Digi-tech BASS MULTI CHORUS Manuale utente

Bass Multi Chorus Manual 8/20/02 10:43 AM Page 1

Warning

For your protection, please read the following:

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Do not use this apparatus near water.

5. Clean only with dry cloth.

6. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

7. Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

8. Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

9. Unplug this apparatus during lightning storms or when

unused for long periods of time.

10. No user serviceable parts inside. Refer all servicing to

qualified service personnel. Servicing is required when

the apparatus has been damaged in any way, such as

power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does

not operate normally, or has been dropped.

11.WARNING:To reduce the risk of fire or electric

shock, do not expose this apparatus to rain or

moisture.

12. Refer to labels on the unit, including bottom cover, or

other markings and pertinent information.

DECLARATION OF CONFORMITY

Manufacturer’s Name: DigiTech

Manufacturer’s Address: 8760 S. Sandy Parkway

Sandy, Utah 84070, USA

declares that the product:

Product name: Bass Multi Chorus

Product option: all (requires Class II power

adapter that conforms to the

requirements of EN60065,

EN60742, or equivalent.)

conforms to the following Product Specifications:

Safety: IEC 60065 (1998)

EMC: EN 55013 (1990)

EN 55020 (1991)

Supplementary Information:

The product herewith complies with the requirements of the

Low Voltage Directive 72/23/EEC and the EMC Directive

89/336/EEC as amended by Directive 93/68/EEC.

Vice-President of Engineering

8760 S. Sandy Parkway

Sandy, Utah 84070, USA

Date:August 12, 2002

European Contact: Your local DigiTech Sales and

Service Office or

Harman Music Group

8760 South Sandy Parkway

Sandy, Utah

84070 USA

Ph: (801) 566-8800

Fax: (801) 568-7583

Bass Multi Chorus Manual 8/20/02 10:43 AM Page 2

WARRANTY: We at DigiTech are proud of our products and back-up each one with the following warranty:

1.The warranty registration card must be mailed within ten days after purchase date to validate this war-

ranty.

2. DigiTech warrants this product, when used solely within the U.S., to be free from defects in materials

and workmanship under normal use and service.

3. DigiTech liability under this warranty is limited to repairing or replacing defective materials that show

evidence of defect, provided the product is returned to DigiTech WITH RETURN AUTHORIZATION,

where all parts and labor will be covered up to a period of one year (this warranty is extended to a

period of six years when the product has been properly registered by mail or through our website).

A Return Authorization number may be obtained from DigiTech by telephone.The company shall not

be liable for any consequential damage as a result of the product's use in any circuit or assembly.

4. Proof-of-purchase is considered to be the burden of the consumer.

5. DigiTech reserves the right to make changes in design, or make additions to, or improvements upon

this product without incurring any obligation to install the same on products previously manufactured.

6.The consumer forfeits the benefits of this warranty if the product's main assembly is opened and tam-

pered with by anyone other than a certified DigiTech technician or, if the product is used with AC volt-

ages outside of the range suggested by the manufacturer.

7.The foregoing is in lieu of all other warranties, expressed or implied, and DigiTech neither assumes nor

authorizes any person to assume any obligation or liability in connection with the sale of this product.

In no event shall DigiTech or its dealers be liable for special or consequential damages or from any

delay in the performance of this warranty due to causes beyond their control.

NOTE:The information contained in this manual is subject to change at any time without notification. Some

information contained in this manual may also be inaccurate due to undocumented changes in the product or

operating system since this version of the manual was completed.The information contained in this version

of the owner's manual supersedes all previous versions.

Bass Multi Chorus Manual 8/20/02 10:43 AM Page 3

DigiTech has long been known as a leader in the guitar and bass signal

processing industry. The Bass Multi Chorus brings you a breakthrough in

chorus effect technology. Thanks to our proprietary AudioDNA™

processor, the Bass Multi Chorus is the only pedal that provides up to

16 independent voices of interactive chorusing. The result is a lush wash

of modulation that rivals any of the finest pedal and rack chorus devices

you have ever heard.

1. Level Knob

Controls the output level of the effect. Turn this knob clockwise to

increase the output level, and counter-clockwise to decrease the output

level.

2. Speed Knob

Controls the rate that the chorus modulates. Turn this knob clockwise

to increase the rate, and counter-clockwise to decrease the rate.

3.AC Adapter Jack

Connect a DigiTech PS200R power supply to this jack. Use the proper

supply for your area’s Mains line voltage.

Bass Multi Chorus Manual 8/20/02 10:43 AM Page 4

2 3 4

Bass Multi Chorus Manual 8/20/02 10:43 AM Page 5

4. Depth Knob

Controls the depth of the chorus effect. Turn this knob clockwise to

increase the depth, and counter-clockwise to decrease the depth.

5.Voice Knob

Controls the number of chorus voices used. At the knob’s minimum

position, only a single chorus voice is heard. As the knob is turned

clockwise, more voices are brought in. At the maximum position of the

Voice knob, 16 voices are heard interacting with one another.

6. Input Jack

Connect your instrument to this jack. Connecting a 1/4” cable to this

jack supplies battery power even though the Indicator LED may not be

lit. To prolong battery life, disconnect all cables from the pedal when not

in use.

7. Pedal Release Pins

These two pins are spring-loaded hinges that hold the pedal in place.

Push these pins in to release the pedal from the pedal chassis exposing

the battery compartment. (See battery replacement diagram.)

Bass Multi Chorus Manual 8/20/02 10:43 AM Page 6

8. Pedal

Press the pedal to turn the effect on and off.

9. Out 1(Mono) Jack

Connect this output to a single bass amplifier or mixer channel panned

to the center for mono operation.

10. Indicator LED

This LED indicates when the effect is turned on. If the LED becomes

dim or does not light when the cables are connected, the battery needs

to be replaced.

11. Out 2 Jack

Connect this output to a second amplifier or mixer channel for true

stereo chorusing. Stereo is the best way to get the most effective

chorusing experience from the Bass Multi Chorus pedal.

Bass Multi Chorus Manual 8/20/02 10:43 AM Page 7

Connections

The Bass Multi Chorus has a single input and a pair of outputs. Out 1

is used if the Bass Multi Chorus is being connected to only one amplifier

or mixer channel. Out 2 is used for stereo operation. Connect Out 1

to the first amplifier or mixer channel panned hard left and Out 2 to

the second amplifier or mixer channel panned hard right.

The Bass Multi Chorus also has built-in CIT™ cabinet modeling. This is

a useful tool when running a distortion pedal into the Bass Multi Chorus

and then running direct into a mixer or recorder. This creates a

through-an-amplifier sound without having to use a bass amp. The CIT

model is based off a 4x10 cabinet.

To Enable CIT™ Cabinet Modeling:

Press the pedal down and apply power (connect a 1/4” cable to the Bass

Multi Chorus input or connect the PS200R power supply to the AC

adapter jack).

CIT™ cabinet modeling has to be turned on each time you apply power

to the Bass Multi Chorus.

Bass Multi Chorus Manual 8/20/02 10:43 AM Page 8

Bass Multi Chorus Manual 8/20/02 10:43 AM Page 9

Battery Replacement

1. Using the tip of a 1/4” cable, push one of the release pins in on either

side of the pedal, and remove the pedal from the pedal chassis.

2. Remove the battery from the battery compartment and disconnect

the battery cable.

3. Connect a new battery to the battery cable and put it back in the

battery compartment. Make sure the battery cable does not interfere

with the spring or pedal switch arm.

4. Place one hole of the pedal over its corresponding pin.

5. Push the opposite pin in and lower the other side of the pedal into

place over the depressed pin. Release the pin. When the pedal is

properly fastened, both release pins are flush with the outer side of

the pedal.

Bass Multi Chorus Manual 8/20/02 10:43 AM Page 10

Altri manuali per BASS MULTI CHORUS

Indice

Altri manuali digi-tech Pedale musicale

digi-tech

digi-tech SCREAMINBLUES Manuale utente

digi-tech

digi-tech PDS1550 Manuale utente

digi-tech

digi-tech Element Manuale utente

digi-tech

digi-tech Distortion Factory DF-7 Manuale utente

digi-tech

digi-tech BRIAN MAY RED SPECIAL PEDAL Manuale utente

digi-tech

digi-tech Scott Ian Black-13 Manuale utente

digi-tech

digi-tech RP200A Manuale utente

digi-tech

digi-tech JamMan Express XT Manuale utente

digi-tech

digi-tech Polara Manuale utente

digi-tech

digi-tech JAMMAN STEREO Manuale utente

digi-tech

digi-tech HARDWIRE TL-2 Manuale utente

digi-tech

digi-tech Mosaic Manuale utente

digi-tech

digi-tech JAMMAN - MANUAL 2 Manuale utente

digi-tech

digi-tech Genesis 3 Manuale utente

digi-tech

digi-tech RPX400 Manuale utente

digi-tech

digi-tech GENESIS3 Manuale utente

digi-tech

digi-tech The Jimi Hendrix Experience Manuale utente

digi-tech

digi-tech Bass Squeeze Manuale del proprietario

digi-tech

digi-tech GeNetX GNX2 Manuale utente

digi-tech

digi-tech RP500 Istruzioni per l'installazione e il funzionamento

digi-tech

digi-tech BASS SYNTH WAH Manuale utente

digi-tech

digi-tech 2112 Manuale utente

digi-tech

digi-tech RP100A Manuale utente

digi-tech

digi-tech RP500 Manuale utente

Manuali Pedale musicale popolari di altre marche

Behringer

Behringer ULTRA WAH UW300 Manuale utente

Whirlwind

Whirlwind oc-bass Manuale utente

Strymon

Strymon Lex-rotary Manuale utente

Behringer

Behringer PB600 Manuale utente

Lexicon

Lexicon MX200 Manuale utente

Dunlop

Dunlop Hendrix 68 Shrine Octavio Fuzz Series Manuale utente

Matthews Effects

Matthews Effects Whaler V2 Manuale utente

Grid 1

Grid 1 Pedal Jeanie Manuale utente

Amptweaker

Amptweaker tightboost Manuale utente

Ibanez

Ibanez TS-808 Tube Screamer Overdrive Pro Manuale utente

PuzzleSounds

PuzzleSounds DR. Q ENVELOPE FILTER Manuale utente

BYOC

BYOC Analog Chorus Manuale

Dimavery

Dimavery EPVP-50 Manuale utente

Tefi Vintage Lab

Tefi Vintage Lab GEGÈ Manuale utente

Pro-MIDI

Pro-MIDI G25 Manuale utente

DW 7000 Manuale utente

FAMC

FAMC Liquid-Foot Jr. Series Manuale utente

Dimavery

Dimavery EPOD-50 Overdrive Manuale utente

digi-tech BASS MULTI CHORUS Manuale utente

Manuali Pedale musicale popolari di altre marche