- In the event that the device is exposed to extreme temperature changes (e.g. transported
from a cold outdoor environment into a warm indoor environment), it should not be turned on
until it has reached room temperature. This is necessary to prevent moisture (condensation)
from forming inside the device, which could lead to electric shocks.
Use & Operation Guidelines:
- This device is intended for indoor use and must only be operated by an adult.
- This device is not suitable for use by children and must always be operated by an adult.
- This device can only be used in appropriate environments where no damage to the device
can occur. Do not use the device in moist or dusty environments such as:
- indoor swimming pools where chlorine is used
- beaches or any location where sand and/or salt is present
- outdoors
- indoors in spaces where intense heat sources are present, or where it can reach
temperature levels that would be considered uncomfortable for a person.
- void impact and collisions during use and transport. Do not move or transport the device
while it is in use. - void using excessive force when installing and operating the device.
- ny user must become familiar with the functions of this device before using it.
- Should the device not be used in the manner described in this user manual, damages or
even injuries could occur. Devine cannot be held responsible for any injuries or damages
that occur as a result of improper use of this product.
Storage & Transport:
- This device is not designed for mobile use. This device must always be transported in its
original packaging, or in an appropriate padded bag/cover that is able to provide adequate
protection.
– This device has not been designed for continuous (24/7) use. Regularly switching off the
device will not affect its lifespan. lways switch off and disconnect the device whenever it is
not in active use.
- When the device is not in use for long periods of time, always disconnect the device and
store it in a dust free environment.
– Do not expose the device to extreme temperature shifts.
Housing:
- Frequently inspect the housing of the device and always just before use. void operating
the device if any large dents or cracks are found in the housing, or if screws are missing. Do
not use the device if the housing is not in good condition. Contact your dealer or a qualified
technician if you are unsure about the state of the device.
- Check the device and screws for any corrosion. If any corrosion is found, do not use the
device. Contact your dealer or a qualified technician if the screws or housing show any signs
of corrosion.
- Ensure that every power and signal socket is securely fitted. Do not use the device if any
of the sockets are not secure.
- void the build up of any dust and dirt. Clean the device once a month by disconnecting it
from the power supply and wiping it down with a dry or slightly moist cloth. If the device is
used frequently, the device should also be cleaned more frequently.
The information included in this user manual is subject to change at any time and without notification:
Version:
1.0
Date and author initials: 02-11-2020 RV Revision date and author initials: -
