Deye Spring Series Manuale utente

User Manual

Spring series LFP Battery

SE-G5.1 Pro

V1.4

-1-

Read and follow these instructions!

The following precautions are intended to ensure your safety and prevent property damage. Before

installing this product, be sure to read all safety instructions in this document for proper installation.

Failure to comply with the instructions with this symbol may result in a

serious accident, causing death or a severe injury.

Failure to comply with the instructions with this symbol may result in a

serious accident, causing a severe injury.

Failure to comply with the instructions with this symbol may result in

minor or moderate injury.

Provides information considered important but not hazard-related. The

information relates to property damage.

Read instruction before use

Risk of electric shock

Operate as specified by the manual

This product is designed to an integrated system, which must be performed by a qualified person

trained in electrical engineering and familiar with the characteristics and safety requirements of

lithium batteries. Do not use this product if you are unsure if you possess the necessary skills to

complete this integration.

 
 
 
-2- 
 
Table of Contents 
Precautions................................................................................................................................... 3 
1 General Safety Precautions........................................................................................................ 3 
2 Installation Precautions............................................................................................................... 3 
Product Introduction...................................................................................................................... 4 
1. Front Panel Function Introduction.............................................................................................. 4 
2 Product Specifications................................................................................................................ 6 
3 State Indicator ............................................................................................................................ 7 
Unpack the Battery ....................................................................................................................... 7 
1 Parts List..................................................................................................................................... 7 
2 Visual Inspection of the Modules................................................................................................ 9 
Battery Installation............................................................................................................................ 9 
1 Battery Module Installation ....................................................................................................... 10 
Cable Connection........................................................................................................................... 11 
1 Single Battery Connection.................................................................................................... 11 
2 Connect Cables of the Multiple Batteries in Parallel................................................................. 14 
3 Visual Inspection of the Connection ......................................................................................... 17 
Activate the Product....................................................................................................................... 17 
1 Start the Battery........................................................................................................................ 17 
Inspection, Cleaning and Maintenance.......................................................................................... 17 
1 General Information.................................................................................................................. 17 
2 Inspection ................................................................................................................................. 18 
3 Cleaning ................................................................................................................................... 18 
4 Maintenance............................................................................................................................. 18 
5 Storage..................................................................................................................................... 18 
Troubleshooting ............................................................................................................................. 18 
Firmware Update............................................................................................................................ 19 
1 USB Upgrade ....................................................................................................................... 19 
2 PC Upgrade.......................................................................................................................... 20 
3 PCS Upgrade ....................................................................................................................... 23 
Battery recovery........................................................................................................................... 25 
1 Recovery process and steps of cathode materials................................................................. 25 
2 Recovery of anode materials.................................................................................................. 26 
3 Recovery of diaphragm........................................................................................................... 26 
4 List of recycling equipment:.................................................................................................... 26 
Transportation Requirements....................................................................................................... 26 
 
 

-3-

1. Precautions

1.1 General Safety Precautions

The product provides a safe source of electrical energy when operated as intended and as designed.

Potentially hazardous circumstances such as excessive heat or electrolyte mist may occur under

improper operating conditions, damage, misuse and/or abuse. The following safety precautions and

the warning messages described in this part must be observed.

If any of the following precautions are not fully understood, or if you have any questions, contact us

for guidance.

Risks of explosion



Do not subject the battery to strong impacts.



Do not crush or puncture the battery.



Do not dispose of the battery in a fire.

Risks of fire



Do not expose the battery o temperatures in excess of 60℃.



Do not place the battery near a heat source such as a fireplace.



Do not expose the battery to direct sunlight.



Do not allow the battery connectors to touch conductive objects such as wires.

Risks of electric shock



Do not disassemble the battery.



Do not touch the battery with wet hands.



Do not expose the battery to moisture or liquids.



Keep the battery away from children and animals.

Risks of damage to the battery



Do not allow the battery to come into contact with liquids.



Do not subject the battery to high pressures.

1.2 Installation Precautions

Please be aware that a battery presents a risk of electrical shock including high short-circuit current.

Follow all safety precautions while operating the batteries.



Remove watches, rings, and other metallic accessories.



Use tools with insulated handles in order to avoid inadvertent short circuits.



Wear rubber gloves and safety boots.

-4-



Do not put tools or any metal parts on the top of the batteries.



Disconnect charging source and load before connecting or disconnecting terminals.



When moving batteries and wear all appropriate safety clothing and equipment.



Do not open or mutilate the batteries.

▪Verify polarity at all connections before energizing the system. Reverse

polarity at the battery terminals will void the Warranty and destroy the

batteries. Do not short circuit the batteries.

▪Do not combine Lithium Batteries with other brands or chemistries; Do

not mix Lithium Batteries from different installations, clients, or job sites.

▪Do not disassemble or modify the battery. If the battery housing is

damaged, do not touch exposed contents.

2. Product Introduction

48 V series lithium iron phosphate battery system has been designed to provide power backup for

remote or outside telecom plants like Access Terminals, Base Transceiver Stations, and Base

Station Controllers. This system has the characteristics of high system integration, well reliability,

long service life, and wide operating temperature range.

2.1. Front Panel Function Introduction

In order to operate the product correctly, please carefully view the function of the front panel of the

battery.

-5-

Figure 2-1: Front Panel Function Introduction

1. Power button:to turn ON/OFF the whole battery BMS standby, no power output.

2. DRY CONTACT output.

3. PCS：Inverter communication terminal: (RJ45 port) follow the CAN protocol (baud rate:

500kbps), and RS-485(baud rate: 9600bps),used to output battery information to the inverter.

4. IN:parallel Communication Terminal: (RJ45 port) Connect "out" Terminal of Previous battery , for

communication between multiple parallel batteries.

OUT:parallel Communication Terminal: (RJ45 port) Connect "IN" Terminal of Next battery, for

communication between multiple parallel batteries.

5. SOC:These 5 LEDs are used to display the pack SOC. The lightning of these LEDs indicates the

SOC of 20%, 40%, 60%,80% and 100%.

6. RUN light: green LED lighting to show the battery running status

Alarm light: red LED lighting to show the battery has been alarmed.

7. USB : (USB port) Used to insert USB flash drive for battery upgrade.

8. Negative output terminal.

9. Positive output terminal.

-6-

10.Grounding bolt.

11.Handle: It was used to carry/move the battery.

12.Used for fixing with cabinet.

2.2 Product Specifications

Table 2-1: Product Specifications

Main Parameter

SE-G5.1 Pro

Battery Chemistry

LiFePO4

Capacity (Ah)

100

Scalability

Max. 64 pcs pack (327kWh) in parallel (Max. 32 pcs no external setup)

Nominal Voltage (V)

51.2

Operating Voltage(V)

43.2~57.6

Energy (kWh)

5.12

Usable Energy (kWh)[1]

4.61

Charge/Discharge

Current (A)

Recommend[2]

Max.[2]

100

Peak(2mins,25℃)

150

Other Parameter

Recommend Depth of Discharge

90%

Dimension (W/H/D,mm)

445*133*430

Weight Approximate(kg)

Master LED indicator

5LED(SOC:20%~100%)

3LED (working, alarming, protecting)

IP Rating of enclosure

IP20

Working Temperature

Charge:0℃～55℃

Discharge:-20℃～55℃

Storage Temperature

0℃～35℃

Humidity

5%~95%

Altitude

≤2000m

Cycle Life

≥6000(25±2℃,0.5C/0.5C,70%EOL)

Installation

19-inch standard cabinet, cabinet depth ≥600mm / with rack

Communication Port

CAN2.0, RS485

Certification

UL1973, IEC62619, CE, UN38.3

[1] DC Usable Energy, test conditions: 90% DOD, 0.5C charge & discharge at 25°C. System usable energy may vary due to system configuration parameters.

[2] The current is affected by temperature and SOC.

-7-

2.3 State Indicator

Condition

RUN

ALR

ERROR

SOC1

SOC2

SOC3

SOC4

SOC5

Power Off

Off

Discharge or

Idle

Blink

Bilnk if

Alarm

Exists

Off

e.g. Soc67%:

Off

Charge

Off

e.g. Soc47%:

Off

Blink

Alarm

Bilnk

Off

Same as 'Discharge or Idle'

System

Error/Protection

Upgrade

Blink Fastly

Critical Error

Blink Slowly

3. Unpack the Battery

The battery and the related accessories are packed in the carton box and steel belt wooden box. Use

tools to open the packing box. After open the packing box, confirm the product components

according to the parts list.

3.1 Parts List

Check the parts during unpacking.

Table 3-1: Parts Lists

No.

Items

Appearance

Usage

Qty.

Remarks

Battery

Provide power

Violent unpacking is strictly prohibited. If the battery system is found to be

broken, deformed or other abnormal conditions, the user shall immediately

stop using the battery and contact us.

-8-

RJ45

communication

line 300mm

Communication cable for

battery parallel

4AWG

Red&Black

Power line

300mm

Power cable for battery parallel

10AWG

yellow-green

ground line

300mm

Battery ground line

M6*16 Cabinet

bolt

Fix the battery on the rack or

cabinet

Battery Rack

Fixed Ears and

M4*8 bolt

Used for battery fixing with

19inch rack or cabinet

2 ears

6 bolts

User manual

Table 3-2: Recommended Tools andInstruments

No.

Items

Usage

Appearance

Phillips Screwdriver or Bit

Tofasten battery and

assemblies

Box Cutter

Opening boxes

Insulated TorqueWrench

Installing cables and busbars

Insulated Sockets

Installing cables and busbars

-9-

Battery Tester

Measure battery module’s

voltage

3.2 Visual Inspection of the Modules

After transporting the modules to the installation location, check for:



Physical damage to the exterior



Damaged or protruding screws

4. Battery Installation

This system must be installed by qualified, trained workers familiar with the required instruments.

▪Be sure to use insulated tools (torque wrench, extension, socket, etc.).

▪All the instruments must be insulated and no metal articles (e.g. watch,

ring) shouldbe present in the installation area.

▪All power switches must be turned off in advance.

▪Prepare a CO2 fire extinguisher, a first aid kit, and an AED (automated

external defibrillator) before installation.

Arc Flash and Shock Hazard

Insulated tools are required for any work on this energizedequipment.

Sharp Edges

Wear gloves and other protective gear to prevent injury.

Altri manuali per Spring Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Deye Accessori per fotocamere

Deye

Deye Spring Series Manuale utente

Deye

Deye Spring RW-M6.1 Manuale utente

Manuali Accessori per fotocamere popolari di altre marche

Viltrox

Viltrox EF-NEX Istruzioni per l'installazione

Calumet

Calumet 7100 Series CK7114 Manuale utente

Ropox

Ropox 4Single Series Manuale utente

Cambo

Cambo Wide DS Digital Series Istruzioni operative

Samsung

Samsung SHG-120 Manuale utente

Ryobi

Ryobi BPL-1820 Manuale operativo

Aegis

Aegis ABL-36020P Manuale utente

Pentax

Pentax Data Back Fc Manuale utente

Fantasea

Fantasea EyeGrabber F Series Manuale utente

Honeywell

Honeywell HDZ20HD Manuale utente

EGO

EGO BA1400T Manuale utente

Sima

Sima SRW-62 Manuale utente

Shape

Shape A7SSMKIT Manuale utente

Slide Kamera

Slide Kamera HST-2 Manuale utente

Power works

Power works 2902613 Manuale utente

SES

SES SE-2047-2 Manuale utente

Olympus

Olympus PT-EP05L Manuale utente

Starlite

Starlite OctoDome nxt Manuale utente