Derrik ACD-1500 Manuale utente
Pan, Tilt and Zoom Dome Camera / ACD-1500
INSTRUCTION MANUAL Ver 1.0.2d
○
1Introduction
Features 3
Components 4
System Configuration 5
○
2Installation
Wall Mount 6
Ceiling Mount 7
Final Assembly 8
○
3Camera Addressing
Camera Address Setting 9
Protocol and Baud Rate Settings 11
○
4Advanced Features
Auto Scan 12
Camera Power 12
Back Light Compensation 12
ICR 12
Digital Zoom 13
Focus Mode 13
Iris Mode 13
White Balance Mode 13
Auto Cruise 13
○
5On Screen Display
Main Menu 14
Focus Set 15
Auto White Balance 15
Auto Exposure 16
Special Functions 16
Motion Detection 17
Function On Screen Display 17
○
6Parts Description and Function
18
○
7Product Specifications 19
2
P
an, Tilt and Zoom Dome Camera / ACD-1500
1
Introduction
Features
Camera Specification
•Sony Module 480 Lines
•.01 Lux (Night Operation)
•27X Optical Zoom
•10X Digital Zoom
•Total Zoom 270X
•3.6mm – 88mm Zoom
•Day & Night Function
•24v AC
Complete View
•360 Degree Pan, 90 Degree Tilt. For No Blind Spots
Housing
•Indoor / Outdoor use, Weather Proof Housing.
•Multiple Mounting Configurations.
•Operating Temperatures: 0 Deg. C ~ 40 Deg. C
PTZ Control
•RS-485 Communication, MAX 256 Multi-drop
•Versatile Pelco-D and Pelco P Protocol
•Variable Pan and Tilt Speed
•64 Programmable Presets
•OSD Setup
•1 Programmable Cruise Sequence
3
P
an, Tilt and Zoom Dome Camera / ACD-1500
1
Introduction
Components
Parts Information
Item Part No. Description
Dome Camera and Housing ACD-1500 NTSC Dome Camera, Weather Proof Housing, Including Transparent Dome
Wall Mount Bracket Bracket for mounting PTZ to Wall
Ceiling Mount Bracket Bracket for mounting PTZ to Ceiling
Mounting Screws & Wrench Allen Screws for mounting PTZ to Mount
Power Supply 24v AC Power Supply
Manual Manual for ACD-1500
Default Components
Dome Camera and Housing Wall Mount Bracket
Ceiling Mounting Bracket Accessories
ACD-1500 Manual
Screws, Wrench and Power Supply
Manual
4
P
an, Tilt and Zoom Dome Camera / ACD-1500
1
11
INTRODUCTION
INTRODUCTIONIntroduction
System Configuration
Configuration
RS-485 Input
Monitor
DVR
BlueNet Video server BlueNet Video server Video Output
PTZ Controller
DVR
Part Description
Wiring Access
Mount
Housing
Acrylic Dome
(Camera inside)
•Mount Used to install Camera Housing
•Housing Protects Internal Components From the Elements
•Acrylic Dome Protects PTZ Camera
•Wiring Access Allows access to internal wiring
•Built in Heaters Keeps lens clear in cold weather
5
P
an, Tilt and Zoom Dome Camera / ACD-1500
2
2
2
INSTALLATION
INSTALLATION
INSTALLATIONInstallation
System Installation
Wall Mount Installation using Outdoor Housing Assembly
1) Attach the Wall Mount Bracket to the wall.
Make sure the wall can support the weight and
vibration of the camera and housing.
2) Remove thumb screw holding access cover in
place on Mounting Arm.
3) Route the wiring through the inside of the arm
and out the access hole.
4) Assemble and screw the Outdoor Housing
Assembly on the Mount Bracket while routing
the wiring from the camera through the neck of
the bracket and out the access hole.
Continue to page 8
6
P
an, Tilt and Zoom Dome Camera / ACD-1500
2
2
INSTALLATION
INSTALLATIONInstallation
Ceiling Mount Installation using Outdoor Housing Assembly
1) Mount the Top Ceiling Mount Bracket to the
Ceiling. Make sure the Ceiling can support the
weight and vibration of the camera and
housing.
2) Route the wiring through the bottom Ceiling
Mount Bracket and Extension.
3) Attach assembly to the PTZ camera using the
included Allen Screws. Tighten setscrews.
4) Align the PTZ Assembly into the top of the
ceiling mount. Turn clockwise to thread
extension into mount. Tighten setscrews.
Continue to Next Page
7
P
an, Tilt and Zoom Dome Camera / ACD-1500
2
Installation
5) Unscrew Polycarbonate dome cover counter-
clockwise.
6) Remove BLACK camera cover inside of
housing.
7) Set DIP switches according to Protocol and
Baud rate desired. (See page 9 for details)
8) Replace BLACK camera cover and
Polycarbonate dome cover.
8
P
an, Tilt and Zoom Dome Camera / ACD-1500
3
Camera Addressing
Camera Addressing
RS-485 communication
RS-485 communication is used to control the camera. Protocol, Baud rate and Camera Address are
set using 2 Dip Switch sets under the BLACK camera cover inside the PTZ housing. Each camera
connected to the PTZ controller must have a unique address.
•Specification Standard RS-485 with MAX. 256 Camera Control
•Number of wire 2 Wire (D+, D-)
•Protocol Pelco-D, Pelco-P, A01, B01, Santachi, Longcomity and HUNDA600
SW 1 : Camera Address Settings
12345678
ON
SW1
SW1:Address Setting (1~255)
NO.
Value. 12345678
1 2 8 16 32 64 128
4
• Camera address is set to 1 as the factor
y
default.
• When a dip switch is ON, its bit logic is 1
• Dip Switch 9 and 10 are always set to OFF
Dipswitch
SW2
Dipswitch
SW1
9
P
an, Tilt and Zoom Dome Camera / ACD-1500
3
Camera Addressing
SW 1 : Camera Address Settings (continued)
When using more than 1 RS-485 device each unit must be given a unique address. Refer to the
chart on the previous page for the value of each dip switch. For each dip switch that is ON the
value/values are added together, the total is the address of that unit.
For Example:
For an address of 1:
Dip switch #1 (value = 1) will be ON all others OFF
For an address of 5:
Dip switch #1 (value = 1) & #3 (value = 4) will be ON all others OFF
For an address of 157:
Dip Switch #1 (value = 1), #3 (value = 4), #4 (value = 8), #5 (value = 16), #8 (value =
128) will be ON all others OFF
10
P
an, Tilt and Zoom Dome Camera / ACD-1500
Indice
