Design Analysis H-350XL Manuale utente

XL™ Series

Models H-350XL™

H-500XL™

H-510XL™

H-522

H-522-Plus

Owner’s Manual

XL™ Series

Data Logger /

Data Collection Platform

Owner’s Manual

Revision: 2.13 - 000

NOTICE

This product embodies technology that is confidential and proprietary technology of DESIGN

ANALYSIS ASSOCIATES, INC., and which is protected by United States copyright laws and

international copyright treaty provisions, and/or by contract and applicable laws of trade secrecy.

These include all Software, Printed Circuit Board Artwork, Schematic Diagrams, and

Technologies applied therein. The enclosure encasing the electronics of this instrument may not

be opened without written consent of DESIGN ANALYSIS ASSOCIATES, INC., and any

attempt to do so without such written authorization constitutes a breach of contract and will also

void any applicable warranty for the product.

Design Analysis Associates, Inc.

75 West 100 South

Logan, UT 84321 USA

Phone: (435) 753-2212

Fax: (435) 753-7669

Internet: www.waterlog.com

E-mail: sales@waterlog.com

Table of Contents

User Agreement/WATERLOG Warranty.........................................

®W-1

Chapter 1 Introduction

1.1 Introduction to the XL™ Series Data Logger. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

1.2 UnpackingtheXL™SeriesDataLogger. ..................................... 1-2

1.3 ModesOfOperation. ..................................................... 1-3

1.3.1 SDI-12SensorMode..................................................... 1-3

1.3.2 DataLogger/DCPMasterMode........................................... 1-3

1.3.3 OperationUsingAuxiliaryOutputs. ........................................ 1-4

1.3.4 Operation With The H-355 Gas Purge System (Bubbler). . . . . . . . . . . . . . . . . . . . . . . . 1-4

1.4 AboutthisManual........................................................ 1-4

1.5 AdvancedManualSections................................................. 1-4

1.6 WebPageSupport........................................................ 1-4

Chapter 2 Hardware Options and Installation

2.1 MechanicalMounting. .................................................... 2-1

2.2 FrontPanelDescription.................................................... 2-1

2.2.1 EarthGroundLug....................................................... 2-2

2.2.2 PressureReferencePort(Vent)............................................. 2-2

2.2.3 PressurePort(Input)..................................................... 2-2

2.2.4 GOESAntennaOutput................................................... 2-3

2.2.5 GPSAntennaConnector.................................................. 2-3

2.2.3.1 Sample Installation for the Conoflow System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

2.2.3.2 Making the Pressure Connection to the H-355 Bubbler. . . . . . . . . . . . . . . . . . . . . . . . 2-5

2.2.6 Bubbler/AuxPort. ..................................................... 2-6

2.2.7 RS-232Ports........................................................... 2-7

2.2.8 AnalogInputSection. ................................................... 2-8

2.2.8.1 AnalogInputChannels.................................................. 2-8

2.2.8.2 AnalogGrounds....................................................... 2-8

2.2.8.3 Switched +5 Volt Reference Excitation.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9

2.2.9 Wind Speed Input (AC Frequency Input). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9

2.2.10 EventCounterInput................................................... 2-10

2.2.11 4to20MilliampOutput................................................ 2-11

2.2.12 DigitalI/O1and2. ...................................................2–12

2.2.13 SDI-12Section....................................................... 2-13

2.2.14 PowerConnections.................................................... 2-14

2.3 TestingtheInstallation.................................................... 2-14

2.4 HardwareRevisionDetection. ............................................. 2-15

Chapter 3 Using The Built In keypad / Display

3.1 Overview............................................................... 3-1

3.2 Keypad/DisplayOperation.................................................. 3-1

3.3 Familiarization........................................................... 3-6

3.4 MainMenuDescription.................................................... 3-7

Chapter 4 Using the PC Menu Interface Operation

4.1 PCMenuInterface........................................................ 4-1

4.2 PCMenuGeneralOperations. .............................................. 4-2

4.3 MainMenuScreen........................................................ 4-3

Chapter 5 General System Options

5.1 Overview............................................................... 5-1

5.2 SystemSetup............................................................ 5-1

5.3 TimeSyncOptions........................................................ 5-5

5.4 AdvancedSystemSetupOptions............................................. 5-8

Chapter 6 Serial Port Options

6.1 Introduction............................................................. 6-1

6.2 SerialPortMenus......................................................... 6-1

6.3 SerialPortHardwareDescription. ........................................... 6-6

6.4 SerialPortFunctions...................................................... 6-7

Chapter 7 System Configuration Files

7.1 Overview............................................................... 7-1

7.2 ConfigurationFilesMenus. ................................................ 7-1

7.3 SampleConfigurationFile.................................................. 7-3

Chapter 8 System Status Menus / Optioons

8.1 StatusOptionsOverview................................................... 8-1

8.2 StatusMenus............................................................ 8-1

8.3 StatusScreenOperations................................................... 8-2

Chapter 9 Scanning Options

9.1 Introduction............................................................. 9-1

9.2 ScanningMenus.......................................................... 9-1

9.3 ScanningOptions......................................................... 9-1

Chapter 10 Stage Menus / Options

10.1 StageSensorandRemoteStageSetup....................................... 10-1

10.2 Stage / Temperature Menus (H-350XL Only). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1

10.3 Stage Options (H-350XL / H-510XL Only). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-2

10.4 PtTempSensorSetup(H-350XLOnly)...................................... 10-4

10.5 RemoteStageSetupOverview. ........................................... 10-5

10.6 RemoteStageMenus.................................................... 10-5

10.7 RemoteStageOptions................................................... 10-5

Chapter 11 Analog Inputs / 5 Volt Excitation

11.1 AnalogInputsOverview. ................................................ 11-1

11.2 AnalogMenus......................................................... 11-1

11.3 AnalogOptions. ....................................................... 11-2

11.4 AnalogInputConnections................................................ 11-4

11.4.1 Analog Inputs and Analog Ground Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-4

11.4.2 Switched +5.00 Volt Reference Excitation.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-5

11.5 AnalogInputSetupExamples............................................. 11-6

11.6 TwoPointCalibrationBasics. ............................................ 11-7

Chapter 12 Digital I/O

12.1 DigitalI/OOverview.................................................... 12-1

12.2 DigitalI/OMenus. ..................................................... 12-1

12.3 DigitalI/OOptions...................................................... 12-2

12.4 QuadratureShaftEncoderOptions. ........................................ 12-7

Chapter 13 Counter And frequency Inputs

13.1 Introduction........................................................... 13-1

13.2 CounterandFrequencyMenus. ........................................... 13-1

13.3 CounterOptions........................................................ 13-2

13.4 FrequencyOptions...................................................... 13-6

Chapter 14 SDI-12 Operations

14.1 SDI-12Overview....................................................... 14-1

14.2 SDI-12 Transparent Mode and Full Screen Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-1

14.3 SDI-12DataLoggerMode................................................ 14-6

14.4 SDI-12SensorMode.................................................... 14-9

14.5 H310Setup........................................................... 14-12

14.6 H330/H331Setup..................................................... 14-14

14.7 SDI-12 Sensor Mode Supported Commands.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-16

14.7.1 SDI-12 Command and Response Protocol. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-17

14.7.2 StandardSDI-12CommandSet......................................... 14-18

14.7.3 SendAcknowledgeCommand.......................................... 14-18

14.7.4 SendIdentificationCommand.......................................... 14-19

14.7.5 MeasureCommand. ................................................. 14-20

14.7.6 InitiateVerifyCommand.............................................. 14-22

14.7.7 SendDataCommand................................................. 14-23

14.7.8 ChangeSensorAddress............................................... 14-24

14.7.9 ExtendedSDI-12CommandSet........................................ 14-24

14.7.10 Write “User Units Slope” Command .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-25

14.7.11 Write “User Units Offset” Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-26

14.7.12 Read “User Units Slope” Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-27

14.7.13 Read “User Units Offset” Command .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-28

Chapter 15 Logging Options

15.1 LoggingOverview...................................................... 15-1

15.2 LoggingOptionsMenu. ................................................. 15-1

15.3 LoggingOptions. ...................................................... 15-2

Chapter 16 Operation with the GOES Radio

16.1 Introduction........................................................... 16-1

16.1.1 GOESRadioDataConnection........................................... 16-1

16.1.2 GOESRadioTypes.................................................... 16-1

16.2 Configuring the GOES Radio, General Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-3

16.3 GOESSelfTimedOptions............................................... 16-10

16.4 GOESRandomOptions................................................. 16-24

16.5 GOESDiagnostics..................................................... 16-28

16.6 GOESRadioSetupExample............................................. 16-31

16.7 GOESBinaryData..................................................... 16-32

16.8 GOES Four Byte Pseudo-Binary Lookup Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-34

16.9 CommonGOESTerms. ................................................ 16-35

16.10 JulianDayTables..................................................... 16-37

16.11 GOES Downlink Message Header Basics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-39

Chapter 17 ALERT Radio Operation

17.1 Introduction........................................................... 17-1

17.2 ALERTMenus......................................................... 17-1

17.3 ALERTOptions........................................................ 17-2

17.4 Special Cases For ALERT Transmissions.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-8

Chapter 18 4 to 20 Milliamp Output

18.1 Introduction........................................................... 18-1

18.2 4To20MilliampMenus................................................. 18-1

18.3 4To20MilliampOptions................................................ 18-1

18.4 4 To 20 Hardware Connections / Wiring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-4

Chapter 19 Alarm Call Out

19.1 Overview............................................................. 19-1

19.2 AlarmCallOutMenus................................................... 19-1

Chapter 20 Data Card Options

20.1 DataCardOptions...................................................... 20-1

20.2 DataCard/MemoryOptions.............................................. 20-2

Chapter 21 Operation With the H-355 "Smart Gas" System

21.1 IntroductiontotheH-355................................................. 21-1

21.2 H-355Menus.......................................................... 21-1

21.3 H-355Options......................................................... 21-2

21.4 H-355ConfigurationDrawing............................................. 21-7

Chapter 22 Functions

22.1 Introduction........................................................... 22-1

22.2 FunctionMenu......................................................... 22-1

Chapter 23 XL-Basic Programming Guide

VersionChangesInformation. ................................................. 23-1

MainProgramVariables. ..................................................... 23-2

GeneralPurposeVariables............................................... 23-2

StandardInputVariables................................................ 23-3

ReadOnlyVariables. .................................................. 23-4

MathFunctions. ............................................................ 23-5

XL-BasicCommandSummary. ................................................ 23-6

XL-BasicLanguageDescriptions. .............................................. 23-8

CreatingXL-BasicPrograms.................................................. 23-18

XL-BasicMenuScreens. .................................................... 23-18

ExampleProgram#1........................................................ 23-20

ExampleProgram#2........................................................ 23-21

Chapter 24 Maintenance / Troubleshooting

24.1 Maintenance........................................................... 24-1

24.2 Troubleshooting........................................................ 24-1

Appendix A XLSeriesSpecifications. ......................................... A-1

Appendix B Blank...........................................................B-1

Appendix C RemoteOperation(CommandMode).................................C-1

User Agreement/

WATERLOG Warranty

XL Series User Agreement/WATERLOG Warranty W-1

1. NATURE OF THE PRODUCT

This agreement accompanies a pressure measuring/data collection system comprising firmware,

circuitry and other electronic equipment in an enclosed housing, and packaged together with written

instructional materials. The packaged electronic circuitry and instructional materials herein are

collectively referred to as the “PRODUCT.” The PRODUCT is made available from DESIGN

ANALYSIS ASSOCIATES, INC., of 75 West 100 South, Logan, Utah 84321 (hereinafter referred to as

“DESIGN ANALYSIS”), and contains information and embodies technology that is confidential and

proprietary to DESIGN ANALYSIS, and the availability and use of the PRODUCT is extended to you,

the USER, solely on the basis of the terms of agreement which follow.

2. ACKNOWLEDGMENTS BY USER

Opening the package which encloses the accompanying PRODUCT indicates your acceptance of the

terms and conditions of this agreement and constitutes an acknowledgment by you of the confidential and

proprietary nature of the rights of DESIGN ANALYSIS in the PRODUCT.

3. DUTIES OF YOU, THE USER

In consideration for the access to and use of the PRODUCT extended to you by DESIGN ANALYSIS

and to protect the confidential and proprietary information of DESIGN ANALYSIS, USER agrees as

follows:

(a) USER agrees that they will not remove from the exterior of the housing of the

PRODUCT any safety warnings or notices of proprietary interest placed thereon by

DESIGN ANALYSIS.

(b) USER agrees that they shall not disassemble or otherwise reverse engineer the

PRODUCT.

relation to their own confidential and proprietary information.

4. TERM

USER may enjoy these rights only as long as their possession of the PRODUCT shall continue to be

rightful. These rights will cease if the PRODUCT is returned to DESIGN ANALYSIS under the terms of

any redemption offer, warranty, or money-back guarantee, or if USER transfers the PRODUCT to

another party on terms inconsistent with this agreement.

5. LIMITED WARRANTY

(a) What is Covered

DESIGN ANALYSIS warrants that for a period of twelve months from the time of delivery the

functions to be performed by the PRODUCT will be substantially in compliance with USER

documentation. DESIGN ANALYSIS also warrants that the PRODUCT will be free from

defects in materials and workmanship for a period of ONE YEAR from the date of delivery.

W-2 User Agreement/WATERLOG Warranty XL Series

(b) What USER Must Do

If the product fails to satisfy the above warranty, USER must notify DESIGN ANALYSIS in

writing within the applicable period specified above and reasonably cooperate with the directions

they received from DESIGN ANALYSIS.

DESIGN ANALYSIS will repair the PRODUCT or will endeavor to provide a replacement of

same within a reasonable period of time. In the event that DESIGN ANALYSIS is unable to

make the necessary repairs or replacement within a reasonable period of time, the original

purchase price will be refunded upon the return of the PRODUCT to DESIGN ANALYSIS.

(d) Limitations

(i) THE ENTIRE REMEDY FOR BREACH OF THIS LIMITED WARRANTY

SHALL BE LIMITED TO REPLACEMENT OF THE DEFECTIVE PRODUCT

OR REFUNDING OF THE PURCHASE PRICE, AS SET FORTH ABOVE.

IN NO EVENT WILL THE LIABILITY OF DESIGN ANALYSIS TO USER

OR TO ANY OTHER PARTY EXCEED THE ORIGINAL PURCHASE PRICE

OF THE PRODUCT, REGARDLESS OF THE FORM OF THE CLAIM.

(ii) EXCEPT FOR THE EXPRESS WARRANTIES ABOVE, DESIGN ANALYSIS

SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES, INCLUDING,

WITHOUT LIMITATION, ALL IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

(iii) UNDER NO CIRCUMSTANCES WILL DESIGN ANALYSIS BE LIABLE

FOR SPECIAL, INCIDENTAL, CONSEQUENTIAL, INDIRECT, OR ANY

OTHER DAMAGES OR CLAIMS ARISING FROM THE USE OF THIS

PRODUCT, THIS INCLUDES LOSS OF PROFITS OR ANY OTHER

COMMERCIAL DAMAGES, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN NO EVENT WILL DESIGN ANALYSIS BE LIABLE

FOR ANY CLAIMS, LIABILITY, OR DAMAGES ARISING FROM

MODIFICATION MADE THEREIN, OTHER THAN BY DESIGN

ANALYSIS.

(iv) THIS LIMITED WARRANTY GIVES USER SPECIFIC LEGAL RIGHTS.

USER MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE

TO STATE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW

LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF

INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THOSE

LIMITATIONS OR EXCLUSIONS MAY NOT APPLY.

6. GOVERNING LAW

This Agreement and its validity and interpretation shall be governed by the laws of the State of Utah,

notwithstanding any choice of law rules of Utah or any other state or jurisdiction.

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Registratore di dati popolari di altre marche

TESTO

TESTO 176 Manuale utente

HT Italia

HT Italia XL421 Manuale utente

HBM

HBM SOMAT XR CX22B-R Manuale utente

Agtrix

Agtrix 380i Manuale utente

Hobo

Hobo H8 Pro Manuale utente

Beijing ART Tech

Beijing ART Tech PCI2320 Manuale utente

Athena

Athena GET SL1 Manuale utente

Motec Systems

Motec Systems C185 Manuale utente

Beijing ART Tech

Beijing ART Tech USB2832 Manuale utente

Rotronic

Rotronic HygroLog HL20 Manuale utente

MRC

MRC DW-6092 Manuale utente

Racelogic

Racelogic VBOX LapTimer Manuale utente

Edu-Logger

Edu-Logger 900-240 Manuale utente

Elma

Elma DT173 Manuale utente

MadgeTech

MadgeTech PRTemp140 Scheda tecnica

Comet

Comet U0121M Manuale utente

pico Technology

pico Technology PT-104 Manuale utente

Soil Instruments

Soil Instruments GTecLink Manuale utente