Digiscan Labs SUMMIT Manuale utente
PHONE SAFE SUMMIT
INTERFERENCE
Type of interference
Power of noise
DIMENSIONS AND WEIGHT
Dimensions (width x height x depth)
Compatible phones
Weight
POWER
Source
Current consumption
Battery
CONNECTOR
Battery resource
Recharging time
OTHER
Sensors
Indicators
Ultra sound, inaudible frequency
<2 W in the active area
262 x 78 x 82 mm
Height up to 180 mm
600 g
1) USB 5V
2) Built-in rechargeable battery
500 mA (noise mode)
6 mA (stand-by mode)
Li-Ion, 3.7 V, 6800 mAh
USB Type C
> 10 hours
12 hours
IN USE , ACTIVE
BATT, ACTIVE, IN USE
Unfortunately, the creation of radio interference (RF jamming of mobile communications, Wi-Fi and Bluetooth) does not guarantee protection, as there is still the possibility
of accumulating information in the phone's memory (voice recorder mode). Given this factor, the only reliable way to protect is to block the phone's acoustic channel.
This prevents acoustic information from leaking, regardless of how it is listened to or transmitted. A number of modern technologies have been used in the PHONE SAFE
SUMMIT device for your protection.
FEATURES AND ADVANTAGES
Blocks the microphone of the phone with the help of non-filterable inaudible
ultrasonic interference
Efficiently prevents surround recording app from capturing conversations and
sounds
Suppresses both the bottom and upper microphones of the phone by creating
two-side interference
Up to 4 phones can fit inside
Inaudible frequency of interference has been optimally selected for the best
performance and affects all existing models of smartphones
Made with the design of an attractive natural wood stand
The acoustically isolated phone can remain close to the owner where the screen
can be easily observed
The phone stays online and available for incoming calls
No illegal radio jamming
Can be powered by the external USB, or from the built-in rechargeable battery
Has 2 sensors, increasing the battery's resource: the device starts producing
interference when a phone is inserted (IN USE sensor) and a conversation is
present (ACTIVE sensor)
Is compatible with all types of phones (max. height 180 mm)
SPECIFICATION
Capacity Up to 4 phones
PROTECTION AGAINST A MOBILE PHONE’S SURROUNDINGS
LISTENING AND RECORDING
Obviously mobile phones have an infinite number of benefits for
communication and business; however, they also create certain
threats of information leakage. One of the potential leakage
channels is the phone's microphone being able to pick up
surrounding acoustics with a high sensitivity.
The PHONE SAFE SUMMIT has been
developed by information security
professionals to protect against
this exact type of threat.
While developing this product the following
features and vulnerabilities ofmodern phones
were taken into account:
The phone can be intentionally, or covertly,
'off-hook' during important negotiations
Voice recording software can intentionally,
or secretly, run on the smartphone
Listening software can run in a 'stealth' mode
Spyware can be installed on the smartphone without
the owner's knowledge, allowing attackers to activate
covert eavesdropping around the phone. There are known cases of transmission of such software by exploiting the vulnerabilities of some messengers
The acoustic environment around the phone can be transmitted to the server, or cloud service of the attackers either in real time or with a postponed uploading
Smartphone apps which have access to the phone's microphone can be used for eavesdropping in cases of them having been hacked (usually messengers or social
network apps)
Uploading of information can be done
in the following ways: MOBILE
INTERNET Wi-Fi BLUETOOTH THE PHONE’S
CONNECTOR
CONVENTIONAL
VOICE CALL
USAGE
Place the PHONE SAFE SUMMIT on the table/
desk in front of the user and insert the phone
which is to be protected inside
Press the “POWER”
button
TESTING
To make sure that the interference is effective, turn on the voice recorder on your phone and insert it
in the PHONE SAFE SUMMIT. Create test sounds, then playback the recording.
BATTERY AND RECHARDING
For stationary use, or in order to recharge the battery, connect the USB charging cable to the socket on the left side of the device and the other end to a
USB socket of a phone charger or computer. The USB slot of the device will glow red while charging, and will turn off when the battery is fully charged.
The "BATT" LED will change its color depending
on the battery's level of charge: GREEN - the battery is full
ORANGE - the battery is half discharged
RED - the battery is low and needs recharging
Note: When the BATTERY indicator is red, the device will stop producing interference. To continue securing your phone, connect the device
to a charging source (USB).
RECOMMENDATIONS FOR USE
The PHONE SAFE SUMMIT can be used alone or as part of a wider speech protection system
Equip the meeting room, or office, with the required number of devices, taking into account the maximum number of visitors
For continuous use, ensure that the required number of USB ports are available near the devices
SUPPLIED SET
PHONE SAFE SUMMIT device
USB Type C cable
User manual
1
2
The phone should be positioned with
its side down (put on its side).
Up to 4 phones can fit inside the device
“ACTIVE” (blue LED) – confirms
activity of the noise generator
and the presence of sound
“IN USE” (orange LED) -
indicates that a phone
is installed in the device
Altri manuali Digiscan Labs Accessori per telefoni cellulari
