Di-soric ID-01 Manuale utente

ID-01 Laser Scanner

User’s Manual

ID-01 User’s Manual

ii ID-01 Laser Scanner User’s Manual

ISO 9001 Certified

Issued by TüV USA

of allowing customers to operate and/or service di-soric manufactured equipment and is not to be

released, reproduced, or used for any other purpose without written permission of di-soric.

Throughout this manual, trademarked names might be used. Rather than place a trademark (™) symbol

at every occurrence of a trademarked name, we state herein that we are using the names only in an editorial

fashion, and to the benefit of the trademark owner, with no intention of infringement.

Disclaimer

The information and specifications described in this manual are subject to change without notice.

Latest Manual Version

For the latest version of this manual, see the Download Center on our web site at:

www.di-soric.com.

Technical Support

For technical support, e-mail: [email protected].

Warranty and Terms of Sale

For Standard Warranty information contact:

di-soric GmbH & Co. KG

Steinbeisstraße 6

DE-73660 Urbach

Fon: +49 (0) 71 81 / 98 79 - 0

Fax: +49 (0) 71 81 / 98 79 - 179

[email protected]

www.di-soric.com

ID-01 Laser Scanner User’s Manual iii

Introduction

Table of Contents

Chapter 1 Quick Start

Step 1 Check Hardware...........................................................................1-2

Step 2 Connect the System .....................................................................1-3

Step 3 Position Symbol and Scanner ......................................................1-4

Step 4 Install di-soric ID...........................................................................1-5

Step 5 Select Scanner Model ..................................................................1-6

Step 6 Autoconnect .................................................................................1-7

Step 7 Test for Read Rate .......................................................................1-8

Step 8 Calibrate the Scanner...................................................................1-9

Step 9 Save Calibration Settings for Power-On.....................................1-10

Step 10 Configure the Scanner .............................................................1-11

Chapter 2 Using di-soric ID

Setup Mode .............................................................................................2-2

Application Mode .....................................................................................2-3

Dropdown Menus.....................................................................................2-4

Connect Menu ........................................................................................ 2-9

View ...................................................................................................... 2-11

Navigating in di-soric ID.........................................................................2-12

Send/Receive Options ...........................................................................2-13

Chapter 3 Communications

Communications by di-soric ID ................................................................3-2

Communications by Serial Command .....................................................3-2

Password Protection................................................................................3-3

RS-232/422 Host Port..............................................................................3-4

RS-232 Auxiliary Port ............................................................................3-11

Preamble ...............................................................................................3-20

Postamble..............................................................................................3-21

LRC Status ............................................................................................3-22

Intercharacter Delay ..............................................................................3-22

Chapter 4 Read Cycle

Read Cycle by di-soric ID ........................................................................4-2

Read Cycle by Serial Command..............................................................4-2

Multisymbol..............................................................................................4-3

Number of Symbols .................................................................................4-4

Serial Trigger .........................................................................................4-12

End of Read Cycle.................................................................................4-14

Decodes Before Output .........................................................................4-16

Scanner Setup .......................................................................................4-17

Laser Setup ...........................................................................................4-21

Chapter 5 Symbologies

Symbologies by di-soric ID ......................................................................5-2

iv ID-01 Laser Scanner User’s Manual

Table of Contents

Symbologies by Serial Command ........................................................... 5-2

Code 39 ................................................................................................... 5-3

Code 128 ................................................................................................. 5-6

Interleaved 2 of 5................................................................................... 5-10

Codabar................................................................................................. 5-13

UPC/EAN............................................................................................... 5-16

Code 93 ................................................................................................. 5-19

Pharmacode .......................................................................................... 5-20

Narrow Margins ..................................................................................... 5-22

Symbology ID ........................................................................................ 5-23

Background Color.................................................................................. 5-24

Autodiscriminate .................................................................................... 5-24

Symbol Ratio Mode ............................................................................... 5-25

Chapter 6 I/O Parameters

Output Conditions by di-soric ID Menu.................................................... 6-2

I/O Parameters by Serial Command........................................................ 6-3

Symbol Data Output ................................................................................ 6-4

Message Output ...................................................................................... 6-7

No Read Message................................................................................... 6-8

Bad Symbol Message.............................................................................. 6-9

No Symbol Message ............................................................................. 6-10

Beeper................................................................................................... 6-11

Partial Output......................................................................................... 6-12

Serial Verification................................................................................... 6-13

EZ Button............................................................................................... 6-15

Output 1................................................................................................. 6-18

Output 2................................................................................................. 6-24

Output 3................................................................................................. 6-25

Quality Output........................................................................................ 6-26

Chapter 7 Matchcode

Matchcode by di-soric ID ......................................................................... 7-2

Matchcode by Serial Command .............................................................. 7-2

Overview of Matchcode ........................................................................... 7-3

Using Master Symbols............................................................................. 7-3

Matchcode Type ...................................................................................... 7-4

New Master Pin ....................................................................................... 7-9

Master Symbol Database ...................................................................... 7-10

Chapter 8 Diagnostics

Diagnostics by di-soric ID ........................................................................ 8-2

Diagnostics by Serial Command ............................................................. 8-2

Diagnostic Messages Overview .............................................................. 8-3

Counts ..................................................................................................... 8-4

Hours Since Last Reset........................................................................... 8-6

Laser High ............................................................................................... 8-7

ID-01 Laser Scanner User’s Manual v

Introduction

Laser Low ................................................................................................8-8

Service Message .....................................................................................8-9

Chapter 9 Calibration

Calibration................................................................................................9-2

Auto Frame ..............................................................................................9-6

Chapter 10 Terminal

Terminal Window ...................................................................................10-2

Find Function .........................................................................................10-3

Macros ...................................................................................................10-4

Terminal Window Functions ..................................................................10-5

Chapter 11 Utilities

Utilities by di-soric ID .............................................................................11-2

Summary of Utilities Commands ...........................................................11-3

Read Rate..............................................................................................11-5

Counters ................................................................................................11-6

Master Database ...................................................................................11-8

Digital Bar Code...................................................................................11-11

Firmware..............................................................................................11-12

Device Control .....................................................................................11-13

Symbol Type........................................................................................11-15

Defaulting/Saving/Resetting ................................................................11-16

di-soric Grading ...................................................................................11-17

Reader Status Requests......................................................................11-19

Appendices

Appendix A General Specifications ........................................................ A-2

Appendix B Electrical Specifications....................................................... A-5

Appendix C Serial Configuration Commands ......................................... A-6

Appendix D Serial Command Format ..................................................... A-9

Appendix E ASCII Table ....................................................................... A-11

Appendix F Defaulting/Saving/Resetting .............................................. A-13

Appendix G Symbol Configuration........................................................ A-15

Appendix H Object Detector ................................................................. A-17

Appendix I Formulas for Number of Decodes....................................... A-18

Appendix J Operational Tips................................................................. A-21

Appendix K Interface Standards ........................................................... A-22

Appendix L Multidrop Communications ................................................ A-23

Appendix M Troubleshooting ................................................................ A-28

Appendix N Glossary of Terms............................................................. A-30

vi ID-01 Laser Scanner User’s Manual

About the ID-01 Laser Scanner

The ID-01 is an ultra-compact scanner that can decode high density symbols from 2 to 10

inches at a 70 degree scan angle, at speeds of 300 to 1,000 decodes per second, with a

power draw of only 300mA at 5V. The multi-function EZ button can be used for read rate

tests and automatic calibration right out of the box, and it can also be programmed to per-

form a variety of other functions.

Programmable firmware also allows considerable control of multiple features, including

three programmable relay outputs and new master and trigger inputs.

The scanner can be configured with di-soric ID (Setup Program), di-soric’s proprietary

scanner setup software. di-soric ID can be downloaded from the di-soric website at

www.di-soric.com. You must be running Microsoft Windows 2000 or higher to use

di-soric ID.

Scanner Communication

There are five ways to program the scanner:

1. di-soric’s Windows-based di-soric ID, which offers point-and-click ease of use and

visual responses to user adjustments.

2. Serial commands such as <K100,1> can be sent from di-soric ID’s Terminal or

another terminal program.

3. Embedded firmware (onboard menus).

4. Symbol configuration.

5. The EZ Button on the top of the scanner.

Note: You can learn the current setting of any parameter by inserting a question mark after

the command number, as in <K100?> To see all “K” commands, send <K?>.

ID-01 Laser Scanner User’s Manual vii

Introduction

Warning and Caution Summary

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy, and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio communication. However,

there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna;

• Increase the separation between the equipment and receiver;

• Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected;

• Consult the dealer or an experienced radio/TV technician for help.

For connection to a UL-listed direct plug-in power unit marked Class II and rated 10 to 28

VDC at 5 watts or greater.

European models must use a similarly rated Class I or Class II power supply that is certified

to comply with standard for safety EN 60950.

Use of controls, adjustments, or performance of procedures other than those specified

herein may result in hazardous laser light radiation exposure.

There are no user-serviceable parts in the scanner. Opening the scanner voids the di-soric

Systems, Inc. warranty and could expose the user to laser diode power.

The laser beam can be harmful to eyesight. Avoid eye contact with the laser beam. Never

point the beam at other people, or in a direction where people may be passing.

viii ID-01 Laser Scanner User’s Manual

Warning and Caution Summary

Warning and Caution Summary (cont.)

The following label is located on side of the ID-01 Laser Scanner:

• Embedded Laser Diode - 650nm, 12mW

• Wavelength: 650nm

• Beam Divergence: 0.6˚(typ.)

• Pulse Duration: 38μs

• Maximum Power: 1mW

• Standard - IEC-60825-1 Ed. 2(2007)

Location of the ID-01’s laser aperture:

CAUTION: Use of controls or adjustments or performance of procedures other than those

specified herein may result in hazardous radiation exposure.

IMPORTANT: The ID-01 is intended for connection to a UL-listed direct plug-in power unit

marked Class 2 and rated 5 VDC at 3.5 Watts, or greater if using electrical accessories.

European models must use a similarly rated Class 1 or Class 2 power supply that is certified

to comply with standard for safety EN 60950.

Laser Aperture

ID-01 Laser Scanner User’s Manual ix

Introduction

Warning and Caution Summary (cont.)

Warning Label Placement

These labels are located on the ID-01 Laser Scanner:

xID-01 Laser Scanner User’s Manual

Statement of Agency Compliance

This device has been tested in accordance with IEC 60825-1 2nd ed., and has been certified

to be under the limits of a Class 2 Laser device.

The ID-01 has been tested for compliance with FCC (Federal Communications Commission)

regulations and has been found to conform to all applicable FCC Rules and Regulations.

To comply with FCC RF exposure compliance requirements, this device must not be co-located

or operate in conjunction with any other antenna or transmitter.

Changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

The ID-01 has been tested for compliance with CE (Conformité Européenne) standards

and guidelines, and has been found to conform to applicable CE standards, specifically

the following requirements:

Radiated Emissions: EN 55022:2006 Class A 30-1000 MHz

Conducted Emissions: EN 55022:2006 Class A .15-30 MHz

The ID-01 has been tested by an independent electromagnetic compatibility laboratory in

accordance with the applicable specifications and instructions.

The ID-01 is compliant with FDA performance standards for laser products except for

deviations pursuant to laser notice no. 50, dated June 24, 2007.

Altri manuali per ID-01

Indice

Altri manuali Di-soric Scanner

Di-soric

Di-soric ID-01 Manuale utente

Manuali Scanner popolari di altre marche

Plustek

Plustek Scanner Manuale utente

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuale utente

Renkforce

Renkforce DS100-5M Manuale utente

Image Access

Image Access WideTEK A2 Manuale utente

Canon

Canon imageFORMULA CR-120N Manuale utente

Fujitsu

Fujitsu FI-4860C2 Manuale utente

GeoSlam

GeoSlam ZEB Horizon Istruzioni per l'installazione

Kodak

Kodak i5800 Scanner Manuale utente

Kodak

Kodak i7300 Manuale utente

Revopoint

Revopoint POP Manuale utente

Fujitsu

Fujitsu fi-4860C Manuale utente

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuale utente

Faselase

Faselase F6 Manuale utente

Fujitsu

Fujitsu CardMinder Manuale utente

Uniden

Uniden BC340CRS Manuale utente

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuale utente

Mustek

Mustek PageExpress 4800 Pro Manuale utente

Optex

Optex 750830 Manuale utente