Smart Siren V1.0 Smart Siren V1.0
②Click “ OK ” →smart siren light keep on →accessories send signals
→smart siren light flash 3 times, adding is successful.
In order to make it easier to distinguish different alarm events, you can
edit the accessories’name (within 24 characters).
Edit the accessory name:
15 16
16:07
Accessories editor
Detector name Home Do
16:07
accessories
The detector
1
The control
normal normal
normal
add
Press “RESET” button, the indicator light keep on,triger the detector→
siren indicator light flash 3 times,adding successfully. Pls do it like this
way to add more detectors.
door magnetic: Move the 2 sides
>2CM,indicator light flash and
send a signal.
PIR detector: Turn on the
switch,indicator light flash and
send a signal.
Method 2: Add detectors and remotes via the buttons on the siren
16:07
accessories
The detector The control
Temporarily no data
Trigger fitting alignment
Please refer to the manual to trigger the
corresponding accessories to code
Cancel OK
