DFI EC900-8MM Manuale utente
© January 04, 2023 DFI Inc. 1
www.dfi.com
EC900-8MM / EC910-8MM
Quick Installation Guide
Package Contents
• 1 System unit
• 1 10-Pole Terminal Block for RS-422/4-bit DIO
• 1 2-Pole Terminal Block for RS-485
• 2-Pole Terminal Block for Power Input
• DIN Rail Bracket/Screw Pack
• Quick Installation Guide
Model for EC900-8MM
2Quick Reference | EC900-8MM / EC910-8MM
Product Overview
EC900-8MM
Front View
Left View
7
123
456
Status LED
Reset Button
COM (RS485)
LAN 1 & LAN 2 USB 2.0
DC IN
7
HDMI
8
A terminal block:
RS422 (4-pin)
Digital IO (4-pin)
Power (1-pin)
Ground (1-pin)
1
2
345
6
8
Rear View
Right View
9
10
910
Antenna Hole
DIN-rail Mount
3Quick Reference | EC900-8MM / EC910-8MM
EC910-8MM
Front View
Left View
Status LED DC IN
3
1
8
9
A terminal block:
RS422 (4-pin)
Digital IO (4-pin)
Power (1-pin)
Ground (1-pin)
9
2456
7
123
456
Reset Button
COM (RS485)
HDMI
COM LAN 1 & LAN 2
7
USB 2.0
8
4Quick Reference | EC900-8MM / EC910-8MM
Rear View
Right View
10
11
10 11
Antenna Hole
DIN-rail Mount
Quick Reference | EC900-8MM / EC910-8MM 5
Removing the Chassis Cover
Please observe the following guidelines and follow the instructions to open the system.
1. Make sure the system and all other peripheral devices connected to it have been
powered off.
2. Disconnect all power cords and cables.
Step 1:
The 2 screws on the both sides of the system are used to secure the cover to the chassis.
Remove the screws and put them in a safe place for later use.
Step 2:
Slide the cover to open the system.
Quick Reference | EC900-8MM / EC910-8MM 6
Installing an M.2 Card
Please follow the steps below to install the card into the socket.
Step 1:
Insert the card into the socket at an angle while making sure the notch and key
are perfectly aligned
.
Step 2:
Press the end of the card far from the socket down until against the stand-off.
Step 3:
Screw tight the card onto the stand-off with a screw driver and a stand-off screw
until the gap between the card and the stand-off closes up. The card should be
lying parallel to the board when it’s correctly mounted.
M.2 Module M.2 Socket
Key
Stand-off
Notch
M.2 Module M.2 Socket
Key
Stand-off
Notch
M.2 Module M.2 Socket
Key
Stand-off
Notch
M.2 Module M.2 Socket
Key
Stand-off
Notch
M.2 Sockets
Quick Reference | EC900-8MM / EC910-8MM 7
Before installing the antenna, please make sure that the following safety cautions are
wellattended
.
1. Make sure the PC and all other peripheral devices connected to it has been
powered
down
.
2. Disconnect all power cords and cables.
Step 1:
There are antenna holes reserved on the right side of the system and by default
covered by rubber plugs. Please remove the plug prior to installing an antenna.
Step 2:
Connect the internal cable to the board's antenna connector, screw the antenna
connector through the antenna hole with washers and nuts, and screw on the
antenna as illustrated below.
Antenna ConnectorCableModule Connector NutWasher
Chassis Wall Antenna
Installing an Antenna
Quick Reference | EC900-8MM / EC910-8MM 8
Mounting Options
Quick Reference | EC900-8MM / EC910-8MM 9
The system features DIN-rail mount chassis that facilitates fast installation of the EC900-
8MM/EC910-8MM to a DIN rail.
The DIN Rail mount kit includes the following:
• Din-rail mount bracket
• 2 screws
Step 1:
Use the provided mounting screws to attach the din-rail mount bracket to the top side of
the system.
Step 2:
Install the sytem onto the rail.
Jumper Settings
XIOJP1
5
2
6
2-4 On: VCCP 5V (Default)
6 5
2 1
6 5
2 1
3-5 On: DIO 5V (Default)
1-3 On: DIO 3V3 (Default)
2-4 On: VCCP 3V3 (Default)
1
Quick Reference | EC900-8MM / EC910-8MM 10
Altri manuali per EC900-8MM
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali DFI Hardware per computer
DFI
DFI QRB551 Manuale utente
DFI
DFI CR908-B Manuale utente
DFI
DFI TGU968 Manuale utente
DFI
DFI DFI R100 Manuale utente
DFI
DFI EC200 Series Manuale utente
DFI
DFI NXP i.MX8 Series Manuale utente
DFI
DFI PW35 Series Manuale utente
DFI
DFI VC900-M8M Manuale utente
DFI
DFI CMS310-W480E Manuale utente
DFI
DFI GM341-GHF Manuale utente
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
