Diasonic DPD-10 SERIES Manuale utente
We appreciate for purchasing our USB Hard Drive.
Before using it, please read this User's Guide
carefully and retain it for future reference.
USER'S GUIDE USB HARD DRIVE DPD-10 SERIES
INFORMATION TO THE USER
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one more of the following measures:
-. Reorient or relocate the receiving antenna.
-.Increase the separation between the equipment and receiver.
-. Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-.Consult the dealer or an experienced radio/TV technician for help.
WARNING
Changes or modifications not expressly approved by the manufacturer
could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operations.
FCC ID : P7K-DPD
1. Before Use................................................................................2
2. Parts .........................................................................................3
3. What is USB Hard Drive?..........................................................4
4. Installation / Remove of USB Hard Drive
Windows ME, Windows 2000 and Windows XP
......................................5
Windows 98 and Windows 98 SE
......................................................6
Mac OS 9.0 and higher
.................................................................11
5. FAQ.........................................................................................12
6. Specification
................................................................................16
7. Warranty Information
..
..................................................................17
INDEX
2
Before use, please be fully aware of this User's Guide.
This user guide is explaining and informing users to operate it in correct way so
that users can avoid potential damage in property and safety.
- Caution
Please do not use or place the product at the below circumstance,
it will cause trouble of the device.
1. Do not put it in location getting influenced of strong vibration or shock.
2. Much dust or high humidity place (Like Bathroom).
3.
Do not put it in location being much change in temperature (very high or very low).
4. Do not put it in location with Static electricity.
5. Do not put it in location getting strongly influenced of Electric wave and
magnetic wave
6.
Please be careful that any alien substance does not go into USB port and Plug.
7. Do not remove USB Hard Drive from USB port or give shock while writing or
reading data. It will cause to damage data.
8. Please understand and notice we shall not be under any responsibility for
any damaging data registered in this device.
- Warning
1. Do not repair, open or remodel the product by yourself.
2. Please power off computer and remove power cable from PC if there were
any smoke, strange smell or sound from the device.
3. Please do not pull it by force, drop it or place heavy thing on it.
4. Please do not use and touch when it gets wet with water, oil or any liquid.
There will be danger of electronic spark.
5. Please be fully aware of this user guide before using it. It will cause trouble of
the device and damage in property and safety.
Before use
3
1.
Cap
2.
USB PLUG
3.
LED Indicator
4. Writing Protector Switch: Before you insert the product into USB port,
please select the switch.
Caution: While the product is being plugged in USB port, the switch
does not work
5.
Neck Strap Hole
Parts
(1) (2)
(3) (4) (5)
4
To use USB Interface and Flash Memory, it is portable and mass
capacity storage device that allows to storage and transport data in
easy and quick way. Just plugging it into USB port, you are able to
read and write data. As electricity supplied from USB port of PC,
there is no need of battery or extra power supply for USB Hard Drive.
USB Hard Drive operates in P & P (Plug-N-Play), you can use it
Window ME, Window 2000, Window XP as well as Mac 9.0 and
higher without installing new drivers.
Please make sure it before using USB Hard Drive.
USB Hard Drive was already formatted in FAT. You can use it without
formatting. USB Hard Drive operates in the following Operating System.
Please check computer whether supporting USB interface and what
OS is.
Note
In Operating System of Windows ME, 2000, XP, MAC 9.0 and
higher, USB Hard Drive operates with Hot Plug. But users of
Windows 98 or 98 SE can install necessary drivers from
"Installation CD" provided with this product.
In case you lost CD-Rom or it was broken, please download from
our website www.diasonic.com and install it.
Please note Window NT does not support “Mass Capacity storage
Device” be geared with USB Port.
What is USB Hard Drive?
Remarks
No need New Driver
Need to install New Driver
Operating System
1. Windows ME
2. Windows 2000 & XP
3. Mac OS 9.0 and Higher
Windows 98 & 98 SE
5
Windows ME, Windows 2000 & Windows XP OS
1. Please Start your OS (Windows ME, Windows 2000 or
Windows XP).
2. Uncover the Cap from the device, and then insert it into USB
port on your PC or Notebook. Just to plug, your PC will
discover USB Hard Drive by itself and will install the necessary
drivers automatically. After the first installation, it is unnecessary
to install again.
3. LED indicator light, Green light is blinking when USB Hard
Drive is connecting to computer. Click "my computer,
"Removable Disk" will appear in "my computer" folder.
4. You can read, write and delete files in the same way as any
other drives like Hard Drive and Floppy Diskette.
Remove USB Hard Drive from USB Port.
1. First, close file or folder being used.
2. Click the icon from your "Task Manager" located in the lower
left of your task bar. You can see a tool bar name "Stop USB
Mass Storage Device - Drive (E:)", Click this tool bar
Installation / Remove of USB Hard Drive
6
3. "Safe to Remove Hardware" will appear, please click "OK".
4. Then, you can remove USB Hard Drive from the USB Port.
- Caution
When Red Light of LED Indicator is blinking, please do not
remove USB Hard Drive from USB Port. It will cause to loss,
break data or damage FAT table.
If the above happened and error message was found, please
format(Quick format) it again. Then you can use it.
Windows 98 & Windows 98 SE OS
If Operating System is Windows 98 & Windows 98 SE, you can
install the necessary drivers from "Installation CD" we provide
along with this product.
USB Installation
1.
Please start your OS (Windows 98 or Windows 98 SE).
7
2. Uncover the Cap from the device, and then insert it into USB
port on your PC or Notebook.
3. The following Dialog Box "Add New Hardware Wizard" will
appear in your PC. Click "Next"
4. The following Dialog Box will appear. Select "Search for the
best drive for your device. [Recommend], and then click "Next"
5. Please put "Installation CD" into CD-Rom.
8
6. The Following Dialog Box will appear. Please select "CD-ROM
drive" and then click "Browse...(R)".
7. Please find CD "Data Bank", select the folder named "Driver"
as below, and then click "OK".
Questo manuale è adatto per i seguenti modelli
1
Indice
