Digi ConnectCore 9P 9215 Guida all'applicazione

ConnectCore™

9P 9215, Wi-9P 9215, and



3G 9P 9215

Hardware Reference

90000879_L

Release date: October 2010

Digi, Digi International, the Digi logo, a Digi International Company, Digi JumpStart Kit, ConnectCore,

NET+, NET+OS and NET+Works are trademarks or registered trademarks of Digi International, Inc. in the

United States and other countries worldwide. All other trademarks are the property of their respective

owners.

Information in this document is subject to change without notice and does not represent a commitment

on the part of Digi International.

Digi provides this document “as is,” without warranty of any kind, either expressed or implied, including,

but not limited to, the implied warranties of fitness or merchantability for a particular purpose. Digi may

make improvements and/or changes in this manual or in the product(s) and/or the program(s) described

in this manual at any time.

This product could include technical inaccuracies or typographical errors. Changes are periodically made

to the information herein; these changes may be incorporated in new editions of the publication.

Using this Guide

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . .

3ConnectCore 9P 9215, Wi-9P 9215, and 3G 9P 9215 Hardware Reference

This guide provides information about the Digi ConnectCore 9P 9215 family of

embedded core modules.

Conventions used

in this guide This table describes the typographic conventions used in this guide:

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Digi information

Documentation

updates Please always check the product specific section on the Digi support website for the

most current revision of this document: www.digiembedded.com/support/

Customer support For more information about your Digi products, or for customer service and

technical support, contact Digi international.

This convention Is used for

italic type Emphasis, new terms, variables, and document titles.

monospaced type Filenames, pathnames, and code examples.

To contact Digi International by Use

Mail Digi International

1101 Bren Road East

Minnetonka, MN 55343

U.S.A.

World Wide Web http://www.digiembedded.com/support/

email http://www.digiembedded.com/support/

Telephone (U.S.) (952) 912-3444 or (877) 912-3444

Telephone (other locations) +1 (952) 912-3444 or (877) 912-3444

www.digiembedded.com 4

Contents

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . .

Customer support .............................................................................. 3

Chapter 1: About the Module .............................11

Features and functionality ............................................................12

Module variant ................................................................................13

Module pinout ..........................................................................14

Pinout legend: Type ..........................................................................14

X1 pinout .......................................................................................14

X2 pinout .......................................................................................18

Configuration pins — CPU .............................................................26

Default module CPU configuration .........................................................26

Configuration pins — Module .........................................................27

Identification of the module ................................................................27

Module pin configuration ....................................................................27

Clock generation .......................................................................29

Clock frequencies .............................................................................29

Changing the CPU speed .....................................................................29

Boot process ............................................................................30

Chip selects .............................................................................31

Chip select memory map ....................................................................31

SDRAM banks ............................................................................32

NAND Flash Memory ....................................................................32

5ConnectCore 9P 9215, Wi-9P 9215, and 3G 9P 9215 Hardware Reference

Multiplexed GPIO pins .................................................................32

GPIO multiplex table .........................................................................33

Module LEDs .............................................................................38

ConnectCore 9P 9215 LEDs ..................................................................38

ConnectCore 

Wi-9P 9215 LEDs ...............................................................................38

ConnectCore 3G 9P 9215 LEDs ..............................................................38

External interrupts ............................................................................38

Interfaces ................................................................................39

10/100 Mbps Ethernet port ..................................................................39

UART ............................................................................................39

SPI ...............................................................................................40

I2C bus ..........................................................................................40

RTC ..............................................................................................40

WLAN ............................................................................................40

WWAN ...........................................................................................40

ADC ..............................................................................................40

FIM ...............................................................................................40

External Address/Data Bus ..................................................................41

Antenna .........................................................................................41

Power ....................................................................................44

Power supply ...................................................................................44

Internal voltage ...............................................................................44

Chapter 2: About the Development Board ............... 45

What’s on the Development Board? ........................................................45

User interface ..........................................................................48

. . . . .

www.digiembedded.com 6

Switches and Pushbuttons ............................................................ 49

Reset control, S3 ............................................................................. 49

Power switch, S2 ............................................................................. 49

User pushbuttons, S6 and S7 ................................................................ 50

Legend for multi-pin switches .............................................................. 50

Module configuration switches, S4 ........................................................ 50

Wake-up button, S8 .......................................................................... 50

Serial Port B MEI configuration switches, S1 ............................................. 51

Jumpers ................................................................................. 52

Jumper functions ............................................................................. 53

Battery and Battery Holder .......................................................... 53

LEDs ...................................................................................... 54

WLAN LED LE7 ................................................................................. 54

Power LEDs, LE3 and LE4 .................................................................... 54

User LEDs, LE5 and LE6 ...................................................................... 55

Serial status LEDs ............................................................................. 55

Status LEDs Serial Port D LEDs .............................................................. 55

Status LEDs Serial Port B LEDs .............................................................. 55

Serial UART Ports ...................................................................... 56

Serial port D, RS232 .......................................................................... 57

Serial port A TTL interface ................................................................. 57

Serialport A, XBee socket ................................................................... 58

Serial port C TTL interface ................................................................. 59

Serial port B, MEI interface ................................................................. 60

I2C Interface ........................................................................... 61

I2C header ..................................................................................... 61

7ConnectCore 9P 9215, Wi-9P 9215, and 3G 9P 9215 Hardware Reference

I2C digital I/O expansion .....................................................................62

SPI interface ............................................................................63

Pin allocation ..................................................................................64

Current Measurement Option ........................................................65

How the CMO works ..........................................................................65

JTAG Interface ..........................................................................66

Standard JTAG ARM connector, X13 ........................................................67

PoE module connectors - IEEE802.3af ..............................................68

The 802.3af PoE Application Kit ............................................................69

X9 ................................................................................................69

X26 ..............................................................................................69

POE_GND .......................................................................................70

Power Jack, X24 ...............................................................................70

Ethernet Interface .....................................................................71

RJ-45 pin allocation, X19 ....................................................................72

LEDs .............................................................................................72

WLAN Interface .........................................................................73

WWAN Interface ........................................................................74

Peripheral (Expansion) Headers ......................................................76

Peripheral application header, X33 ........................................................77

Module and Test Connectors .........................................................78

Module connectors ............................................................................78

Test connectors ...............................................................................78

X10 pinout ......................................................................................79

X11 pinout ......................................................................................79

X20 pinout ......................................................................................80

. . . . .

www.digiembedded.com 8

X21 pinout ..................................................................................... 81

Appendix A:Specifications .................................................................82

Mechanical Information ............................................................... 82

Network Interface ..................................................................... 83

Ethernet ....................................................................................... 83

WLAN Interface ............................................................................... 83

WWAN Interface .............................................................................. 85

Environmental Information .......................................................... 87

Thermal Specifications ............................................................... 88

Additional design recommendations ...................................................... 90

Safety Statements ..................................................................... 91

Power Requirements .................................................................. 92

IEEE802.11 a/b/g WLAN .............................................................. 93

WWAN Activity ......................................................................... 93

ConnectCore 9P 9215 and ConnectCore Wi-9P 9215 Typical Power Save Current /Power Measurements 94

ConnectCore 3G 9P 9215 Typical Power Save Current /Power Measurements 95

Typical Module Current / Power Measurements .................................. 96

ConnectCore 9P 9215 Module Mechanical Details ................................ 97

Top view ....................................................................................... 97

Side view ...................................................................................... 97

Extended Footprint Option ................................................................. 98

ConnectCore Wi-9P 9215 Module Mechanical Details ............................ 99

Top view ....................................................................................... 99

Side view ...................................................................................... 99

Layout Recommendation ............................................................100

Extended Footprint Option ................................................................101

9ConnectCore 9P 9215, Wi-9P 9215, and 3G 9P 9215 Hardware Reference

Reset and Edge Sensitive Input Timing Requirements .......................... 106

ConnectCore Wi-9P 9215 Antenna Specifications: 2 dBi Dipole ............... 107

Attributes .................................................................................... 107

Dimensions ................................................................................... 107

Antenna strength (radiation pattern) diagram ......................................... 108

ConnectCore Wi-9P 9215 Antenna Specifications: 5.5 dBi Dipoles ........... 109

Attributes .................................................................................... 109

Dimensions ................................................................................... 109

Radiation pattern: H-Plane (2.0 and 5.0 GHz) .......................................... 110

Radiation pattern: E-plane (2.0 and 5.0 GHz) .......................................... 111

ConnectCore 3G 9P 9215 TG-09 Penta-band GSM Hinged R/A SMA antenna 112

Attributes .................................................................................... 112

E-Plane Radiation Pattern Straight ....................................................... 113

H-Plane Radiation Pattern Straight ...................................................... 113

E-Plane Radiation Pattern 90° Bend ..................................................... 114

H-Plane Radiation Pattern 90° Bend ..................................................... 114

ConnectCore 3G 9P 9215 GPS Antenna GPS-X-02021 ........................... 115

Mechanical Data ............................................................................. 115

Electrical Specification .................................................................... 115

Environmental Specification .............................................................. 116

Appendix B:Certifications ................................................................117

FCC Part 15 Class B .................................................................. 117

Appendix C: ConnectCore 3G 9P 9215 Strapping ....................................122

Strapping Options .................................................................... 122

Appendix D: ConnectCore 3G 9P 9215 GPIO ..........................................124

GPIO .................................................................................... 125

. . . . .

www.digiembedded.com 10

Appendix E: Change Log ................................................................. 127

Revison B ...............................................................................127

Revision C ..............................................................................127

Revision D ..............................................................................127

Revision E ..............................................................................128

Revision F ..............................................................................128

Revision G .............................................................................128

Revision H ..............................................................................128

Revision I ...............................................................................128

Revision J ..............................................................................128

Revision K ..............................................................................128

Revsion L ...............................................................................128

Altri manuali per ConnectCore 9P 9215

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Digi Modulo wireless

Digi

Digi XBee ZigBee S2C Manuale utente

Manuali Modulo wireless popolari di altre marche

Laird

Laird RM024 Manuale utente

Laird

Laird BT830-SA Guida rapida alla configurazione

Ebyte

Ebyte E49-400T20S Manuale utente

Fibocom

Fibocom FM101-NA-20 Istruzioni per l'installazione

Waldmann

Waldmann EnOcean TALK MODUL G2 Manuale utente

Smartech

Smartech LBT-1.DO4 Manuale utente

Cooper Wiring Devices

Cooper Wiring Devices ESPIRE RF RFAPM Manuale utente

Yuga

Yuga CLM920 Manuale utente

Waldmann

Waldmann TALK Bluetooth Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions UC864-G Manuale di installazione

Ebyte

Ebyte E07-900M10S Manuale utente

Quectel

Quectel SC690A Series Supplemento

Panasonic

Panasonic INDUSTRY PAN9028 Guida rapida alla configurazione

Ebyte

Ebyte E70-433NW30S Manuale utente

LongSung Technology

LongSung Technology U9507E Manuale utente

Wistron NeWeb

Wistron NeWeb DNUR-S2 Manuale utente

Ebyte

Ebyte E49-400M20S4 Manuale utente

RF-Star

RF-Star SimpleLink RF-BM-2652P1 CC2652P Manuale utente