diamond mowers FLAIL MOWER Manuale utente
350 EAST 60TH ST. N. • SIOUX FALLS, SD 57104
800.658.5561 • 605.977.3300
WWW.DIAMONDMOWERS.COM
PARTS 888.960.0361
WARRANTY + SERVICE 888.960.0364
OPERATOR’S MANUAL
350 EAST 60TH ST. N. • SIOUX FALLS, SD 57104
800.658.5561 • 605.977.3300
WWW.DIAMONDMOWERS.COM
PARTS 888.960.0361
WARRANTY + SERVICE 888.960.0364
OPERATOR’S MANUAL
SKID-STEER / COMPACT TRACK LOADER
FLAIL MOWER
PRODUCT INFORMATION
Record the model and serial number of your unit here. When calling for
warranty, service, or parts, you may be asked to provide this information,
in order to ensure fast, accurate service.
MODEL: Flail Mower SIZE: 75”(1905mm) 90”(2286mm) 102”(2591mm)
SERIAL NUMBER: ________________________________________________
©2018 Diamond Mowers, LLC
All rights reserved.
Any failure to read, understand and follow the instructions found in this operator’s
manual could lead to serious injury. Operators who choose to operate this equipment
without following instructions, or who choose to operate this equipment in a manner
inconsistent with the recommendations set forth in this manual, do so at their own
risk and assume the risk of injury. Diamond Mowers will not be liable for an owner
or operator’s loss, damage, or injury due to the misuse of the equipment, failure to
understand the inherent risks, or inability to properly operate the equipment.
FLAIL MOWER OPERATOR’S MANUAL
(circle one)
Provisional Patents: 62/484,363
2
WELCOME!
Thank you for choosing Diamond Mowers, and welcome to your Skid-Steer /
Compact Track Loader Flail Mower. Before you begin operating, we encourage
you to look through this manual to review the proper maintenance and
operating techniques that will keep you, and your equipment, safe — while
ensuring you the most productive flail mower in the market.
We have nothing but respect and admiration for you. Our job at Diamond is
to provide you with the toughest, most reliable and safest equipment that
will allow you to do your job better. That also means being there when you
need us.
CONTACT US:
Parts: 888.960.0361 | [email protected]
Main Office: 800.658.5561 | 605.977.3300
Website: www.diamondmowers.com |Email: info@diamondmowers.com
Your time is important to us.
We guarantee that Genuine Diamond Parts will ship within 72-hours of the
order being placed or the parts and shipping are free.
Your satisfaction is guaranteed.
If you are not completely satisfied with your new Diamond in the first
30-days, we will buy it back. No questions asked.
Thanks again for choosing Diamond.
If at any time your needs are not being met by our team, please feel free
to call me direct.
Tim Kubista
VP Sales & Marketing
651.955.6665
OWNER REGISTRATION
In your welcome packet you should have received a warranty registration
form. Complete and return this form to our main office.
If you’d rather complete this info online, go to:
http://info.diamondmowers.com/register-my-product
Returning your registration information to Diamond will help us process any
warranty claims quickly and efficiently – so you can get back to work, fast.
TRANSFERRED OWNERSHIP
If you have acquired this flail mower from a previous owner, we encourage
you to register your equipment online. By registering your Diamond Mowers
unit, you’ll stay informed on product advancements, offers and service alerts.
Register by going to: http://info.diamondmowers.com/register-my-product
We honor our equipment’s warranty from the date it was put into service,
no matter who’s in charge of running it.
For any questions, contact our Warranty / Service team at:
888.960.0364 or 605.977.3300
warrant[email protected]
FLAIL MOWER OPERATOR’S MANUAL
4
REAR SWING FLAIL OPERATOR’S MANUAL
This attachment is designed to be used for mowing and light brush
management applications.
This includes:
•Cutting grass.
•Mulching light brush.
•Cutting a maximum of 2” (51mm) material continuously.
This attachment should only be used in an area free of obstructions and
bystanders. Any use on non-vegetative material, or in an area that is not
clear of persons and property, is strictly prohibited. Any use outside of the
aforementioned application is considered contrary to its intended use. Any
damage that may occur as a result of misuse will void warranty as stated in
Diamond Mowers’ warranty policy.
INTENDED USE
Do not operate this unit without first reading the safety precautions
and operating instructions in this manual.
6
TAKE A LOOK AROUND
Let’s get started by doing a quick walk around
of the Skid-Steer / Compact Track Loader Flail.
KNIVES
The cutting shaft is equipped with
our heavy duty brush and grass
blades for a smooth, even cut.
BELT DRIVE
All of our heavy duty flails use
a high strength belt with an
automatic self-tensioner; no
manual adjustment needed.
HYDRAULIC MOTOR
Our flail mower is equipped with a
high flow / high efficiency hydraulic
motor matched to your skid-steer /
compact track loader.
HOSES
Shipped with quick couplers and a
case drain line with both male and
female ends.
BEARINGS
For ultimate long life and reliability,
our flail cutting shafts and ground
rollers are equipped with the best
bearings in the industry.
7
GETTING STARTED
FLAIL MOWER OPERATOR’S MANUAL
CONTINUED ON NEXT PAGE
HIGH FLOW MACHINE
Diamond’s flail mower must be used on a
high flow machine capable of 32-45 GPM
(122-171 LPM) and have a case drain.
SHATTER RESISTANT ENCLOSURE
A shatter resistant enclosure is
REQUIRED! This product must not be
used without a shatter resistant cab
enclosure. Debris can fly back at the cab
and cause injury.
QD COUPLERS
The case drain line must be properly
connected or you will damage your
hydraulic motor. The case drain line
will come equipped with both male and
female QD couplers.
•Install the QD coupler(s) that
matches the machine.
•Attachment is shipped with 1/2”
flat face connectors, which are a
common size for most skid-steer /
compact track loaders.
QUICK ATTACH
The flail mower will mount onto the front
of the skid-steer / compact track loader
quick attach plate in place of a bucket
or other implements.
8
FLAIL MOWER OPERATOR’S MANUAL
•Clean connections before attaching
to prevent contamination.
•The pressure(1), return(2), and case
drain(3) hoses from your flail mower
are identified in the illustration
at left.
•Make sure the hose length outside
of the bracket(4) is long enough for
the head to make a full range of
motion, but not so long that the
hose can pinch.
•Start machine at low idle and verify
that the cutting shaft is spinning in
“Reverse” rotation.
◦NOTE: “Forward” rotation is
defined as blade rotation the
same as the skid-steer / compact
track loader tires when driving
forward. “Reverse” rotation is
the opposite.
◦If the cutting shaft is spinning in
“Forward” rotation, either inverse
the flow from your machine, or
switch the QD couplers on the
pressure(1) and return(2) hoses.
(4)
(1) (3) (2)
9
FLAIL MOWER OPERATOR’S MANUAL
OPERATING YOUR FLAIL MOWER
Before you operate, note that the primary responsibility for safety on this
equipment falls to the operator. Only trained individuals who have read and
understood this manual should operate this unit.
If any portion of this manual is not understood, contact Diamond Mowers’
Service/Warranty at 888.960.0364 or 605.977.3300.
SAFETY TIPS
Be sure to read all warnings carefully. They are included for your safety,
and for the safety of others working with you.
•Always wear proper safety glasses, goggles, or a face shield
when operating.
•DO NOT operate this unit without a shatter resistant cab enclosure
installed on your skid-steer / compact track loader; this unit will cause
flying debris.
•Block off work area from bystanders, livestock, etc.
•Bystanders must keep a distance of 300’/100m from the unit
when operating.
CONTINUED ON NEXT PAGE
Indicates where MINOR injury COULD result if instructions are
not followed.
Indicates where SERIOUS injury or death COULD result if instructions
are not followed.
Indicates where SERIOUS injury or death WILL result if instructions are
not followed.
Indicates a property damage hazard ONLY, no PERSONAL injury.
10
Altri manuali per FLAIL MOWER
1
Indice
