Diamond Audio Technology D342i Manuale utente
Product Owners Manual
SPEAKER SYSTEMS
SERIAL NUMBER:
DATE OF PURCHASE:
©007 Diamond Audio Technologies, LLC
SPECIAL THANKS
Dear Valued Customer,
Thank you for choosing Diamond D3 speakers. These speakers represent the latest advances in
acoustic technology, and like all Diamond products, are hand built and tested in our own factory,
using the highest grade components and state of the art techniques. When installed properly, they
will provide many years of accurate sound reproduction.
Please keep in mind that prolonged exposure to sound pressure levels in excess of 100 dB can cause
permanent hearing loss. This high performance speaker system can exceed that level, so please
exercise restraint in its operation in order to preserve your ability to enjoy its delity in the future.
Because of their exible installation possibilities, please consider having your new speakers
professionally installed by an authorized Diamond Audio dealer. This will assure a clean and efcient
installation, and extend your one year warranty to three years.
At Diamond, we strive to bring honest value and excellent quality to all of the speakers we build. By
your purchase of this product, you have joined the growing family of discerning listeners who demand
only the best. Welcome!
The Diamond Audio Team
©007 Diamond Audio Technologies, LLC
FEATURES
• Textured Copolymer Cones
• Foam Surrounds
• Heavy Gauge Proprietary Frames
• Flat Progressive Spider
• Extended Pole Motor Design
• Rubber Boot Magnet Protector
• Aluminum Dome Tweeters with Ferro Fluid Cooling
• Model Specic Crossovers
• Shallow Mount
D3 INTEGRATED SPEAKER SYSTEMS
Parts List - D342i, D352i, D362i, D372i, and D392i
(2) D3 Coaxial Speakers
(2) D3 Grills w/ Mounting Ring (except D372i)
(2) Mounting Gaskets
(1) Mounting Hardware Kit
(2) 4” x 6” Adapter Plates (D342i only)
On-board Crossovers
Each D3 coaxial features an on-board 12 dB/octave crossover and tweeter protection to ensure
absolute delity and protection during audio reproduction.
Standard Connection
D3 integrated systems are shipped congured for a single channel per speaker. Simply connect the
speaker wire from the source to the exposed positive and negative terminals on the speaker.
Bi-amp Connection
An exclusive feature of the D3 integrated systems is the option to power the tweeter and mid-bass
driver separately. This feature is called Bi-amping and all D3 coaxials can be bi-amped except D342i.
This ability allows for external active lter, phase, and time alignment for each of the drivers indepen-
dently. To bi-amp the speaker, remove the two jumper leads from the tweeter terminals on the speaker
and connect separate power to the woofer and tweeter terminals.
©007 Diamond Audio Technologies, LLC
MID-BASS SPEAKER MOUNTING
The illustration below shows the parts included and correct mounting assembly of the D3 integrated
and component mid-bass drivers. Mounting ring and grill are optional.
©007 Diamond Audio Technologies, LLC
D3 COMPONENT SPEAKER SYSTEMS
Parts List - D342, D352, and D362
(2) D3 Mid-Bass Speakers
(2) D3 Grills w/ Mounting Rings
(2) Mounting Gaskets
(2) D3 12dB Crossovers
(2) D3 Tweeters in Flush Mount Cups
(2) D3 Tweeter Surface Mounting Cups
(1) Mid-Bass Mounting Hardware Kit
(1) Tweeter Mounting Hardware Kit
Tweeter Mounting
When ush or surface mounting tweeters, make
sure desired location can accommodate the
hole sizes and depth required. Mount cup using
provided hardware, ush mount illustration shown
on right. Mount surface cup at desired angle with
provided screws in tweeter mounting kit. Snake
speaker wires through tweeter cup, connect tweeter to wires, and snap tweeter into cup by aligning
the notches. Be careful not to push on the center of the tweeter grill.
Crossover Programming
Each D3 component set comes with a pair of model specic programmable crossovers. Under the clear
cover there are two jumpers, one marked “TWEETER” and one marked “AXIS”. -2 dB tweeter attenua-
tion can be achieved by moving the “TWEETER” jumper to the -2dB position. The default “reference”
position has no attenuation effect on the tweeter or is 0dB. The “AXIS” jumper swaps the tweeter
phase 180 degrees. The default position is “off axis” for mounting in dash boards, doors, and a-pillars.
The “on axis” position is for tweeter positions that re directly at the listening area like in custom
kick pods.
RAF Outputs
Each D3 Component crossover has a third set of outputs marked “RAF”. This stands for Rear Acoustic
Fill. This output can be used to power an additional speaker off the same channel without affecting
the impedance load on the source unit. This output allows 15-20% of the total power to the extra
speaker and is unltered or full range.
©007 Diamond Audio Technologies, LLC
COMPONENT SYSTEM CONNECTION
The following illustration shows how to connect one channel of the D3 component system.
Parameter (unit) D/i D/Di D/Di D./D.i D7i D9i
Sensitivity 88 89.5 90.5 91 91 91.5
Qts 0.9 0.73 0.92 1.0 1.0 1.3
Fs (Hz) 78 75 62 65 80 62
Vas (L) 4.8 7.1 11.5 16 11.5 17.4
Re (ohm) 3.5 3.6 3.6 3.6 3.5 3.6
Xmax (mm/N) 2 2.5 3.5 4 4 4
Impedance (ohm) 4 4 4 4 4 4
Power (Watts)
Nom/Max
25/50 45/90 60/120 60/120 60/120 75/150
THIELE/SMALL PARAMETERS
Dimension (Inches)
D/i D/Di D/Di D./
D.i
D7i D9i DTAK
Total Diameter (A)
4.3 5.6 6.25 6.5 5.6 x 8.7 1.73 1.73
Mounting Diameter (B)
3.94 4.68 5.35 5.35 4.9 x 7.1 4.9 x 8.4 1.62
Screw Hole Diameter (C)
4.5 5.24 5.9 6.1 4.3 x 4.6 4.7 x 6.6 N/A
Mounting Depth (D)
1.8 2.26 2.26 2.3 2.31 2.8 .05
Magnet Diameter (E)
2.83 3.1 3.3 3.3 3.1 4.2 N/A
7
©007 Diamond Audio Technologies, LLC
Dimension (Inches)
D/i D/Di D/Di D./
D.i
D7i D9i DTAK
Total Diameter (A)
4.3 5.6 6.25 6.5 5.6 x 8.7 1.73 1.73
Mounting Diameter (B)
3.94 4.68 5.35 5.35 4.9 x 7.1 4.9 x 8.4 1.62
Screw Hole Diameter (C)
4.5 5.24 5.9 6.1 4.3 x 4.6 4.7 x 6.6 N/A
Mounting Depth (D)
1.8 2.26 2.26 2.3 2.31 2.8 .05
Magnet Diameter (E)
2.83 3.1 3.3 3.3 3.1 4.2 N/A
PHYSICAL DIMENSIONS
©007 Diamond Audio Technologies, LLC
LIMITED SPEAKER WARRANTY STATEMENT
Diamond Audio Technologies, LLC (DAT) warrants this product to be free from defects in material and workmanship for a
period of one (1) year from the original date of purchase provided it was purchased from an authorized DAT retailer within the
United States. However, if this product was installed by the authorized DAT retailer, the warranty period will be extended to
three (3) years.
THIS WARRANTY IS NOT TRANSFERABLE AND APPLIES ONLY TO THE ORIGINAL PURCHASER OF THIS PRODUCT IN ITS ORIGINAL
INSTALLATION. Original purchaser must reside in the United States and be able to provide proof of purchase and installation
with the sales receipt from the authorized DAT retailer that sold and installed the product.
Should a manufacturing defect occur during above said warranty period, DAT will replace or repair the defective product with
a product of the same or equivalent value and performance.
Damage or failure caused by any of the following is not covered under this warranty policy: negligence, improper use, abuse,
product modication, unauthorized repair attempts, accident, acts of God, misrepresentations by DAT retailers, and improper/
inadequate packaging during return shipping.
Warranty is void if serial numbers have been removed, altered or defaced.
HOW TO OBTAIN WARRANTY SERVICE
In the event a DAT product should require service, you should visit the authorized DAT retailer you purchased the product from
and they can expedite your claim. All claims must fall into the guidelines listed above and be accompanied by a copy of the
original sales and installation receipt from that authorized DAT retailer.
Product returned for warranty service must be freight-prepaid, properly packaged and clearly marked with the Return
Authorization (RA) number issued by DAT. Any product returned to DAT that is improperly packaged, does not have a RA
number clearly marked on the package, or never received a RA number may be refused upon delivery. DAT does not assume
responsibility for lost or misdirected product.
Repair or replacement under this warranty is the exclusive remedy of the consumer. DAT shall not be liable for any incidental
or consequential damages for breach of any expressed or implied warranty on this product. Some states do not allow the
exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so
the above limitations or exclusions may not apply to you. This warranty gives you specic legal rights and you may also have
other rights that may vary from state to state.
Customers outside the United States should contact their local sales ofce to obtain information on pricing, exchange unit
availability, instructions, service and warranty/non-warranty replacement or repair.
Diamond Audio Technologies, LLC
6965 S. Priest Drive Suite 5
Tempe, AZ 85283 USA
Tel: 480.813.6200
Fax: 480.813.6210
Web: diamondaudio.com
Service/Tech Support:
Toll Free 1-866-328-2834
Tech Support Email
techsupport@diamondaudio.com
Questo manuale è adatto per i seguenti modelli
4
Indice
Altri manuali Diamond Audio Technology Sistema di altoparlanti
Manuali Sistema di altoparlanti popolari di altre marche
Sondpex
Sondpex Active Speaker System and Digital Music... Manuale utente
JVC
JVC NX-PN7 Manuale utente
Marshall Amplification
Marshall Amplification AR-DM61-BT Manuale utente
Yamaha
Yamaha NX-A01 - Speaker Sys Manuale utente
SE Audiotechnik
SE Audiotechnik I-LINE Manuale utente
Gemini
Gemini WRX-843 Series Manuale utente