Dialoc ID MCQ-PRO Manuale utente

User Manual

Version 1.00

MCQ-PRO RFID Reader —Installation and Tuning Manual Version 1.00

Page 2 of 89

Dialoc ID makes no warranty of any kind with regard to this material, including, but not

limited to, the implied warranties of merchantability and fitness for a particular purpose.

Dialoc ID shall not be liable for errors contained herein or for incidental or consequential

damages in connection with the furnishing, performance, or use of this material.

Dialoc ID assumes no responsibility for the use or reliability of its equipment on equipment

that is not furnished by Dialoc ID.

Dialoc ID reserves the right to modify the software and hardware described in this manual at

any time without notice.

This manual covers the following items:

MCQ-Pro Controller

Last version date: April 2012

Manual versions:

Version 1.00: first release

MCQ-PRO RFID Reader —Installation and Tuning Manual Version 1.00

Page 3 of 89

Table of Contents

Publishing Note -----------------------------------------------------------------------------------6

Disclaimer and Limitation of Liability -----------------------------------------------------------------------------6

Important to know--------------------------------------------------------------------------------- 8

If you need assistance-----------------------------------------------------------------------------------------------8

Contact for Comments-----------------------------------------------------------------------------------------------8

Quality Issues----------------------------------------------------------------------------------------------------------9

1Overview------------------------------------------------------------------------------------- 10

2Installation----------------------------------------------------------------------------------- 11

2.1 Minimum System Configuration-------------------------------------------------------------------------11

2.2 Installation Procedure -------------------------------------------------------------------------------------11

3Getting Started ----------------------------------------------------------------------------- 13

3.1 Using DIALOC ID MCQ-Pro Wizard -------------------------------------------------------------------14

3.1.1 Selecting a Device -------------------------------------------------------------------------------------15

3.1.2 Setting up the Device ---------------------------------------------------------------------------------16

3.2 Examples of Read/Write Operations ------------------------------------------------------------------18

3.2.1 Reading UID of ISO 15693 Tags-------------------------------------------------------------------18

3.2.2 Reading or Writing ISO 15693 Tag Memory ----------------------------------------------------19

4DIALOC ID MCQ-Pro’s Workspace--------------------------------------------------- 22

4.1 Workspace Panel Arrangement-------------------------------------------------------------------------22

4.1.1 Moving panels-------------------------------------------------------------------------------------------22

4.1.2 Minimizing panels --------------------------------------------------------------------------------------23

4.1.3 Closing panels ------------------------------------------------------------------------------------------23

4.1.4 Restoring default panel layout ----------------------------------------------------------------------24

4.1.5 Switching workspace to full screen ----------------------------------------------------------------24

5Managing your RFID devices----------------------------------------------------------- 25

5.1 How to Manage your Favorite Devices----------------------------------------------------------------25

5.1.1 Adding a Favorite Device Using Device Discovery --------------------------------------------25

5.1.2 Manually Adding or Editing a Favorite Device --------------------------------------------------28

5.1.3 Connecting, Disconnecting and Rebooting a Device------------------------------------------28

5.1.4 Getting Device Information --------------------------------------------------------------------------29

5.1.5 Upgrading Firmwares ---------------------------------------------------------------------------------31

5.1.6 Managing Default Radio Configuration -----------------------------------------------------------33

5.1.7 Saving/Loading Device Configuration to/from Disk --------------------------------------------34

6Core Configuration ------------------------------------------------------------------------ 37

6.1 System Configuration--------------------------------------------------------------------------------------37

6.1.1 General Tab ---------------------------------------------------------------------------------------------37

6.1.2 Tests Tab ------------------------------------------------------------------------------------------------38

6.2 Communication Interfaces Configuration-------------------------------------------------------------39

6.2.1 Serial Port Tab 6.2.1 ----------------------------------------------------------------------------------39

6.2.2 USB Tab--------------------------------------------------------------------------------------------------39

6.2.3 Ethernet Tab---------------------------------------------------------------------------------------------40

6.3 Services Configuration ------------------------------------------------------------------------------------41

6.3.1 Heartbeat Tab-------------------------------------------------------------------------------------------41

6.3.2 StxNG Tab-----------------------------------------------------------------------------------------------41

7RF Channels Configuration------------------------------------------------------------- 42

7.1 RF Channels Configuration ------------------------------------------------------------------------------42

7.1.1 Default RF configuration------------------------------------------------------------------------------42

7.1.2 Multiplexer Configuration-----------------------------------------------------------------------------43

8Default Read-------------------------------------------------------------------------------- 46

8.1 Overview------------------------------------------------------------------------------------------------------46

8.2 Default Read Configuration ------------------------------------------------------------------------------46

8.2.1 General ---------------------------------------------------------------------------------------------------46

MCQ-PRO RFID Reader —Installation and Tuning Manual Version 1.00

Page 4 of 89

8.2.2 Reference List-------------------------------------------------------------------------------------------48

8.2.3 Events-----------------------------------------------------------------------------------------------------49

8.2.4 Read Mode ----------------------------------------------------------------------------------------------50

8.3 Radio Event Panels----------------------------------------------------------------------------------------52

8.3.1 Tag Read Events---------------------------------------------------------------------------------------52

8.3.2 New Tag Events----------------------------------------------------------------------------------------53

8.3.3 Tag In/Tag Out Events--------------------------------------------------------------------------------53

8.3.4 Raw Events----------------------------------------------------------------------------------------------54

8.4 Statistics panel----------------------------------------------------------------------------------------------55

9Tag Parameters and Commands------------------------------------------------------ 56

9.1 C210-----------------------------------------------------------------------------------------------------------56

9.1.1 Parameters tab -----------------------------------------------------------------------------------------56

9.2 C220-----------------------------------------------------------------------------------------------------------57

9.2.1 Parameters tab -----------------------------------------------------------------------------------------57

9.2.2 EAS and State tab -------------------------------------------------------------------------------------58

9.2.3 Memory tab----------------------------------------------------------------------------------------------59

9.3 I-Code 1 (C270)---------------------------------------------------------------------------------------------60

9.3.1 Parameters tab -----------------------------------------------------------------------------------------60

9.3.2 Memory and State tab --------------------------------------------------------------------------------61

9.4 ISO 15693----------------------------------------------------------------------------------------------------63

9.4.1 Parameters Tab ----------------------------------------------------------------------------------------63

9.4.2 Information and State Tab ---------------------------------------------------------------------------65

9.4.3 Memory tab----------------------------------------------------------------------------------------------67

9.4.4 Custom tab-----------------------------------------------------------------------------------------------68

9.5 I-Code ePC --------------------------------------------------------------------------------------------------69

9.5.1 Parameters tab -----------------------------------------------------------------------------------------69

9.5.2 Memory tab----------------------------------------------------------------------------------------------70

9.5.3 Destruction tab------------------------------------------------------------------------------------------71

9.6 I-Code UID ---------------------------------------------------------------------------------------------------72

9.6.1 Parameters Tab ----------------------------------------------------------------------------------------72

9.6.2 Memory Tab---------------------------------------------------------------------------------------------73

9.6.3 Destruction Tab-----------------------------------------------------------------------------------------73

9.7 I-Code SLI (C370)------------------------------------------------------------------------------------------75

9.7.1 Parameters Tab ----------------------------------------------------------------------------------------75

9.7.2 EAS tab---------------------------------------------------------------------------------------------------76

9.8 I-Code SLI-L/S (C370-L/S)-------------------------------------------------------------------------------76

9.8.1 Parameters Tab ----------------------------------------------------------------------------------------76

9.8.2 Password tab--------------------------------------------------------------------------------------------77

9.8.3 EAS tab---------------------------------------------------------------------------------------------------79

9.8.4 Security tab----------------------------------------------------------------------------------------------80

9.8.5 ePC tab---------------------------------------------------------------------------------------------------81

10 Using IO Sets------------------------------------------------------------------------------- 83

10.1 IO Sets Configuration--------------------------------------------------------------------------------------83

10.1.1 ISO Set Status------------------------------------------------------------------------------------------83

10.2 Input trigger and Output feedback----------------------------------------------------------------------83

11 Standalone Mode-------------------------------------------------------------------------- 84

11.1 Standalone mode configuration-------------------------------------------------------------------------84

11.1.1 Message format ----------------------------------------------------------------------------------------84

11.1.2 Miscellaneous Parameters---------------------------------------------------------------------------86

11.2 Enabling standalone mode-------------------------------------------------------------------------------86

12 Other Topics -------------------------------------------------------------------------------- 87

12.1 General Settings--------------------------------------------------------------------------------------------87

Application------------------------------------------------------------------------------------------------------------87

Communication------------------------------------------------------------------------------------------------------87

Device discovery----------------------------------------------------------------------------------------------------87

12.2 Analog signal capture -------------------------------------------------------------------------------------88

12.2.1 Capturing signal ----------------------------------------------------------------------------------------88

MCQ-PRO RFID Reader —Installation and Tuning Manual Version 1.00

Page 5 of 89

12.2.2 Capture and Display settings------------------------------------------------------------------------89

MCQ-PRO RFID Reader —Installation and Tuning Manual Version 1.00

Page 6 of 89

Publishing Note

Disclaimer and Limitation of Liability

All information herein is either public information or is the property of and owned solely by

DIALOC ID who shall have and keep the sole right to file patent applications or any other

kind of intellectual property protection in connection with such information.

Nothing herein shall be construed as implying or granting to you any rights, by license, grant

or otherwise, under any intellectual and/or industrial property rights of or concerning any of

DIALOC ID’ information.

This document can be used for informational, non-commercial, internal and personal use only

provided that:

the copyright notice below, the confidentiality and proprietary legend and this full

warning notice appear in all copies.

this document shall not be posted on any network computer or broadcast in any media and

no modification of any part of this document shall be made.

Use for any other purpose is expressly prohibited and may result in severe civil and criminal

liabilities.

The information contained in this document is provided “AS IS” without any warranty of any

kind. Unless otherwise expressly agreed in writing, DIALOC ID makes no warranty as to the

value or accuracy of information contained herein. The document could include technical

inaccuracies or typographical errors. Changes are periodically added to the information

herein. Furthermore, DIALOC ID reserves the right to make any change or improvement in

the specifications data, information, and the like described herein, at any time.

Therefore DIALOC ID assumes no liability and is not responsible for customer applications

or product or software that include DIALOC ID products.

DIALOC ID HEREBY DISCLAIMS ALL WARRANTIES AND CONDITIONS WITH

REGARD TO THE INFORMATION CONTAINED HEREIN, INCLUDING ALL IMPLIED

WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE,

TITLE AND NON-INFRINGEMENT. IN NO EVENT SHALL DIALOC ID BE LIABLE,

WHETHER IN CONTRACT, TORT OR OTHERWISE, FOR ANY INDIRECT, SPECIAL

OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER INCLUDING

BUT NOT LIMITED TO DAMAGES RESULTING FROM LOSS OF USE, DATA,

PROFITS, REVENUES, OR CUSTOMERS, ARISING OUT OF OR IN CONNECTION

WITH THE USE OR PERFORMANCE OF INFORMATION CONTAINED IN THIS

DOCUMENT.

DIALOC ID does not and shall not warrant that this product/system/equipment will be

resistant to all possible attacks, and shall not incur, and disclaims, any liability in this respect.

Even if each product is compliant with current security standards in force on the date of their

design, security mechanisms' resistance necessarily evolves according to the state-of-the-art in

security and notably under the emergence of new attacks. Under no circumstances shall

DIALOC ID be held liable for any third party actions, and in particular in case of any

successful attack against systems or equipment incorporating DIALOC ID products.

DIALOC ID disclaims any liability with respect to security for direct, indirect, incidental or

consequential damages that result from any use of its products. It is further stressed that

independent testing and verification by the person using the product is particularly

encouraged, especially in any application in which defective, incorrect, or insecure

MCQ-PRO RFID Reader —Installation and Tuning Manual Version 1.00

Page 7 of 89

functioning could result in damage to persons or property, denial of service, or loss of

privacy.

MS-DOS© and Windows© are registered trademarks of Microsoft Corporation.

Printed in the Netherlands.

DIALOC ID –Daltonstraat 42-44 3846BX Harderwijk, the Netherlands

Tel: +31 (0) 341 422 760 / Fax: +31 (0) 341 425 033

Document Reference: 1.0

MCQ-PRO RFID Reader —Installation and Tuning Manual Version 1.00

Page 8 of 89

Important to know

Welcome to the DIALOC ID RFID System. This is designed to help you get up and

running quickly using this high-quality Radio Frequency Identification (RFID) system.

It describes all you need to know about how to install and use the DIALOC ID system

and its associated applications.

It provides a step-by-step guide for the following procedures:

Installation of DIALOC ID MCQ-Pro Software

Using DIALOC ID MCQ-Pro Software with your RFID reader



This guide is designed for all DIALOC ID certified Business Partners.

This document requires familiarity with RFID technology.

Conventions

Symbol

Meaning

CAUTION: A note that advises users that a specific action could result in loss of

data or damage the hardware.

WARNING: Anote that advises users that a specific action may result in physical

harm.

A note that provides additional information that helps the user to perform a task or

to obtain the best performance from the product.

If you need assistance

Please contact your nearest DIALOC ID Business Partner or contact DIALOC ID at:

Telephone: +31 (0) 341 422 760

Fax: +31 (0) 341 425 033

E-Mail: [email protected]

Website http://www.dialocid.com

Contact for Comments

We welcome your feedback to help us provide high quality documentation.

For technical comments, please contact us on:

Telephone: +31 (0) 341 422 760

Fax: +31 (0) 341 425 033

E-Mail: [email protected]

Please remember to quote the Version of this Manual, your name, job title and your

company.

MCQ-PRO RFID Reader —Installation and Tuning Manual Version 1.00

Page 9 of 89

Quality Issues

DIALOC ID implements stringent quality controls at all stages of its manufacturing

process. However, should you find a defect with this product, please notify us using the

RMA form on our website www.dialocid.com.

Telephone : +31 (0) 341 422 760

Fax : +31 (0) 341 425 033

MCQ-PRO RFID Reader —Installation and Tuning Manual Version 1.00

Page 10 of 89

1 Overview

DIALOC ID MCQ-Pro software is a Windows application that demonstrates all the features

of the new MCQ-Pro reader. It also permits you to easily setup the reader, test it and perform

RFID reading and writing operations.

This document provides a step-by-step guide for the following procedures:

Installing MCQ-Pro software on your PC

Configuring and using MCQ-Pro software

Managing your RFID devices and upgrading their firmware

Performing RFID reading operations

Sending specific tag commands

Indice

Manuali Scanner popolari di altre marche

Plustek

Plustek Scanner Manuale utente

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuale utente

Renkforce

Renkforce DS100-5M Manuale utente

Image Access

Image Access WideTEK A2 Manuale utente

Canon

Canon imageFORMULA CR-120N Manuale utente

Fujitsu

Fujitsu FI-4860C2 Manuale utente

GeoSlam

GeoSlam ZEB Horizon Istruzioni per l'installazione

Kodak

Kodak i5800 Scanner Manuale utente

Kodak

Kodak i7300 Manuale utente

Revopoint

Revopoint POP Manuale utente

Fujitsu

Fujitsu fi-4860C Manuale utente

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuale utente

Faselase

Faselase F6 Manuale utente

Fujitsu

Fujitsu CardMinder Manuale utente

Uniden

Uniden BC340CRS Manuale utente

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuale utente

Mustek

Mustek PageExpress 4800 Pro Manuale utente

Optex

Optex 750830 Manuale utente