Devon Tread 1 Manuale utente
OWNER MANUAL
enGlish
Thank you for purchasing the Tread 1, the first timepiece from Devon. The Tread 1
was designed, developed and manufactured in California, USA to the highest
standards the laws of physics allow.
DEVON timepieces are manufactured in California with state-of-the-art technology
and innovative processes. Each one must pass strict quality controls and undergo
rigorous testing throughout the manufacturing process before leaving our factory.
The international warranty of your watch runs for a period of two years from the date
of purchase and covers manufacturing defects that arise during normal usage. For your
convenience, a copy of the user manual and the warranty information are available on
our website, www.devonworks.com.
We invite you to visit the customer portal of our website at www.devonworks.com/
registration in order to register your Tread 1 and validate its warranty. Should your
watch need servicing, please bring it to an authorized DEVON retailer or send an
Please accept our warmest welcome to the DEVON brand, and know that we sincerely
appreciate the trust you’ve placed in us.
Kind regards,
Scott Devon
WELCOME
DISPLAY
minutes
seconds /
battery life
hours
The complicated case of the Tread 1 has been
designed with a remarkable sealing system requiring
nine different custom molded o-rings. Each o-ring has
been deliberately placed to prevent water penetration
through the connection of the eight complex case
components and four mounting screws. This sealing
system will prevent humidity, rain, and light splashing
water from penetrating into the watch. The open
viewing lens does not allow for a sealing method that
can be guaranteed to a specific water depth. This
complete sealing system may save your investment
should your watch be accidentally submerged,
however Devonworks advises that you remove
your watch before showering, swimming, or
any other activity that may cause your watch to
become wet. In order to avoid damage to the watch,
please never operate the crown when it is wet.
WATER RESISTANCE
ON / OFF
To turn the Tread 1 ON / OFF:
PUSH crown IN and RELEASE.
If the Tread 1 is entering into ON mode, the Tread 1
will bring the indication belts to the current time.
If the Tread 1 is entering into OFF mode, the Tread
1 will bring the indication belts to the 12:00:00
position and then advance the second belt to indicate
battery reserve. (see Battery Life Indicator).
crown
TIME SET
Time can only be set when the Tread I is turned ON.
The TIME SET mode of the Tread 1 allows the user
to adjust the time.
To enter TIME SET mode:
TWIST crown CLOCKWISE and RELEASE.
The Tread 1 will stop advancing the second belt
to indicate the activation of TIME SET mode.
To adjust minute indicator belts one position:
TWIST crown CLOCKWISE and RELEASE.
To adjust minute indicator belts multiple positions:
TWIST crown CLOCKWISE and HOLD.
To adjust hour indicator belt one position:
TWIST crown COUNTER CLOCKWISE and RELEASE.
To adjust hour indicator belt multiple positions:
TWIST crown COUNTER CLOCKWISE and HOLD.
To exit TIME SET mode:
PUSH crown IN and RELEASE. The Tread 1 will
start advancing the second indication belt to
indicate the exit of TIME SET mode.
BATTERY
LifE indiCatOr
The Battery Reserve Indicator is automatically displayed
when the watch is turned OFF.
The second belt will advance to a number between 0
and 10 to indicate the remaining battery life at the time
the Tread 1 is powered off. If 9 is indicated, the battery
has 90% power reserve. If the 5 is indicated, the bat-
tery has 50% power reserve, and so on.
If a low battery is detected by the Tread 1, the second
belt indication will automatically be disabled, but the
Tread 1 will continue to track the time on the Hour and
Minute indicator belts. This allows the Tread 1 to continue
operating with dramatically reduced power consumption.
This is an indication that the Tread 1 should be placed in
the charging station.
Once the Tread 1 detects an ample amount of
battery energy from charging, the Tread 1 will then
automatically re-enable the second belt indication.
If the Tread 1 is not placed onto the charger, the
battery will continue to drain. Once the battery level
goes below a usable level the internal circuitry will
disable all belt movement. The Tread 1 must be
placed in the charging station in a short period of
time to retain the set time. Once the battery level is
brought back to a usable level, the Tread 1 can be
turned on again.
A completely depleted battery needs a complete 8
hour charge before returning the watch to service.
Indice
Lingue:
Altri manuali Devon Orologio
