DeltaPix Modus M28Z Manuale utente

Modus M28Z

Table version

User Manual

Revision 1

Page 2Modus M28Z Table English Rev 1

Table of Contents

Package Contents........................................................................3

Installation ....................................................................................4

Cabling..................................................................................... 4

Height Adjustment.....................................................................4

Light Adjustment.......................................................................5

Foot Switch...............................................................................5

Controls.......................................................................................5

Power .......................................................................................5

Capture ....................................................................................5

Magnification............................................................................6

Magnification level OSD............................................................6

Overview...................................................................................6

Brightness ................................................................................6

Factory defaults ........................................................................6

Main Menu Controls .................................................................... 7

The following menu options are available.....................................7

External Keypad control of Main Menu.....................................9

Troubleshooting..........................................................................10

Changing the Output Frame Rate...........................................10

Taking Care of your Modus M28Z..............................................10

Firmware Upgrade ....................................................................11

Specifications ............................................................................ 12

Declaration of Conformity...........................................................12

Warranty.....................................................................................13

Page 3Modus M28Z Table English Rev 1

Package Contents

Your Modus M28Z package contains:

Modus M28Z Camera and Table

Power Supply

HDMI to HDMI Cable

Operation Manual

Grounding Cable

USB Memory Stick

Optional

External Keypad KP1

Foot Switch

Please retain the packaging in case there is a need to return the

unit for service or repair.

Page 4Modus M28Z Table English Rev 1

Installation

Cabling

Plug the power supply into a mains socket. Plug the power lead from the power supply into the

Modus M28Z, at the rear of the unit as shown below.

Plug the HDMI cable into the Modus M28Z and the other end into your HDMI compatible monitor.

Plug the external keypad (optional) into the Mini-Din socket.

Plug the footswitch (optional) into the footswitch jack at the base of the unit.

Modus M28Z Table side-view

Modus M28Z Table rear view

Height Adjustment

Manoeuvre the camera head to the correct height above the table dictated by the focal length of

the Lens used. Lock the position by tightening the two knobs at the side of the unit.

Page 5Modus M28Z Table English Rev 1

+4 Lens requires a distance of around 250mm between lens and table.

+5 Lens requires a distance of around 200mm between lens and table.

Light Adjustment

The light can be rotated as shown. It should be adjusted so that it shines on an area centred

about the camera’s image.

Foot Switch

A footswitch is available for the Modus M28Z Table. This allows control of the zoom functions.

The left pedal will zoom in and the right will zoom out. This is useful for hands free operation of

the zoom function.

To use the footswitch simply plug the jack into the footswitch socket at the bottom rear of the unit.

See diagram on previous page for location of foot switch socket.

Controls

Power

Push the power button to turn the unit on. A blue image will appear on your screen and after a few

seconds the picture from the camera will appear. If not, use your monitor’s remote control or

control panel to switch to the appropriate input used for the Modus M28Z. Pushing the Power

button again will power off the Modus M28Z.

Capture

To use this feature, insert a USB Key into the USB port.

When the system has detected the key it will report “USB Key Ready”

Page 6Modus M28Z Table English Rev 1

When you have an image you want to capture, simply press the capture button.

The system will indicate the image is being saved to the drive and when done.

The image is saved as a 1920 x 1080 bitmap ( BMP ) format.

The image name is Date and Time stamped and saved in this format

“IMG-DateTime.bmp”

Remove the USB Key and use a PC to view the saved images.

NB: The USB Key must be in FAT File System Format. It will not work with any other format.

Magnification

Press the Zoom-Up button to enlarge the image and Zoom-Down to reduce the image size. The

unit will make a sound to indicate when it has reached maximum or minimum zoom limits.

Magnification level OSD

The current magnification level is displayed for example “x30“ to show a magnification level of 30.

When the magnification changes from optical to digital zoom a ‘d’ is also displayed “x60d” to

indicate a magnification level of 60 and in digital zoom..

Overview

Overview allows you to easily locate a point of interest on the object you are viewing. Press and

release the Overview button to make the camera zoom out fully and revert to full-colour mode. A

cross is displayed in the centre of the screen as an aid to location. Place the point of interest

under the cross and press any key to restore the magnification to the previous level.

Brightness

The image brightness can be adjusted to suit your preference. Brightness adjustment is available

by pressing and holding the Capture button (you should hear a beep). Next use the Zoom Up and

Zoom Down buttons to adjust the image brightness as desired. Press the Capture button again

to save the setting and exit edit mode. The setting you choose will be saved and used

subsequently for that mode of operation.

Factory defaults

Press Capture while powering-on the Modus M28Z to restore factory settings for sound, lighting,

brightness settings and video frame rate.

The factory default settings are lights on, sound on and the frame rate that was set for your

country before shipping.

Page 7Modus M28Z Table English Rev 1

Main Menu Controls

To access the Main Menu press and hold the Overview button for 3 seconds.

The Menu will appear on the top of the screen including the menu navigational controls.

To Exit the menu at any time simply press the overview button.

The following menu options are available.

Sound : On / Off

Enable or disable the system sound.

Light : On / Off

Enable or disable the LED Lighting.

Crosshair : On / Off

Enable or Disable the two artificially generated lines that appear on the screen in both the

horizontal and vertical directions which intersect at the centre of the screen.

Crosshair : Long / Short

Select the Crosshair size –Short or Long.

Cross Col : White / Green / Blue / Red/ Yellow / Purple / Cyan

Select the crosshair colour.

Bright : Levels 0 –14

The image brightness can be adjusted to suit your preference.

White Bal : On / Off

White balance refers to the process of making sure whites appear as white in your

images. This will help eliminate colour casts that come from various light sources -- the

sun, incandescent bulbs and florescent bulbs.

Put a white object under the camera (Half the image minimum) and turn the white balance

on.

To re-balance later –turn the white balance off and on again

* Note :- The White Balance Data is lost when the unit is powered down.

Focus Lock : On / Off

Page 8Modus M28Z Table English Rev 1

Turning the Focus Lock On will turn off the autofocus facility and lock the focus at the

current setting. Turning the Focus Lock Off will re-enable autofocus.

InfraRed : On / Off

Normally the system filters out Infrared light.

Turning the Infrared On allows this spectrum of light to pass through to the camera.

When the Infrared mode is turned on the image becomes black and white.

Cam WDR : Off / WD / VE

The Wide Dynamic Range mode is a function for dividing an image into several blocks and

correcting blocked-up shadows and blown-out highlights in accordance with the intensity

difference.

It enables you to view images with large intensity differences.

WD –Images with Wide Dynamic Range are re-produced by combining long- exposure

signals with high-intensity signals obtained with short exposure.

VE –Using the Visibility Enhancer function will make the darker part of a camera image

brighter as well as automatically correct brightness and contrast to show parts clearly

without overexposure.

Pick the option which shows the best results in your application.

Noise R: 0 –5

The Noise Reduction function removes noise to provide clearer images.

Screen Size: 7 –100

Enter the size of your display in inches (Measured Diagonally). This size is used to

calculate the magnification levels.

Lense Diopter : 1 –15

Enter the Lense Diopter number of the lense used.

Show OSD : On / Off

Turning the OSD Screen Display ( OSD ) off removes all the static messages from the

screen.

Time : xx:xx

Enter the current time starting with minutes and then hours.

Note:- Time and Date are only used to Date Stamp the captured images.

Page 9Modus M28Z Table English Rev 1

Date : xx/xx/xxxx

Enter the current date starting with day, month and then the year.

Note:- Time and Date are only used to Date Stamp the captured images.

Rev : xxxxxxxxxx

Displays the revision of the system. This may be required for support issues.

External Keypad control of Main Menu

If you are using the optional external keypad KP1, it’s Zoom Up and Zoom Down buttons can be

used instead of the Up and Down arrow on the front keypad.

The external keypad Focus key can be used instead of the Capture button on the front panel.

The Capture button can be used to Exit the menu.

Changing the Camera Macro Lens

The Modus M28Z is shipped with a Ø52mm lens with a focal length of 250 mm (+4 Dioptre). It is

threaded into the camera using an adaptor which has a 46mm thread size on one side and a

52mm on the other side.

The lens can be replaced by a Ø52mm lens using the existing adaptor or by a 46mm lens which

requires removing the adaptor and threading directly to the camera.

Note that a lens with a decreased focal length may require the Modus M28Z to be adjusted lower

to remain within focal range and vice versa for a higher focal length lens.

Page 10 Modus M28Z Table English Rev 1

Troubleshooting

Changing the Output Frame Rate

Most monitors and HD televisions can display the many different standards of HD signals,

however some cannot. If your monitor/TV does not display the image from the Modus M28Z you

should try the following: Power-off the Modus M28Z, press and hold the Overview button and

power on the unit. This will change the unit from 50 Hz mode to 60 Hz or vice versa. You will hear

a sequence of beeps confirming the frequency change.

Taking Care of your Modus M28Z

Do not touch the lens. Dirt on the lens will appear as a blurred or dim image or as fuzzy spots on

the screen. If you believe the lens is dirty, it can be cleaned with a soft, dry cloth applying minimal

pressure. As the lens is polished and coated, do not use a wet or coarse cloth; avoid detergents

and abrasive substances or solvents to clean it.

WARNING: Never look directly at the LED light source for any prolonged period of time.

If the hinges loosen with use they can be tightened with the Allen key provided. To do this, insert

the Allen key into the screw head. Turn each screw clockwise about a quarter turn. Do not over-

tighten.

Use only the supplied power supply and inspect the cabling

regularly for damage.

Indice

Manuali Telecamera per documenti popolari di altre marche

AVer

AVer AVerVision F35 Manuale utente

Lumens

Lumens PS760 Manuale utente

Genee World

Genee World GV8100 Manuale utente

Touchboards

Touchboards Vidifox DV 480 Manuale utente

Dukane

Dukane 210 Manuale utente

TTS

TTS Easi-View Pro Manuale utente

Lumens

Lumens dc153 Manuale utente

Avermedia

Avermedia AVerVision SPB350 Manuale utente

AVer

AVer TR311V2 Manuale utente

Inswan

Inswan INS-3 Manuale utente

Genee

Genee Vision 6100 Manuale utente

Rolls

Rolls DB14 - 02/10 Manuale utente

Lumens

Lumens DC-W80 Manuale utente

AVer

AVer AVerVision SPB350+ Manuale utente

Dukane

Dukane FASTFAX AV-P750U Manuale utente

Optoma

Optoma DC554 Manuale utente

Ipevo

Ipevo Ziggi Manuale utente

Vidifox

Vidifox PV 380 Manuale utente