Dennerle Trocal LED Control Manuale utente

Quick start:

Trocal LED Control & GHL Control

Center

Please install the latest version of the software "GHL Control Center" on your PC

Https://www.aquariumcomputer.com/de/downloads

The GHL Control Center, hereinafter mentioned as GCC, assists you in the convenient programming

of your LED control. The GCC allows among other things the backup and restore of individually

created illumination curves and device settings. Please note that some functions mapped in GCC may

not work with the device due to the limitations of the display and conversely device-specific

functions such as the time-lapse function can only be set on the device itself.

Quick start:

Trocal LED Control & GHL Control Center

Page 2of 5

1. How to connect the Trocal LED control

Connect the power adapter of a "Trocal LED" with the LED Control by means of the cable “LED Connect"

and connect it to a power outlet. You can now establish a connection to the PC via the included USB

cable.

Note: The DENNERLE Trocal LED control can only be programmed with the PC software "GHL Control

Center (GCC)" if the device has at first been connected to the PC via the USB connector and before

opening the application.

1.1 Now open the GHL Control Center

1.2 When first opening the GCC, the following error

message appears: "Connection failed. Would

you like to check settings now?” Choose “Yes” in

the Popup

1.3 In order to connect the DENNERLE Trocal LED

Control automatically with the GCC after

program start, please activate the check box in

the line "Dennerle Trocal LED control" and

"Establish standard connection automatically

after program start"

Confirm with “Close”:

1.4 You can now connect the DENNERLE Trocal LED

Control with the software by double-clicking on it

in the side bar.

Please note: These steps are only necessary the first time you are establishing a connection. The next

time the program is started, the connection between the DENNERLE Trocal LED Control and GHL Control

Center will be established automatically.

Quick start:

Trocal LED Control & GHL Control Center

Page 3of 5

2. Illumination

In the GCC , up to 2 Tocal LED lights, each with 2 separate channels (i.e. a total of 4 channels) can be

programmed independently of each other.

Channel 1 and 3: Warm white; 4,000 K - Channel 2 and 4: Cool White; 6,500 K

2.1 In the sidebar, select an “illumination

channel”.

In the following window up to 8 dimming

points can be set.

2.2 Select and then enter your

desired time and brightness in the

window.

Confirm with

Note: The brightness at the start point

and end point of the illumination run

must always be set to 0%!

2.3 Repeat step 2.2 until the illumination run

corresponds to your wishes.

Tip: For a moon light setting select the

colder illumination channel 2 or 4.

2.4 To save the illumination run, click

in the menu.

The illumination run is then transmitted

to the device.

2.5 Repeat steps 2.1 to 2.4 for the other

illumination channel(s).

Tip: If you are not sure what the optimum illumination run for your aquarium should be, you can find

some examples in the instructions manual of the DENNERLE Trocal LED Control. In the graphical

representation of the illumination curve, it is possible to change the previously programmed

illumination points comfortably with the mouse pointer. Please note that changes only take effect

after saving.

Quick start:

Trocal LED Control & GHL Control Center

Page 4of 5

3. Acclimation

The function "acclimation" offers a simple and convenient way to adapt the intensity of the

illumination automatically over several days. This is especially important for the plants in order to get

accustomed to the new and often much stronger light. Also newly added animal residents (fish, corals

etc.) benefit from a gentle increase of the light intensity.

3.1 In the sidebar, select “Acclimation”.

3.2 In order to enable the acclimation, select the

check box .

3.3 Select a start date. The acclimation starts

immediately and runs with the set value.

3.4 Select an end date. The acclimation ends on this

day.

3.5 Click on to save the acclimation

run.

The settings you made are transferred to the

device.

Quick start:

Trocal LED Control & GHL Control Center

Page 5of 5

4. Simulation

Under this menu item you can set the period of the active moon phase simulation. This moon phase

simulation does not "create" any moonlight, it influences the curve for the moonlight programmed in

the illumination channel. The moonlight now corresponds to the current natural moon phases.

Accordingly, at new moon e.g., no moonlight can be identified.

4.1 In the sidebar, select “Simulation”.

4.2 Select the start time and the end time in

which the moon phase simulation should

be active.

Ideally, this period of time corresponds to

the setting curve for the moonlight in the

illumination run.

4.3 To save the moonlight run, click

in the menu.

The settings made are transferred to the

device.

4.4 For activating the moonlight you must

select the check box “Depends on moon

phase” in the corresponding illumination

channel.

Indice

Altri manuali Dennerle Acquario

Dennerle

Dennerle Nano Cube 10 L Manuale utente

Dennerle

Dennerle Nano ThermoCompact Series Manuale utente

Dennerle

Dennerle Profi Series Manuale utente

Dennerle

Dennerle Nano Cube 10 Manuale utente

Dennerle

Dennerle Eco-Line ThermoTronic Manuale utente

Dennerle

Dennerle Profi-Line Evolution DeLuxe Manuale utente

Dennerle

Dennerle Profi-Line Evolution DeLuxe Manuale utente

Dennerle

Dennerle Boden-Fluter Manuale utente

Dennerle

Dennerle Nano External SkimFilter Manuale utente

Dennerle

Dennerle Reusable 160 Primus / Special Edition Manuale utente

Dennerle

Dennerle Nano Manuale utente

Dennerle

Dennerle Nano corner filter XXL Manuale utente

Dennerle

Dennerle Scaper’s Tank Manuale utente

Dennerle

Dennerle NANO CUBE Guida di sicurezza

Dennerle

Dennerle Profi-Line CO2 pH electrode Manuale utente

Dennerle

Dennerle TR7 Tropic Manuale utente

Dennerle

Dennerle CarboNIGHT M400 Manuale utente

Dennerle

Dennerle Scaper's Tank Manuale utente

Dennerle

Dennerle Corner Filter 40 Manuale utente

Dennerle

Dennerle Scaper's Flow Manuale utente

Dennerle

Dennerle CarboPOWER E400 Manuale utente

Dennerle

Dennerle Nano Cube 10 Manuale utente

Manuali Acquario popolari di altre marche

AquaLighter

AquaLighter Aquascape Manuale utente

EHEIM

EHEIM 600 T Manuale utente

Red Sea

Red Sea REEFER XL300 Manuale utente

AutoAqua

AutoAqua Smart Stir SS-100 Manuale utente

eKoral

eKoral eKoral Pro Manuale utente

fish mate

fish mate F14 Manuale utente

JBL

JBL PRO SILENT S-100 Manuale utente

Amtra

Amtra VEGA Manuale utente

JBL

JBL CRISTALPROFI i60 greenline Manuale utente

Aquatlantis

Aquatlantis Tecatlantis EASY LED UNIVERSAL 2.0 Manuale utente

Innovative Marine

Innovative Marine MightyJet 8500 Mini Istruzioni operative

SuperFish

SuperFish Planty 25 Guida all'installazione

Royal Exclusiv

Royal Exclusiv Bubble King DeLuxe 300 Manuale utente

Sera

Sera Marin Precision Biotop LED Cube 130 Manuale utente

Commodity Axis

Commodity Axis ViaAqua Titanium Heater Manuale utente

Sander

Sander Ozonizer P 2000 Manuale utente

Hagen

Hagen HALF MOON Manuale utente

CPR

CPR CS150 Manuale utente