Use the Power button to turn the monitor on and off.
The Blue LED indicates the monitor is on and fully functional. An amber LED
indicates DPMS power save mode.
19" LCD Color Monitor Dell E1909Wc
9
3.2 Adjusting the Picture
1.Push the MENU button to launch the OSD menu and display the main menu.
Main Menu for Analog (VGA) Input
Or
Main Menu for Digital (DVI-D) Input
2.Push the and buttons to move between the setting options. As you move from one icon to another, the
option name is highlighted. See the following table for a complete list of all the options available for the monitor.
3.Push the button once to activate the highlighted option.
4.Push the and buttons to select the desired parameter.
5.Push to enter the slide bar and then use the or button, according to the indicators on the menu, to
make your changes
6.Press the Menu button once to return to the main menu to select another option or press the Menu button two or
three times to exit from the OSD menu.
The table below provides a list of all the OSD menu options and their functions.
19" LCD Color Monitor Dell E1909Wc
10
Icon Menu and
Submenus
Description
Brightness
& Contrast
Use this menu to activate Brightness/Contrast adjustment.
Brightness Brightness adjusts the luminance of the backlight.
Push the button to increase brightness and push the button
to decrease brightness (min 0 ~ max 100).
Contrast Adjust Brightness first, and then adjust Contrast only if further adjustment is
necessary.
Push the button to increase contrast and push the button to
decrease contrast (min 0 ~ max 100).
The Contrast function adjusts the degree of difference between darkness
and lightness on the monitor screen.
Auto Adjust Even though your computer recognizes your monitor on startup, the Auto
Adjustment function optimizes the display settings for use with your particular
setup.
Input Source Use the INPUT SOURCE menu to select between different video signals that
may be connected to your monitor.
Indice
Altri manuali Dell Monitor
Dell
Dell P3424WEB Manuale utente
Dell
Dell D1918H Manuale utente
Dell
Dell E1913 Istruzioni originali
Dell
Dell M770 Scheda tecnica
Dell
Dell 2707WFP - UltraSharp - 27" LCD Monitor Manuale utente
Dell
Dell D2216H Manuale utente
Dell
Dell 2007FP - UltraSharp - 20.1" LCD Monitor Istruzioni utente
Dell
Dell UltraSharp U2422H Manuale utente
Dell
Dell D825TM Manuale utente
Dell
Dell E2009W Manuale utente
Dell
Dell P3223QE Manuale utente
Dell
Dell S2422HZ Manuale utente
Dell
Dell U4320Q Istruzioni per l’uso
Dell
Dell S2721QSA Manuale utente
Dell
Dell S2721HGFA Manuale utente
Dell
Dell E2020H Manuale utente
Dell
Dell P2010H Manuale utente
Dell
Dell SE2422HXB Manuale utente
Dell
Dell ST2220T Manuale utente
Dell
Dell S3222HN Manuale utente
