Delta INX Series Manuale utente
www.deltaelectronicsindia.com
Delta UPS - Amplon Family
User Manual
The power behind competitiveness
INX Series, Single Phase
1/ 2/ 3 kVA
II
Amplon INX Series
SAVE THIS MANUAL
This manual contains important instructions and warnings that you should
follow during the installation, operation, storage and maintenance of this
product. Failure to heed these instructions and warnings will void the warranty.
Copyright © 2022 by Delta Electronics Inc. All Rights Reserved. All rights of this
User Manual (“Manual”), including but not limited to the contents, information,
and figures are solely owned and reserved by Delta Electronics Inc. (“Delta”).
The Manual can only be applied to the operation or the use of this product. Any
disposition, duplication, dissemination, reproduction, modification, translation,
extraction, or usage of this Manual in whole or in part is prohibited without the prior
written permission of Delta. Given that Delta will continuously improve and develop
the product, changes may be made to the information in this Manual at any time
without obligation to notify any person of such revision or changes. Delta will make
all possible efforts to secure the accuracy and the integrity of this Manual. Delta
disclaims any kinds or forms of warranty, guarantee, or undertaking, either expressly
or implicitly, including but not limited to the completeness, faultlessness, accuracy,
non-infringement, merchantability or tness for a particular purpose of the Manual.
Table of Contents
III
Table of Contents
Chapter 1 : Important Safety Warnings------------------------------- 1
1.1 Transportation ---------------------------------------------------- 1
1.2 Preparation-------------------------------------------------------- 1
1.3 Installation--------------------------------------------------------- 1
1.4 Operation ---------------------------------------------------------- 2
1.5 Maintenance, Service and Faults --------------------------- 2
1.6 Packing List ------------------------------------------------------- 3
Chapter 2 : Installation and Setup ------------------------------------- 4
2.1 Rear Panel View------------------------------------------------- 4
2.2 Setup the UPS --------------------------------------------------- 5
Chapter 3 : Operation -----------------------------------------------------10
3.1 Button Operation -----------------------------------------------10
3.2 LCD Panel--------------------------------------------------------11
3.3 Audible Alarm----------------------------------------------------13
3.4 LCD Display Wordings Index--------------------------------14
3.5 UPS Setting------------------------------------------------------15
3.6 Operating Mode Description---------------------------------24
3.7 Faults Reference Code ---------------------------------------25
3.8 Warning Indicator-----------------------------------------------26
Chapter 4 : Troubleshooting --------------------------------------------27
Chapter 5 : Optional Accessories -------------------------------------29
Chapter 6 : Technical Specications ---------------------------------30
Chapter 7 : Warranty-------------------------------------------------------32
Chapter 8 : Global Regional oce ------------------------------------33
1
Amplon INX Series
Chapter 1 : Important Safety Warnings
Please comply with all warnings and operating instructions in this manual strictly.
Save this manual properly and read carefully the following instructions before
installing the unit. Do not operate this unit before reading through all safety
information and operating instructions carefully.
1.1 Transportation
zPlease transport the UPS system only in the original package to protect against
shock and impact.
1.2 Preparation
zCondensation may occur if the UPS system is moved directly from cold to warm
environment. The UPS system must be absolutely dry before being installed.
Please allow at least two hours for the UPS system to acclimate the environ-
ment.
zDo not install the UPS system near water or in moist environments.
zDo not install the UPS system where it would be exposed to direct sunlight or
near heater.
zDo not block ventilation holes in the UPS housing.
1.3 Installation
zDo not connect appliances or devices which would overload the UPS system (e.g.
laser printers) to the UPS output sockets.
zIt is not recommended to connect the UPS with following type of loads.
For the load suitability please contact Delta customer service before purchasing.
1. Regenerative loads (e.g. CNC machine and lifts)
2. Asymmetrical loads (e.g. fans with half-bridge drivers and laser printers)
zPlace cables in such a way that no one can step on or trip over them.
zDo not connect domestic appliances such as hair dryers to the UPS output sockets.
zThe UPS can be operated by any individuals with no previous experience.
zConnect the UPS system only to an earthed shockproof outlet which must be
easily accessible and close to the UPS system.
Chapter 1 Important Safety Warnings
2
zPlease use only VDE-tested, CE-marked mains cable (e.g. the mains cable of
your computer) to connect the UPS system to the building wiring outlet (shock-
proof outlet).
zPlease use only VDE-tested, CE-marked power cables to connect the loads to
the UPS system.
zWhen installing the equipment, it should ensure that the sum of the leakage cur-
rent of the UPS and the connected devices does not exceed 3.5mA.
1.4 Operation
zDo not disconnect the mains cable on the UPS system or the building wiring
outlet (shockproof socket outlet) during operations since this would cancel the
protective earthing of the UPS system and of all connected loads.
zThe UPS system features its own, internal current source (batteries). The UPS
output sockets or output terminals block may be electrically live even if the UPS
system is not connected to the building wiring outlet.
z In order to fully disconnect the UPS system, rst press the OFF/ ENTER button
to disconnect the mains.
z Prevent no uids or other foreign objects from inside of the UPS system.
1.5 Maintenance, Service and Faults
zThe UPS system operates with hazardous voltages. Repairs may be carried out
only by qualied maintenance personnel.
WARNING:
Risk of electric shock. Even after the unit is disconnected from the mains
(building wiring outlet), components inside the UPS system are still
connected to the battery and electrically live and dangerous.
z Before carrying out any kind of service and/ or maintenance, disconnect the bat-
teries and verify that no current is present and no hazardous voltage exists in
the terminals of high capability capacitor such as BUS-capacitors.
zOnly persons are adequately familiar with batteries and with the required pre-
cautionary measures may replace batteries and supervise operations. Unauthor-
ized persons must be kept well away from the batteries.
WARNING:
Risk of electric shock. The battery circuit is not isolated from the input
voltage. Hazardous voltages may occur between the battery terminals and
the ground. Before touching, please verify that no voltage is present!
3
Amplon INX Series
zBatteries may cause electric shock and have a high short-circuit current. Please
take the precautionary measures specied below and any other measures nec-
essary when working with batteries:
- remove wristwatches, rings and other metal objects
- use only tools with insulated grips and handles.
zWhen changing batteries, install the same number and same type of batteries.
zDo not attempt to dispose of batteries by burning them. This could cause battery
explosion.
z Do not open or destroy batteries. Escaping electrolyte can cause injury to the
skin and eyes. It may be toxic.
zPlease replace the fuse only with the same type and amperage in order to avoid
re hazards.
zDo not dismantle the UPS system.
1.6 Packing List
123
4
5
6
7
No. Item Q’ty
1UPS 1 PC
2User manual 1 PC
3Battery cable 1 PC
4Input cable (1kVA / 2kVA) 1 PC
5Input cable (3kVA) 1 PC
6USB cable 1 PC
7Screws and nuts 2 Sets
Chapter 2 Installation and Setup
4
Chapter 2 : Installation and Setup
NOTE :
Before installation, please inspect the unit. Be sure that nothing inside the
package is damaged. Please keep the original package in a safe place for
future use.
2.1 Rear Panel View
1 kVA 2 kVA
3 kVA
No. Item
1AC input
2Remote emergency power o port
3USB port
4RS-232 port
5Mini slot
6Programmable output socket
7Output socket
8External battery connector
9Input circuit breaker
5
Amplon INX Series
2.2 Setup the UPS
Before installing the UPS, please read below to select proper location to install
UPS.
1.UPS should be placed on the at and clean surface. Place it in an area away
from vibration, dust, humidity, high temperature, ammable liquids, gases,
corrosive and conductive contaminants. Install the UPS indoors in a clean
environment, where it is away from window and door. Maintain minimum
clearance of 100mm in the bottom of the UPS to avoid dust and high
temperature.
2.Maintain an ambient temperature range of 0ºC to 45ºC for UPS optimal
operation. For every 5ºC above 45ºC, the UPS will derate 12% of nominal
capacity at full load. The highest working temperature requirement for UPS
operation is 50ºC.
3.It’s required to maintain maximum altitude of 1000m to keep UPS normal
operation at full load UPS. If it’s used in high altitude area, please reduce
connected load. Altitude derating power with connected loads for UPS normal
operation is listed as below:
Chapter 2 Installation and Setup
6
4.Place UPS:
It’s equipped with fan for cooling. Therefore, place
the UPS in a well-ventilated area. It’s required to
maintain minimum clearance of 100mm in the front
of the UPS and 300mm in the back and two sides of
the UPS for heat dissipation and easy-maintenance.
5.Connect to External Battery Pack
When connecting external battery packs, please be sure to connect polarity
correctly. Connect positive pole of battery pack to positive pole of external
battery connector in UPS and negative pole of battery pack to negative pole
of external battery connector in UPS. Polarity misconnection will cause UPS
internal fault. It’s recommended to add one breaker between positive pole of
battery pack and positive pole of external battery connector in UPS to prevent
damage to battery packs from internal fault.
The required specication of breaker: voltage ≥ 1.25 x battery voltage/set;
current ≥ 50A
Please choose battery size and connected numbers according to backup
time requirement and UPS specications. To extend battery lifecycle, it’s
recommended to use them in the temperature range of 15ºC to 25ºC.
IS16242(Part)/
IEC 62 040-1
R -41076538
www.b is.gov.in
THOMASSAMUEL THOMASSAMUEL
7
Amplon INX Series
Step 1: Connect battery wires
Please connect external batteries to the UPS as
right chart.
Please refer to below chart to secure battery cable
to the terminal with supplied screws and nuts.
Step 2: UPS input connection
Plug the UPS into a two-pole, three-wire, grounded receptacle only. Avoid using
extension cords.
zFor input-socket type, the power cord is supplied in the UPS package. For
the type of power cord, please refer to the table below.
UPS Type of Power Cord
1kVA Plug 16A INDIA
2kVA Plug 16A INDIA
zFor input-terminal type, please follow below steps for the wiring conguration
1. Remove the small cover of the terminal block.
2. Suggest using AWG14 or 2.1 mm2power cords.
3. Upon completion of the wiring conguration, please check whether the
wires are securely axed.
4. Put the small cover back to the rear panel.
+
-
TO EXTERNAL BATTERY
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali Delta UPS
Delta
Delta Amplon Series Manuale utente
Delta
Delta Agilon VX Series Guida utente
Delta
Delta N-6K Manuale utente
Delta
Delta 1KVA Manuale utente
Delta
Delta Modulon DPH series Manuale utente
Delta
Delta Amplon Series Manuale utente
Delta
Delta Ultron HPH series Manuale utente
Delta
Delta VX Series Manuale utente
Delta
Delta Ultron GES203HH33A035 Manuale utente
Delta
Delta Modulon DPH series Manuale utente
Delta
Delta Modulon DPH series Manuale utente
Delta
Delta Amplon RT Series Manuale utente
Delta
Delta ups302R2002N035 Istruzioni operative originali
Delta
Delta Amplon RT Series Manuale utente
Delta
Delta Modulon DPH series Manuale utente
Delta
Delta UPS602N2004N035 Manuale utente
Delta
Delta Amplon RX series Manuale utente
Delta
Delta DPH series Manuale utente
Delta
Delta Ultron HPH series Manuale utente
Delta
Delta Ultron HPH series Manuale utente
Manuali UPS popolari di altre marche
Pylontech
Pylontech Victron & Pylontech US5000 Manuale utente
Tecnoware
Tecnoware EVO DSP PLUS MM 6.8 Manuale utente
Mecer
Mecer ME-1000-WTU Manuale utente
Mustek
Mustek PowerMust 530(B) Plus Manuale di installazione e funzionamento
Emerson
Emerson Liebert NXL series Manuale utente
MAKELSAN
MAKELSAN BOXER SERIES Manuale utente
