Digiray FireCR Guida utente
DIGIRAY CORP.
Basic Guide of FireCR Scanner
Training Contents
•Install FireCR+.
•Explain the function of each part.
•Disassembly and assembly of FireCR+.
•Explain how to calibrate
•Explain Quantor software.
•Common Issues.
FireCR+ installation
1. Take out a FireCR+ scanner and accessories in the box.
•Components
2. Check all components that are in the box.
3. Take out FireCR+ scanner.
4. The FireCR+ scanner must be placed on the flat desk with at least 50 cm free space on the front side.
Free space of 20 cm back side.
Item Quantity
FireCR Plus Scanner 1
Power Cord 1
Power Adaptor 1
Dust Cover 1
USB 2.0 Interface Cable 1
Cassette 14 x 17” containing IP size 14 x 17” 1
Cassette 10 x 12” containing IP size 10 x 12” 1
Extractor 1
Dongle (Option) 1
Speed Plate (Option) 1
4. Connect power and USB cable on the back of FireCR+ scanner.
•Connection
Note: You must connect USB cable to USB port 2.0 of PC.
5. Connect a dongle to PC. (Q dongle is needed.)
6. Download and install Quantor software. Please refer to the below website
Rebuilding now.Announcement due later.
•for User manual download
•for Quantor software download
7. Quantor software installation
•Log on a PC with an administrator account.
•Connect the USB dongle to a USB port
- You should connect USB cable to USB 2.0 port.
•Launch software file, “QuantorMed 2.x.x Setup.exe”
•Click the “Next” button as shown in Figure 2.1
•Choose all components and click the “Next” button as shown in Figure 2.2
•Choose your language and click “Next” button as shown in Figure 2.3
•Choose FireCR model and click the “Next” button as shown in Figure 2.4
•Choose the destination folder and click the “Install” button as shown in Figure 2.6
•Installation status will be displayed.
•Installation status of the FireCR USB driver will be displayed as shown in Figure 2.7.
•Installation is successful, Figure 2.8 will show up.
•Click “Finish to finish the installation.
•the Windows Security Dialog Box pops up after installation, click [Allow access].
Indice
