Deskontrol Electronics deskontroller 64 Manuale utente
deskontroller 64 – user manual
Art-Net Controller for LED pixels and digital LED strips
64 universes 32768 Channels
LED t pes supported
APA102, SK9822, DM413, D705, D707, D708
DMX512 TTL levels, DMX500K TTL levels, DMX750K TTL levels, DMX1000K TTL levels, DMX1250K TTL
levels, DMX1500K TTL levels, DMX2000K TTL levels, DMX2500K TTL levels
INK1002, INK1003, LX1003, LPD1886, LPD1882, LPD6803, LPD6813, LPD1101, LPD8803, LPD8806
MBI6021, P9813, P9816, P9883, P9823, SK6812, SM16703, SM16726
TM1803, TM1809, TM1812, TM1814, TM1829, TM1903, TM1926
UCS1903, UCS1903B, UCS1909, UCS1909B, UCS1912, UCS1912B , UCS2903, UCS2903S, UCS2909,
UCS2912, UCS3903, UCS8903, UCS5903, UCS6909, UCS6912, UCS7009
WS2801, WS2803, WS2811, WS2812, N OPIX L, WS2812B, WS2812S, WS2813, WS2813A, WS2813B,
WS2813C, WS2813D, WS2818, WS2821, WS2822
User Manual
deskontrol electronics – Av. Del Port 158-9ª – 46023 Valencia Spain) - Art-Net controller for LED Pixels – User Manual
Page 1
deskontroller 64 – user manual
Contents Page
Safety and maintenance information 03
Included, Features, Universe SPI outputs 04
Art-Net Network configuration 05
deskontroller 64 detail 06
Switches configuration
- Configure L D type 07
- Start Art-Net Subnet setup
- Universes by output 10
- Complement signal
- Order color RGB setup 11
- Order color RGBW setup 12
Outputs wires connections 13
Output connections 14
Connection output ports 15
RGB L Ds and Channels distribution 16
RGBW L Ds and Channels distribution 17
Hard Reset, Specifications 18
C , ROHS, FCC Certification 19
Warranty 20
deskontrol electronics – Av. Del Port 158-9ª – 46023 Valencia Spain) - Art-Net controller for LED Pixels – User Manual
Page 2
deskontroller 64 – user manual
Safet information & Maintenance
Read this manual before powering or installing the device, follow the safety precautions listed below
and observe all warnings in this manual.
• Be sure that the local power outlet matches that of the required voltage of the power supply
included with this device.
• To reduce the risk of fire or electrical shock, do not expose the unit to rain or high levels of
moisture.
• Do not spill water or other liquids into or on your unit.
• Do not open the unit as there are no user serviceable parts inside.
• Do not dismantle or modify the unit, as this voids all warranties.
• Do not attempt repairs. Repairs by unqualified people could cause damage or faulty operation.
• Unplug this unit when not used for long periods of time.
• Clean only with dry cloth.
• Handle this unit carefully. Any strong shock or vibration may result in malfunction.
deskontrol electronics – Av. Del Port 158-9ª – 46023 Valencia Spain) - Art-Net controller for LED Pixels – User Manual
Page 3
deskontroller 64 – user manual
Included
- Art-Net L D controller deskontroller 64
- Power supply 12v 1A (Connector available for U, UK, US, AU)
- 8 pcs RJ45/screew terminal adapter
Features
- Integrated SPI Controller Art-Net for led pixels and digital L D strips
- 50 fps (framerate) 20 mS, for most type of L D
- 64 universes output (32768 Channels)
- 4 universes (2048 Channels) for each output
- Settings configured by DIP switches and software
- RGB and RGBW color order
- Configuration Art-Net Subnet
- Support synchronization mode.
- Works with any software that supports console or the Art-Net™ protocol as MADRIX®, Resolume®,
and any software that supports the Artnet protocol.
Universe SPI outputs:
Use standard network cable
We have tested, and worked without problems up to 50 meters (164 feets) of distance from controller
to leds.
In any case maintain signal lines as short as possible.
NOT : nsure that the L D pixels or L D strips, with the right connections
Never be guided by the position or color-coded cables, as they differ from one manufacturer to
another.
deskontrol electronics – Av. Del Port 158-9ª – 46023 Valencia Spain) - Art-Net controller for LED Pixels – User Manual
Page 4
deskontroller 64 – user manual
Art-Net Network configuration:
Art-Net uses as hardware ethernet networks, their messages use UDP port 6454. There are two
ranges of IPs defined for use: 2.x.x.x/8 and 10.x.x.x/8 (If you connect through a router or a computer
connected to the Internet), the subnet mask should always be 255.0.0.0
The default node IP address is indicated on the label of the controller, if we use a computer as a
controller needs to be set in the same IP range (eg: IP = 2.0.0.1 subnet mask = 255.0.0.0 Gateway =
2.0.0.1)
Recommended to use in the network must be Gigabit thernet.
Preferably ethernet network must be exclusive use for Art-Net. There should be no Art-Net network
connection to Internet (because the IP range 2.0.0.0 is also assigned on the Internet), if there is a
router on network with Internet access, the packets sent to addresses Art-Net 2.x.x.x are routed to
Internet, and deskontroller 64 will not work.
Art-Net Network configuration.
deskontrol electronics – Av. Del Port 158-9ª – 46023 Valencia Spain) - Art-Net controller for LED Pixels – User Manual
Page 5
deskontroller 64 – user manual
Detail deskontroller 64
deskontroller 64 front
deskontroller 64 back
deskontrol electronics – Av. Del Port 158-9ª – 46023 Valencia Spain) - Art-Net controller for LED Pixels – User Manual
Page 6
Input signal Art-Net from our software
Switches configuration Hard Reset
Power (It turns off when the controller responds)
Input power 9-24 VDC
Outputs 1 to 8 Outputs 9 to 16
deskontroller 64 – user manual
Switches configuration
Configure LED t pe
DIP Switch 1 - Switches 1 to 7
TM1803 (framerate 50 fps / 20 mS / 64 universes)
TM1809 (framerate 50 fps / 20 mS / 64 universes)
TM1812 (framerate 50 fps / 20 mS / 64 universes)
WS2811, WS2818 (framerate 50 fps / 20 mS / 64 universes)
WS2812, NEOPIXEL, P9883, P9823 (framerate 50 fps / 20 mS / 64 universes)
WS2812B (framerate 50 fps / 20 mS / 64 universes)
WS2812S (framerate 50 fps / 20 mS / 64 universes)
UCS1903, UCS1903B, UCS1909, UCS1909B, UCS1912, UCS1912B
UCS2903, UCS2903S, UCS2909, UCS2912, INK1002, INK1003,
LX1003 (framerate 50 fps / 20 mS / 64 universes)
LPD1886, LPD1882 (framerate 50 fps / 20 mS / 64 universes)
TM1814 (framerate 50 fps / 20 mS / 64 universes)
TM1829 (framerate 50 fps / 20 mS / 64 universes)
TM1903 (framerate 50 fps / 20 mS / 64 universes)
UCS3903 (framerate 50 fps / 20 mS / 64 universes)
deskontrol electronics – Av. Del Port 158-9ª – 46023 Valencia Spain) - Art-Net controller for LED Pixels – User Manual
Page 7
deskontroller 64 – user manual
Configure LED t pe
DIP Switch 1 - Switches 1 to 7
SM16703, WS2813, WS2813A, WS2813B, WS2813C, WS2813D
(framerate 50 fps / 20 mS / 64 universes)
SK6812 (framerate 50 fps / 20 mS / 64 universes)
TM1926 (framerate 50 fps / 20 mS / 64 universes)
UCS8903 (framerate 50 fps / 20 mS / 64 universes)
WS2801, WS2803, DM413 (framerate 50 fps / 20 mS / 64 universes)
LPD6803, LPD6813, LPD1101, UCS5903, UCS6909, UCS6912, UCS7009,
D705, D707, D708 (framerate 50 fps / 20 mS / 64 universes)
LPD8803, LPD8806 (framerate 50 fps / 20 mS / 64 universes)
P9813, P9816 (framerate 50 fps / 20 mS / 64 universes)
APA102 (framerate 50 fps / 20 mS / 64 universes)
SM16726 (framerate 50 fps / 20 mS / 64 universes)
MBI6021 (framerate 50 fps / 20 mS / 64 universes)
deskontrol electronics – Av. Del Port 158-9ª – 46023 Valencia Spain) - Art-Net controller for LED Pixels – User Manual
Page 8
deskontroller 64 – user manual
Configure LED t pe
DIP Switch 1 - Switches 1 to 7
DMX512 TTL levels
DMX500K TTL levels
DMX750K TTL levels
DMX1000K TTL levels
DMX1250K TTL levels
DMX1500K TTL levels
DMX2000K TTL levels
DMX2500K TTL levels
WS2821
WS2822
deskontrol electronics – Av. Del Port 158-9ª – 46023 Valencia Spain) - Art-Net controller for LED Pixels – User Manual
Page 9
deskontroller 64 – user manual
Start Art-Net Subnet setup
DIP Switch 1 - Switches 8, 9
Subnet 0 to 3 (default), universes 1 to 64
Subnet 4 to 7 , universes 65 to 128
Subnet 8 to 11, universes 129 to 192
Subnet 12 to 15, universes 193 to 256
Universes b output
DIP switch 2 - Switches 6, 7. To use L D types of low speed, such as DMX.
4 Universes b output (default)
3 Universes b output
2 Universes b output
1 Universe b output
Complement signal (Onl LEDs that need it) gamma “LPD” t pes
DIP switch 2 - Switch 8
Normal mode (default)
Active (onl if ou are sure ou need it)
For LED t pes, such as "LPD" that do not work.
deskontrol electronics – Av. Del Port 158-9ª – 46023 Valencia Spain) - Art-Net controller for LED Pixels – User Manual
Page 10
Indice
