DIEBOLD NIXDORF WL-01 Manuale utente
Modular Waiter Lock
Reader
User Manual
We would like to know your opinion on this publication.
Please send us a copy of this page if you have any constructive criticism.
We would like to thank you in advance for your comments.
With kind regards.
Diebold Nixdorf Pte Ltd
Research and Development
151 Lorong Chuan
New Tech Park #05-01A/B
Singapore 556741
E-Mail: manuals.hardware@dieboldnixdorf.com
Order-No.: 01750276702 D
Your Opinion:
Modular Waiter Lock
Reader
User Manual
Edition September 2018
Contents
Manufacturer’s Declaration And Approval .....................................1
Supplier’s Declaration of Conformity .............................................2
Warranty........................................................................................3
About This Manual.........................................................................4
About the Device............................................................................5
The parts in the kit .........................................................................6
Software installation ......................................................................7
Programming guide........................................................................8
Commands .........................................................................................8
Enable........................................................................................8
Disable.......................................................................................8
Read Key ID ...............................................................................9
Read Config ...............................................................................9
Status ......................................................................................10
Command/Response Formats..........................................................10
Command Format ...................................................................10
Status definition ......................................................................11
Using the Modular Waiter Lock Reader........................................13
Installation of the reader .................................................................13
Via fasteners (provided)..........................................................13
Via screws ...............................................................................14
Connect and use...............................................................................15
Cleaning instructions........................................................................15
Technical Data..............................................................................16
External dimensions (in mm) ...........................................................16
Abbreviations...............................................................................17
Note: ® 1-Wire and iButton are registered trademarks of Maxim Integrated
Waiter Lock Modular Reader User Manual 1
Manufacturer’s Declaration And Approval
General Authorization
This device complies with the requirements of the di
rective 2014/30/EU with regard to “Electro-magnetic
Compatibility” and 2014/35/EU "Low Voltage
Directive" and RoHS directive 2011/65/EU.
Therefore, you will find the CE mark on the device or packaging.
FCC-Class A Declaration
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the
interference at his own expense.
Modifications not authorized by the manufacturer may void users
authority to operate this device.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation.
CAN ICES-3 (A)/NMB-3(A)
Note: ® 1-Wire and iButton are registered trademarks of Maxim Integrated
Waiter Lock Modular Reader User Manual 2
Supplier’s Declaration of Conformity
Product Description: I-Button
Model: BA9x WL
Party issuing Supplier’s Declaration of Conformity
Diebold Nixdorf Singapore PTE. LTD.
151 Lorong Chuan New Tech Park #05-01 A/B
Singapore 556741
Phone: +65 6747 3828
Responsible Party –U.S. Contact Information
Diebold Nixdorf
5995 Mayfair Road
N. Canton, OH 44720 / USA
Phone: +1 330 490 5049
FCC Compliance Statement (for products subject to Part 15)
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Waiter Lock Modular Reader User Manual 3
Note: ® 1-Wire and iButton are registered trademarks of Maxim Integrated
Warranty
Diebold Nixdorf guarantees generally a warranty engagement for 12
months beginning with the date of delivery. This warranty engagement
covers all those damages which occur despite a normal use of the product.
Damages because of
improper or insufficient maintenance,
improper use of the product or unauthorized modifications of the
product,
inadequate location or surroundings
will not be covered by the warranty.
For further information of the stipulation look at your contract.
All parts of the product which are subject to wear and tear are not
included in the warranty engagement.
Please order spare parts at the Diebold Nixdorf customer service.
4 Waiter Lock Modular Reader User Manual
Note: ® 1-Wire and iButton are registered trademarks of Maxim Integrated
About This Manual
This manual informs you about everything you might need to know how to
use the Modular Waiter Lock Reader.
Notes in the manual are marked by this symbol.
This symbol is used for warnings.
Waiter Lock Modular Reader User Manual 5
Note: ® 1-Wire and iButton are registered trademarks of Maxim Integrated
About the Device
The Modular Waiter Lock is a magnetic reader for the reading of magnetic
ID-type iButton®. One common application is as an access control device to
POS terminal where each operator is assigned an ID iButton® with a unique
64-bit ID. The strong magnetic receptacle of the device pulls the iButton®
into position and quickly establishes electrical contact with the probe.
Setting up of the device is easy. Simply connect to any standard USB port
of the system and secure the device to the counter-top by either the
adhesive fasteners or using screws.
6 Waiter Lock Modular Reader User Manual
Note: ® 1-Wire and iButton are registered trademarks of Maxim Integrated
The parts in the kit
The kit contains the following:
Parts
Description
Quantity
Waiter lock reader
1
Fasteners
2
Indice
