Denon HEOS Amp HS2 Manuale utente

MODEL JP E3 E2 EK EA E1 E1K E1C

HEOS Amp HS2

P P

Wireless Amplier

Ver. 3

S0250V03DM/DG1804

• Please use this service manual with referring to the operating instructions without fail.

• Some illustrations using in this service manual are slightly different from the actual set.

• For purposes of improvement, specications and design are subject to change without notice.

Please refer to the

MODIFICATION NOTICE.

WARNING: Violators will be prosecuted to the maximum extent possible.

SERVICE MANUAL

D&M Holdings Inc.

ABOUT THIS MANUAL.............................................................3

What you can do with this manual ............................................3

Using Adobe Reader (Windows version) ..................................4

SAFETY PRECAUTIONS ..........................................................6

NOTE FOR SCHEMATIC DIAGRAM.........................................7

NOTE FOR PARTS LIST ...........................................................7

TECHNICAL SPECIFICATIONS................................................9

DIMENSION ...............................................................................9

DISASSEMBLY ........................................................................10

1. SIDE COVER .....................................................................12

2. TOP COVER ......................................................................13

3. BOTTOM COVER ..............................................................13

4. FRONT COVER .................................................................14

5. DIGITAL ASSY ...................................................................14

6. MAIN ASSY........................................................................15

Procedure after Replacing the Microprocessor, etc. ..........16

Firmware Update Procedure..................................................17

1. MAIN PCB Update Procedure............................................17

2. Updating via USB...............................................................18

3. Service region settings update procedures........................20

4. Service Release Type settings update procedures............21

5. Firmware burning procedure

after Core Module replacement ow ......................................22

6. How to check the version , Release Type, Locale .............23

TROUBLE SHOOTING............................................................24

1. POWER..............................................................................24

2. AUDIO................................................................................26

AUDIO CHECK PATH .............................................................28

MEASURING METHOD AND WAVEFORMS .........................32

BLOCK DIAGRAM...................................................................35

POWER DIAGRAM..................................................................36

WIRING DIAGRAM..................................................................37

PRINTED Circuit BOARDS.....................................................38

SCHEMATIC DIAGRAMS .......................................................40

SCH01_DIGITAL 1 .................................................................40

SCH02_DIGITAL 2 ..................................................................41

SCH03_DIGITAL 3 ..................................................................42

SCH04_DIGITAL 4 ..................................................................43

SCH05_FUNCTION & VOLUME (MAIN-1).............................44

SCH06_AMP (MAIN-2) ...........................................................45

SCH07_SIDE KEY & LED & CONNECT (MAIN-3) .................46

SCH08_SMPS (MAIN-4).........................................................47

EXPLODED VIEW ...................................................................48

PACKING VIEW .......................................................................50

SEMICONDUCTORS ...............................................................51

1. IC's .....................................................................................51

CONTENTS

Jump to the target of a schematic

diagram connector

Click the Ref. No. of the target connector in the red

box around a schematic diagram connector.

•The screen jumps to the target connector.

•Pagemagnicationstaysthesameasbeforethe

jump.

CP401

CP106

ABOUT THIS MANUAL

Read the following information before using the service manual.

What you can do with this manual

Search for a Ref. No. (phrase)

(Ctrl+Shift+F)

You can use the search function in Acrobat Reader to

search for a Ref. No. in schematic diagrams, printed

wiring board diagrams, block diagrams, and parts

lists.

1.Press Ctrl+Shift+Fonthekeyboard.

• The Search window appears.

2.EntertheRef.No.youwanttosearchforinthe

Search window, and then click the Search button.

•A list of search results appears.

3.Click an item on the list.

• The screen jumps to the page for that item, and the

searchphraseisdisplayed.

Ctrl

Shift

Using Adobe Reader (Windows version)

• Properties

Click this button and check that the printer is set to a

suitable paper size.

• Page to print

Select the following checkbox.

"More Options" : "Current View"

• Page Sizing & Handling

Select the following checkbox.

"Size" / "Size Options" : "Fit"

Add notes to this data (Sign)

TheSignfunctionletsyouaddnotestothedatain

this manual.

Savetheleonceyouhavenishedaddingnotes.

[Example using Adobe Reader X]

On the "View" menu, click "Sign".

• The Sign pane appears.

[Example using Adobe Reader 9]

On the "Document" menu, click "Sign".

Magnify schematic / printed wiring

board diagrams - 1

(Ctrl+Space, mouse operation)

Press Ctrl+Spaceonthekeyboardanddragthe

mousetoselecttheareayouwanttoview.

• Theselectedareaismagnied.

• Whenyouwanttomovetheareashown,hold

down Space and drag the mouse.

• Whenyouwanttoshowafullpageview,press

Ctrl+0onthekeyboard.

Ctrl Space

Print a magnied part of the manual

ThePropertiesdialogboxandfunctionswillvarydependingonyourprinter.

1. Dragthemousetomagnifythepartyouwanttoprint.

2. On the "File" menu, click "Print".

3. CongurethefollowingsettingsinthePrintdialogbox.

4. Click the Print button to start printing.

Magnify schematic / printed wiring

board diagrams - 2

(Pan & Zoom function)

ThePan&Zoomfunctionletsyouseewhichpartof

amagnieddiagramisbeingshowninaseparate

window.

[Example using Adobe Reader X]

On the "View" menu, point to "Zoom", and then click

"Pan & Zoom".

• The Pan & Zoom window appears on the screen.

[Example using Adobe Reader 9]

On the "Tools" menu, point to "Select & Zoom", and

then click "Pan & Zoom Window".

Magnify schematic / printed wiring

board diagrams - 3

(Loupe Tool function)

TheLoupeToolfunctionletsyoumagnifyaspecic

part of a diagram in a separate window.

[Example using Adobe Reader X]

On the "View" menu, point to "Zoom", and then click

"Loupe Tool".

• The Loupe Tool window appears on the screen.

[Example using Adobe Reader 9]

On the "Tools" menu, point to "Select & Zoom", and

then click "Loupe Tool Window".

SAFETY PRECAUTIONS

The following items should be checked for continued protection of the customer and the service technician.

leakage current check

Beforereturningthesettothecustomer,besuretocarryouteither(1)aleakagecurrentcheckor(2)alinetochassis

resistance check. If the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the

power cord is less than 460 kohms, the set is defective.

Be sure to test for leakage current with the AC plug in both polarities, in addition, when the set's power is in each state

(on,offandstandbymode),ifapplicable.

CAUTION Please heed the following cautions and instructions during servicing and

inspection.

◎Heed the cautions!

Cautions which are delicate in particular for servicing

are labeled on the cabinets, the parts and the chassis,

etc. Be sure to heed these cautions and the cautions

described in the handling instructions.

◎Cautions concerning electric shock!

(1) AnACvoltageisimpressedonthisset,soifyou

touch internal metal parts when the set is energized,

youmaygetanelectricshock.Avoidgettingan

electricshock,byusinganisolatingtransformer

and wearing gloves when servicing while the set is

energized,orbyunpluggingthepowercordwhen

replacing parts, for example.

(2) Therearehighvoltagepartsinside.Handlewith

extra care when the set is energized.

◎Caution concerning disassembly and

assembly!

Through great care is taken when parts were

manufacturedfromsheetmetal,theremaybeburrson

theedgesofparts.Theburrscouldcauseinjuryifngers

are moved across them in some rare cases. Wear gloves

toprotectyourhands.

◎Use only designated parts!

Theset'spartshavespecicsafetyproperties(re

resistance,voltageresistance,etc.).Besuretouseparts

which have the same properties for replacement. The

burrs have the same properties. In particular, for the

importantsafetypartsthatareindicatedbythezmark

on schematic diagrams and parts lists, be sure to use

the designated parts.

◎Be sure to mount parts and arrange the wires

as they were originally placed!

Forsafetyseasons,somepartsusetapes,tubesorother

insulatingmaterials,andsomepartsaremountedaway

from the surface of printed circuit boards. Care is also

takenwiththepositionsofthewiresbyarrangingthem

andusingclampstokeepthemawayfromheatingand

highvoltageparts,sobesuretoseteverythingbackas

itwasoriginallyplaced.

◎Make a safety check after servicing!

Check that all screws, parts and wires removed or

disconnected when servicing have been put back in their

original positions, check that no serviced parts have

deteriorate the area around. Then make an insulation

check on the external metal connectors and between

the blades of the power plug, and otherwise check that

safetyisensured.

(Insulationcheckprocedure)

Unplug the power cord from the power outlet, disconnect

the antenna, plugs, etc., and on the power. Using a 500V

insulation resistance tester, check that the insulation

resistancevaluebetweentheinplugandtheexternally

exposedmetalparts(antennaterminal,headphones

terminal,inputterminal,etc.)is1MΩorgreater.Ifitis

less, the set must be inspected and repaired.

Manyoftheelectricandthestructuralpartsusedinthe

sethavespecialsafetyproperties.Inmostcasesthese

propertiesaredifculttodistinguishbysight,andtheuse

ofreplacementpartswithhigherratings(ratedpower

andwithstandvoltage)doesnotnecessarilyguarantee

thatsafetyperformancewillbepreserved.Partswith

safetypropertiesareindicatedasshownbelowonthe

wiring diagrams and the parts list in this service manual.

Be sure to replace them with the parts which have the

designated part number.

(1) Schematicdiagrams.......Indicatedbythez mark.

(2) Partslists.......Indicatedbythezmark.

The use of parts other than the

designated parts could cause electric

shocks,resorotherdangerous

situations.

CAUTION Concerning important

safety parts

NOTE FOR SCHEMATIC DIAGRAM

WARNING:

Partsindicatedbythezmarkhavecriticalcharacteristics.UseONLYreplacementpartsrecommendedbythemanufacturer.

CAUTION:

Beforereturningthesettothecustomer,besuretocarryouteither(1)aleakagecurrentcheckor(2)alinetochassisresistancecheck.If

the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the power cord is less than 460 kohms, the set

is defective.

WARNING:

DONOTreturnthesettothecustomerunlesstheproblemisidentiedandremedied.

NOTICE:

ALLRESISTANCEVALUESINOHM.k=1,000OHM/M=1,000,000OHM

ALLCAPACITANCEVALUESAREEXPRESSEDINMICROFARAD,UNLESSOTHERWISEINDICATED.PINDICATESMICRO-MICRO

FARAD.EACHVOLTAGEANDCURRENTAREMEASUREDATNOSIGNALINPUTCONDITION.CIRCUITANDPARTSARESUBJECT

TOCHANGEWITHOUTPRIORNOTICE.

NOTE FOR PARTS LIST

1.Partsindicatedby"nsp"onthistablecannotbesupplied.

2.Whenorderingapart,makeacleardistinctionbetween"1"and"I"(i)toavoidmis-supplying.

3.Apartorderedwithoutspecifyingitspartnumbercannotbesupplied.

4.Partindicatedby" ★" mark is not illustrated in the exploded view.

WARNING: Partsindicatedbythezmarkhavecriticalcharacteristics.UseONLYreplacementpartsrecommendedbythe

manufacturer.

INSTRUCTIONS FOR HANDLING SEMI-CONDUCTORS AND OPTICAL UNIT

Electrostaticbreakdownofthesemi-conductorsoropticalpickupmayoccurduetoapotentialdifferencecausedby

electrostatic charge during unpacking or repair work.

1. GroundforHumanBody

Besuretowearagroundingband(1MΩ)thatisproperlygroundedtoremoveanystaticelectricitythatmaybe

chargedonthebody.

2. GroundforWorkbench

Besuretoplaceaconductivesheetorcopperplatewithpropergrounding(1MΩ)ontheworkbenchorothersurface,

wherethesemi-conductorsaretobeplaced.Becausethestaticelectricitychargeonclothingwillnotescapethrough

thebodygroundingband,becarefultoavoidcontactingsemi-conductorswithyourclothing

CBA

Grounding Band

Conductive Sheet or

Copper Plate

1MΩ

CBA

Personal notes:

nAudio section

Power amplifier Rated output : 2-channel driving

100W+100W (6Ω, 1 kHz, T.H.D. 0.7%)

Output connectors : 4 - 16 Ω/ohms

THD+N : ANALOG IN: 0.5 %(1 kHz)

S/N ratio (10 W, 6 Ω/ohms, IHF-A) : ANALOG IN: 83 dB(IHF-A weighted)

Frequency response : 10 Hz to 40 kHz : +1, -3 dB

nWireless LAN section

Network type : Conforming to IEEE 802.11a/b/g/n/ac

Used frequency range : 2.4 GHz, 5 GHz

nGeneral

Operating temperature : 41°F-95°F (5°C - 35°C)

Power supply : AC 120V, 60Hz (for North America)

AC 220-240V, 50/60Hz (for Europe)

Power consumption: 60W

Power consumption in Quick Start Mode : 4.5W

Power consumption in Deep Standby mode : 0.3W

TECHNICAL SPECIFICATIONS

DIMENSION

oDimensions (Unit : in. (mm))

6 3/16 (157)

8 45/64 (221)

15/64

(6) 3 27/64 (87)

3 21/32 (93)

8 5/16 (211)

8 27/64 (214)

1 31/32 (50) 4 3/8 (111)

DENON

oWeight : 6 lbs 2.8 oz (2.8 kg)

For the purpose of improvement, the specifications and design are subject to change without notice.

Contents Setup Use Troubleshooting Status LED Appendix

Unit : in. (mm)

Weight : 6 lbs 3 oz (2.8 kg)

DISASSEMBLY

• Removeeachpartfollowingtheowbelow.

• Reassembletheremovedpartsinthereverseorder.

• Read"SAFETY PRECAUTIONS"beforereassemblingtheremovedparts.

• Ifwirebundlesareremovedormovedduringadjustmentorpartreplacement,reshapethewiresaftercompleting

thework.Failuretoshapethewirescorrectlymaycauseproblemssuchasnoise.

SIDE COVER

See "DISASSEMBLY

1. SIDE COVER"

and"EXPLODED VIEW"

ORNAMENT,SIDELASS'Y

(Ref.No.ofEXPLODEDVIEW:P4)

ORNAMENT,SIDERASS'Y

(Ref.No.ofEXPLODEDVIEW:P5)

SIDEKEYPCB

(Ref.No.ofEXPLODEDVIEW:C4)

TOP COVER

See "DISASSEMBLY

2. TOP COVER"

and"EXPLODED VIEW"

TOPCOVERASSY

(Ref.No.ofEXPLODEDVIEW:P3)

BOTTOM COVER

See "DISASSEMBLY

3. BOTTOM COVER"

and"EXPLODED VIEW"

COVER,BOTTOMASS'Y

(Ref.No.ofEXPLODEDVIEW:P2)

FRONT COVER

See "DISASSEMBLY

4. FRONT COVER"

and"EXPLODED VIEW"

FRONTPANELHEOSAMP

(Ref.No.ofEXPLODEDVIEW:P1)

FRONTLEDPCB

(Ref.No.ofEXPLODEDVIEW:C6)

DIGITAL ASSY

See "DISASSEMBLY

5. DIGITAL ASSY"

and"EXPLODED VIEW"

CONNECTPCB

(Ref.No.ofEXPLODEDVIEW:C3)

DIGITALPCB

(Ref.No.ofEXPLODEDVIEW:C7)

MODULE,AIOS4000LEGOMODULE

(Ref.No.ofEXPLODEDVIEW:C8)

MAIN ASSY

See "DISASSEMBLY

6. MAIN ASSY"

and"EXPLODED VIEW"

MAINPCB

(Ref.No.ofEXPLODEDVIEW:C1)

SMPSPCB

(Ref.No.ofEXPLODEDVIEW:C2)

DCINPCB

(Ref.No.ofEXPLODEDVIEW:C10)

REARLEDPCB

(Ref.No.ofEXPLODEDVIEW:C5)

Indice

Altri manuali Denon Amplificatore

Denon

Denon POA-A1HDCI Manuale utente

Denon

Denon PMA-2010AE Manuale utente

Denon

Denon PMA-1600NE Manuale utente

Denon

Denon PMA-50 Manuale utente

Denon

Denon AVR-1705 Manuale utente

Denon

Denon PMA-1510AE Manuale utente

Denon

Denon PMA-300V Manuale utente

Denon

Denon PMA-2020AE Manuale utente

Denon

Denon AVC-S670H Manuale utente

Denon

Denon PMA-777 Manuale utente

Denon

Denon AVC-A110 Manuale utente

Denon

Denon PMA-2500NE Manuale utente

Denon

Denon PMA-2010AE Manuale utente

Denon

Denon AVC-X6700H Manuale utente

Denon

Denon PMA-900HNE Manuale utente

Denon

Denon PMA-710AE Manuale utente

Denon

Denon PMA-50 Manuale utente

Denon

Denon AVC-A1H Manuale utente

Denon

Denon AVC-X6500H Manuale utente

Denon

Denon PMA-1500AE Manuale utente

Denon

Denon POA-3012CI - Multi-Zone Audio Distribution Power... Manuale utente

Denon

Denon POA-A1HDCI Guida utente

Denon

Denon AVC-A1XV Manuale utente

Denon

Denon Professional DN-A200 Manuale utente

Manuali Amplificatore popolari di altre marche

ASTRO

ASTRO HVO V40 P Manuale utente

Marantz

Marantz SUPERSCOPE BLA-545 Istruzioni per il montaggio

NAD

NAD CI980 Manuale utente

Technics

Technics SE-CH770 Manuale utente

Harman Kardon

Harman Kardon HK6300 Manuale utente

NAD

NAD T975 Manuale utente

McIntosh

McIntosh MA6850 Manuale utente

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manuale utente

Viatron

Viatron Autrix Manuale utente

GME

GME GA9800 Manuale utente

Atlas

Atlas CP700 Manuale utente

Roland

Roland KC-1000 Manuale utente

Pyle

Pyle PFMRA350BW Manuale utente

Advantage

Advantage S-250 Manuale utente

IRT Electronics

IRT Electronics DVA-3007 Manuale utente

Dimavery

Dimavery BA-100 Series Manuale utente

Sony

Sony XM-S400D Manuale utente

Schertler

Schertler ROY X Manuale utente