Denver MT-1063 Manuale utente

PORTABLE DVD

USER’S MANUAL

MT-1063

Before connecting, operating or adjusting this product,Please read

Table of Contents

Contects

Table of contents

Safety precautions

Before Use

Identification of controls

Getting Started

Basic operation

SETUP menu setting

Parameters and specifications

Troubleshooting tips

Safety Precautions

Warning: To reduce the risk of electric shock, do not remove the cover or back of

this produce. There are no use-serviceable parts inside. Refer servicing to

qualified service personnel.

Warning: To reduce the risk of fire or electric shock, do not expose this product to

dripping or splashing water, rain, or moisture. Do not place objects filled with

water such as vases, on the product.

Warning: This digital video disc player employs a laser system. Use of controls,

adjustment, or the performance of procedures other than those specified herein

may result in hazardous radiation exposure.

Warning: To prevent direct exposure to laser beam, do not open the enclosure.

Visible laser radiation when open.

Warning: Never stare directly into the laser beam.

Caution: Do not install this product in a confined space such as a book case or

similar unit.

Notes on Copyrights:

●It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public,

or rent copyrighted material without permission.

●This product features the copy protection function developed by Macrovision. Copy

protection signals are recorded on some discs. When recording and playing the pictures

of these disc picture noise will appear. This product incorporates copyright protection

technology that is protected by method claims of certain U.S.

Patents and other intellectual property rights owned by Macrovision Corporation and

other rights owners. Use of this copyright protection technology must be authorized by

Macrovision Corporation, and is intended for home and other limited viewing uses only

unless otherwise authorized by Macrovision Corporation. Reverse engineering or

disassembly is prohibited.

●SERIAL NUMBER:

You can find the serial number on the back of the unit. This number is unique to this unit

and not available to others. You should record requested information here an retain this

guide as a permanent record of your purchase.

Mode No.___________________________

Serial No.___________________________

Date of purchase______________________

Before Used (Continued)

Introduction

To ensure proper use of this product, please read this owner’s manual carefully and

retain for future reference.

This manual provides information on the operation and maintenance of your DVD player.

Should the unit require service, contact an authorized service location.

Symbol Used in this Manual

The lightning flash symbol alerts you to the presence of dangerous voltage within

the product enclosure that may constitute a risk of electric shock.

The exlamation point alerts you to the presence of important operating and

maintenance / servicing instructions.

Indicates hazards likely to cause harm to the unit itself or other material damage.

Note:

Indicates special notes and operating features.

Tip :

Indicates tips and hints for making the task easier. A section whose title has one of the

following symbols is applicable only to the disc represented by the symbol.

DVD and finalized DVD+R/RW

Video CDs

Audio CDs

WMA Discs

JPEG Discs

About the Symbol Display

“”may appear on your TV display during operation and indicates that the function

explained in this owner’s manual is not available on that specific DVD video disc.

Notes on Discs

Handing Discs

Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints

do not get on the surface. Never stick paper or tape on the disc.

Storing Discs

After playing, store the disc in its case. Do not expose the disc to direct sunlight or source

of heat an never leave it in a parked car exposed to direct sunlight.

Cleaning Discs

Fingerprints and dust on the disc can cause poor picture quality and sound distortion.

Before playing, clean the disc with a clean cloth. Wipe the disc from the center out.

Do not use strong solvents such as alcohol, benzine, thinner, commercially available

cleaners, or anti-static spray intended for older vinyl records.

Before Used (Continued)

Types of Playable Discs

DVD

(8cm/12cm disc)

———————————————————————————————————————

Video CD(VCD)

(8cm/12cm disc)

———————————————————————————————————————

Audio CD

(8cm/12cm disc)

In addition, this unit plays, DVD-R,DVD+R,DVD-RW, DVD+RW, Kodak Picture CDs,

SVCD, and CD-R/CD-RW that contains audio titles, WMA and JPEG files.

This indicates a product feature that is capable of playing DVD-RW discs

recorded with Video Recording format.

Notes :

1. Depending on the conditions of the recording equipment or the CD-R/RW(or

DVD-R, DVD-R,DVD+R,DVD-RW,DVD+RW) disc itself, some CD-R/RW(or DVD-

R,DVD+R,DVD-RW,DVD+RW)disc cannot be played on the unit.

2. Do not attach any seal or label to either side (the labeled side or the recorded side) of

a disc.

3. Do not use irregularly shaped CDs(e.g. Heartshaped of octagonal) since they may

result in malfunctions.

4. Some playback operations of DVDs and Video CDs may be intentionally,

programmed by software manufacturers. This uniti plays DVDs and Video CDs

according to disc content designed by the software manufacturer, therefore some

playback features may not be available or other functions may be added.

●Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and

the double-D symbol are trademarks of Dolby Laboratories.

●Region code

This DVD player is designed and manufactured for playback of region “2” encoded DVD

software. This unit can play only DVD discs labeled “2” or “All”

Notes on Region Codes

Most DVD discs have a globe with one or more numbers in it clearly visible on the

cover. This number must match your DVD player’s region code or the disc cannot play. If

you try to play a DVD with a different region code from your player, the message “check

region code” appears on the TV screen.

Indentification of Controls

Main Unit

This player is powered by a lithium-polymer battery. It features high ratio of energy to

weight. And it has no memory effect and thus it can be recharged at any time regardless

that it is fully or partially discharged. It takes about 2:30 hours to fully charge the battery.

And the fully charged battery can be used for up to two hours. Connect the attached

AC/DC adapter to the DC INPUT jack on the unit, then plug the adapter into a 110~240

AC outlet.

Note : Make sure to switch off the unit before charging.

Indentification of Controls

Remote control unit

1. POWER

2. PROGRAM

3. DVD/USB/SD

4. TIME

5. DIGIT KEYS

6. TITLE/PBC

7. SETUP

8. 16.11.13

UP/DOWN/LEFT/RIGHT

DIRECTION KEYS

9. N/P

10. FAST FORWARD

12. ENTER

14. FAST REWIND

15. MUTE

17. ZOOM

18. NEXT

19. STOP

20. PLAY/PAUSE

21. AUDIO

22. PREVIOUS

23. SLOW

24.REPEAT

25. A-B REPEAT

26. VOLUME+

27. ANGLE

28. SUBTILE

29. OSD

30. VOLUME-

Identification of Controls

Insert the battery

●Refer to the drawing, take the back cover of the remote control off and remove the

empty battery receptacle.

●Prior to shipping ,a separating film was applied to the battery. Remove this film.

●Insert the battery into the receptacle and insert the receptacle into the remote.

●For the best results, aim the remote towards at the player, receiving window. Stay within

15 feet and angles of 60 degrees or less.

●Under normal use the battery will last for one year.

●Remove battery during storage or when you are not using the DVD player for a long

time.

Note : The Remote Should Come With AAA Batteries

Getting Started

Introduction

●DVD±R/RW

DVD-R and DVD+R are two different standards for recordable DVD drives and discs.

This format allows information to be recorded onto the DVD disc only once. DVD+RW

and DVD-RW are two standards for re-writable media, meaning the DVD content can be

erased and re-recorded. Single –sided discs can hold 4.38 gigabytes and double-sided

discs hold twice as much. There are no dual layer single sided recordable discs.

●VCD (Video CD )

A VCD holds up to 74 minutes (650 MB disc) or 80 minutes (700MB disc) of MPEG-1 full-

motion video along with quality stereo sound.

●MPEG

MPEG is an international standard for video and audio compression. MPEG-1 is used in

encoding video for VCD and provides for multichannel surround sound coding such as

PCM, Dolby Digital, and MPEG audio.

●WMA

Windows media audio file. A type of coding /decoding developed by Microsoft Corp.

●JPEG

Joint Picture Expert Group. JPEG is a compressed file format that allows you to save

images with no limit on the number of colors.

Getting Started

Introduction

●Title (DVD video discs only)

A title is generally a distinct section of a DVD disc. For example the main feature could be

title 1, a documentary describing how the film was made could be title 2, and cast

interviews could be title 3. Each title is assigned a reference number enabling you to

locate it easily.

●Chapter (DVD video discs only )

A chapter is a segment of a title such as a scene in a film or one interview in a series.

Each chapter is assigned a chapter number, enabling you to locate the chapter you want.

Depending on the disc, chapters may not be recorded.

●PBC: Playback Control ( Video CD only )

Playback control is available for Video CD (VCD) version 2.0 disc formats.PBC allows

you to interact with the system via menus, search function, or other typical computer-like

operations. Moreover, still pictures of high resolution can be played if they are included in

the disc. Video CDs not equipped with PBC (Version 1.1) operate in the same way as

audio CDs.

●Track

A distinct element of audiovisual information, such as the picture or sound track for a

specific language (DVD), or a musical piece on a video or audio CD. Each track is

assigned a track number, enabling you to locate the track you want. DVD discs allow one

track of video (with multiple angles) and several tracks of Audio.

Note :

If you want to set the parameter to default value. You can go into “setup” menu and

set the “Default” option. See “set default setting”.

Getting Started

Playing a DVD or Video CD (Operation)

●Playback Setup

1. Turn on the power switch at the left side of the product.

2. Press OPEN to open the disc tray and insert your chosen disc in the tray, with the

playback side down.

3. Close the tray. Playback will start automatically.

●

Use the ▲▼◀▶buttons to select the title/chapter you want to view, then press ENTER to

start. Press MENU to return to the menu screen.

●

Use the number buttons to select the track you want to view and press MENU to return to

the menu screen. Menu settings and operating procedures may differ. Follow the

instructions on the each menu screen.

Notes :

1. If parental control is set and the disc isn’t fit for the rating setting you must input the

password.(see “parental ” on page 21).

2. DVDs may have a region code. Your player does not play discs that have a region

code different from your player.

3. Unless stated otherwise, all operations described use the remote control. Some

features may also be available on the setup menu.

●Moving to another CHAPTER/TRACK

When a title on a disc has more than one chapter or a disc has more than one track, you

can move to another chapter/track as follows:

1. Press SKIP or briefly during playback to select the next ( or previous)

chapter/track or to return to the beginning of the current chapter/track.

2. Press SKIP twice briefly to step back to the previous chapter/track.

3. To go directly to any chapter during DVD playback, input the chapter/track. Number.

●Changing the Audio Channel

Press AUDIO repeatedly during playback to hear a different audio channel ( Stereo, Left,

or Right ).

Getting Started

Playing a DVD or Video CD (Operation)

●Repeat A-B

To repeat a sequence.

1. Press A-B at your chosen starting point “ ”. Appears briefly on the TV screen.

2. Press A-B again at your chosen end point. “ ” appears briefly on the TV screen

and the repeat sequence begins.

3. Press A-B again to cancel.

Indice

Altri manuali Denver Lettore DVD portatile

Denver

Denver 12809S Manuale utente

Denver

Denver MTW-753 TWIN Manuale utente

Denver

Denver MT-902 Manuale utente

Denver

Denver MTW-751 TWIN Manuale utente

Denver

Denver MT-910 Manuale utente

Denver

Denver MT-779 Manuale utente

Denver

Denver MT-774 Manuale utente

Denver

Denver MT-983 Manuale utente

Denver

Denver X-VIEW PDVD-193D Manuale utente

Denver

Denver MT-768 Manuale utente

Denver

Denver MT-703 Manuale utente

Denver

Denver MT-723 TWIN Manuale utente

Denver

Denver MT-782 Manuale utente

Denver

Denver MT-980 Manuale utente

Denver

Denver MTW-735 TWIN Manuale utente

Denver

Denver MT-980DVBT Manuale utente

Denver

Denver MT-772 DVBT Manuale utente

Denver

Denver MTW-981 TWIN Manuale utente

Denver

Denver MT-1080T2H Manuale utente

Denver

Denver MT-1002DVBT Manuale utente

Denver

Denver MTW-727 TWIN Manuale utente

Denver

Denver MT-783 Manuale utente

Denver

Denver MTW-747 TWIN Manuale utente

Denver

Denver MTW-1085TWIN Manuale utente

Manuali Lettore DVD portatile popolari di altre marche

Philips

Philips PET718/77 Manuale utente

Impecca

Impecca DVP775 Manuale utente

NextBase

NextBase MULTI-VISION SET PRO Manuale utente

Impecca

Impecca DVP-1017 Manuale utente

Akura

Akura APDVD6008 Manuale utente

TV Star

TV Star TD3 LCD COMBO Manuale utente

LENCO

LENCO MES-202 Manuale utente

Philips

Philips PET940/98 Manuale utente

Philips

Philips PET702P Manuale utente

Philips

Philips PD7016 Manuale utente

Logik

Logik L7SPDVD11 Manuale utente

LG DP650 Manuale utente

Mustek

Mustek MVP850B Manuale utente

Insignia

Insignia NS-MDDVD10 Manuale utente

Philips

Philips PD9000/12 Manuale utente

LENCO

LENCO DVP-1027 Manuale utente

Philips

Philips PD7010/05 Manuale utente

Technika

Technika PDVDTWINSS10 Guida utente