Devialet Gecko REACTOR Manuale utente
ENGLISH
1
Gecko is an invention from Devialet,
Ingénierie Acoustique de France,
the most awarded company in
audio technologies.
Made in France
2
Any unauthorized modification could compromise your safety and prevent the
device from being used as intended.
If you experience any problems, please consult an expert.
For your safety, make sure that a disconnecting device (switch or circuit breaker)
is installed and easily accessible.
In a thunderstorm, turn off the power supply.
Make sure that your electrical installation complies with all the electrical standards
applicable in your country.
— Make sure that the wall on which the GECKO REACTOR wall mount is to be
installed is level, smooth and vertical.
— Make sure that the wall on which the GECKO REACTOR wall mount is to be
installed is not damaged and is able to support 22 lbs. at the fixing point.
— Only use the screws and dowels provided by DEVIALET for fitting the GECKO
REACTOR.
— For each mount type, use the screw and dowel combination stated below.
— When drilling into the wall, make sure that the drill bit has the correct diameter
and is suitable for the mount.
— It is important that the screws are secured to the wall properly to ensure that
the device is held in place.
— Installation should always be carried out by two people.
To avoid the risk of falling, fire and electrocution,
please read the following instructions carefully.
ENGLISH
3
PACK CONTENTS
— Assembled Gecko
— 1x screw for fixing the Reactor onto the Gecko
— 4x dowels for solid materials
— 4x screws for solid materials
— 4x dowels for hollow materials
— 4x screws for hollow materials
— 4x screw covers
4
To fix the Gecko Reactor to the wall, place the drilling
markings on the wall with the aid of the product.
INSTALLATION
Take all the components out of the box and remove the packaging.
Drill into your wall, paying close attention to the instructions on the following pages.
STEP 1
STEP 2
STEP 3
ENGLISH
5
1 — Walls made of solid material (natural stone, concrete, aerated concrete,
solid brick, drywall) or concrete blocks:
4 dowels 5/16” x 2 1/4”
4 screws 3/16” x 2 ”
Drilling depth (minimum): 2 3/8”
Drilling diameter: 5/16”
Ensure that neither the screw nor the dowel spins freely in the hole.
2 — Walls made of solid wood:
4 screws 3/16” x 2”
Drilling depth (minimum): 2”
Drilling diameter: 3/32”
6
3 — 1/2” drywall :
4 dowels 3/8” x 2”
4 screws 3/16” x 2”
Drilling diameter: 5/16”
Ensure that neither the screw nor the dowel spins freely in the hole. Do not fix to hollow
brick. If you do not feel confident or have not understood the contents of this manual, do not
fit the GECKO REACTOR wall mount and seek the help of a professional.
Attention:
Do not fix the GECKO REACTOR to a wall made of drywall less than 1/2 inch thick.
ENGLISH
7
Screw the Gecko onto the wall as tightly as possible using the correct screws, then
conceal the latter with the screw covers.
STEP 4
8
Place the Reactor on the Gecko, then tighten the screw provided as far as it will go in order to
lock the Reactor on its mount. Attention: The prescribed tightening torque is 44 lb-in.
Attention: If people are going to be walking under the GECKO Reactor, we recommend fixing
the PHANTOM Reactor in place using a steel wire as shown in the image.
— Make sure that you keep hold of the Reactor during the procedure.
— To avoid damaging your Reactor, do not handle it by the speakers.
— Make sure that the Reactor is not plugged in during fitting.
Plug in your Phantom Reactor.
STEP 5
STEP 6
Installation should always be carried out by two people.
ENGLISH
9
Note: You can adjust the angle of your Reactor as desired (up to +/- 110°).
Note 2: You can paint the Gecko Reactor to match the matte black of the Phantom Reactor
600 and Phantom Reactor 900; the color code is RAL 9005.
Oops! Do you need help?
Go to: help.devialet.com
Find out more at www.devialet.com
2-YEAR
WARRANTY
Attention: After changing the position, ensure that the fixing screw is still tight.
10
Indice
Lingue:
Altri manuali Devialet Rack e supporto
