INTRODUCTION
This manual guarantees the safe and ecient use of the machine. This
manual is part of the machine and has to always be kept near the machine
and be accessible for the operating personnel at all times.
The operating personnel have to have carefully read and understood this
manual before any work commences. Prerequisite for safe working is the
compliance with all the safety and handling instructions in this manual.
Furthermore, the local accident prevention regulations and the general
safety conditions for the use of the machine are applicable.
Illustrations in this manual are for the purpose of explanation and may
dier from the actual design of the machine.
When passing the machine on to third parties this manual must be includ-
ed. All of the instructions and technical specications in this manual have
been written in compliance with current technical norms and regulations
together with our many years of knowledge and experience.
Disclaimer: DiamaPro® Systems and its aliates take no responsibility
for any damage, injury or death resulting from the incorrect or unsafe use
of this product. Use of this product should be undertaken by competent
persons only. It is the operator’s responsibility to ensure that the following
safety procedures are followed. If you are unsure, do not operate this
product.
IT IS THE OPERATORS RESPONSIBILITY TO READ THIS MANUAL
AND USE THE MACHINE IN A SAFE MANNER: Failure to follow written
instructions and warnings symbols depicted in this instruction manual and
on the machine may result in serious injury or death for the user and other
persons. Read, understand and follow all the instructions, warnings, and
general safe work practices, which are depicted on the machine and in the
instruction manual at all times.
Always disconnect machine from power before servicing.
Maintenance, replacement or adjustment of parts can cause
serious injury or death to the user or other persons, if the machine
is connected to the power supply while servicing.
Keep the cable away from the blade to avoid damaging the cable.
DO NOT run over or damage the power cord, this can cause a
dangerous electric shock.
The machine is constructed for use in dry environments only.
Danger of electric shock. Do not expose the machine to water or
rain.
Connect to 120V AC power only.
Connecting the machine to an incorrect power supply can cause
damage to the machine and injury to the user and persons in
proximity.
1. SAFETY
1.1. Electrical Safety
Extension Cord– Only use machine with 12 gauge or larger
and 50’ or less length of cord.
Use of extension cords that are too small or too long can cause
dangerous overloading of the cord and machine resulting in poten-
tial re and electrical hazards.
Electrical cables and plugs must be kept in good condition
and replaced by trained electrical technicians when damaged
. Whether it is due to normal wear or abuse electrical cables and
plugs can wear out and expose operators and persons in proximity
to danger of electrocution or burn. Inspect all electrical cables and
plugs before use, worn or damaged electrical cables and plugs
must be replaced by a trained electrical technician.
Never operate with a damaged cable or plugs.
Replacement of worn or damaged cables or plugs must be
completed by a qualied person.
Improperly connecting the grounding wire can result in risk of
electric shock.
Check with a qualied electrician if you are in doubt as to whether
the outlet is properly grounded. Do not modify the plug on the
machine. Never remove the grounding prong from the plug or ex-
tension cords. Do not use the tool if the cord or plug is damaged.
If the plug will not t the outlet, have a proper outlet installed by a
qualied electrician.
Do not use machine when cable is damaged. Do not move the
machine by dragging the cable. Utilization with a damaged cable
can cause an electric shock.
The operator has to be instructed to the use of the machine
before operating.
Failure to observe the information in this instruction manual before
use, adjustment or maintenance could cause serious injury to
persons or property.
Read all security statements. Be sure that data plate and
warning labels are mounted / xed to the machine.
Operator and persons in proximity must wear proper personal
protective equipment including eye-protection, ear protection,
closed toe shoes, N95 minimum dust mask and hearing
protection. Removal of ooring materials and performing main-
tenance on machine can cause hazardous ying debris, airborne
dust, hazardous debris on walking surfaces, and loud noises.
Keep arms, feet and clothes away from the operating machine
parts.
Moving parts of the machine can cause serious injury or damage.
Operator must know what type of material is being removed.
Flooring can be composed of material that is harmful to be
exposed to, especially in the form of air born dust. Some of these
dangerous materials including asbestos and lead must not be
removed by machine and must only be re-mediated by licensed
professionals.
SPARE PARTS
Only use original spare parts and accessories specially made
for this machine. DO NOT USE NON ORIGINAL EQUIPMENT
MANUFACTURES PARTS FOR REPLACEMENT. Failure to use
original parts can cause early failure or potentially dangerous fail-
ures or operating conditions. The manufacturer assume no liability
for damages / injury caused by after-market parts.
When replacing spare parts or electrical components, the technical
data specied by the manufacturer must be observed and original
spare parts must be used. Do not use machine if connecting ca-
bles or components are not in good operating condition.
WORK SAFETY
The scraper SCR-84 is built according to the state of the art and
the recognized safety-technical rules and must only be used for its
intended purpose in safe working environment.
Mandatory Action
Warning/Caution
General Safe Condition
Prohibited Action
1.2. Operator Warnings
1.3. Usage
