Digital Cube Digital Puppet Manuale utente
Digital Puppet
Instruction Manual
Rev 1.01
Digital Cube Co., Ltd.
Digital Puppet
1 First of all
2 Precautionsfor use
3 Prepare E/M
4 Prepare paper craft
5Let’s try
6 Record & playback
7 Operate Multi-puppets
8 FAQ
9 Specifications
table of contents
1 First of all
1-1 Contents of the set
1-2 Definition of terms
2 Precautions for use
3 Prepare Electric and mecha
3-1 Part names of Controller
3-2 Part names of Battery Box & Pedestal
3-3 Connect to single pedestal
3-4 Connect to two pedestals
3-5 Insert batteries
3-6 Fix the pedestal
4 Prepare paper craft
4-1 Download
4-2 Printout
4-3 Make
4-4 Attach
5 Let’s try
5-1 Turn the power on
5-2 Move the base motor
5-3 Move the top motor
5-4 Show to the other party
・・・・・３
・・・・・４
・・・・・５
・・・・・６
・・・・・７
・・・・・８
・・・・・９
・・・・・１０
・・・・・１１
・・・・・１２
・・・・・１３
・・・・・１４
・・・・・１５
・・・・・１６
・・・・・１７
・・・・・１８
・・・・・１９
・・・・・２０
・・・・・２１
・・・・・２２
・・・・・２３
1 First of all
2 Precautions for use
3 Prepare E/M
4 Prepare paper craft
5Let’s try
6 Record & playback
7 Operate Multi-puppets
8 FAQ
9 Specifications
Digital Puppet
1 First of all
2 Precautions for use
3 Prepare E/M
4 Prepare paper craft
5Let’s try
6 Record & playback
7 Operate Multi-puppets
8 FAQ
9 Specifications
table of contents
6 Record & playback
6-1 Record movement
6-2 Playback recorded movement
6-3 Move randomly
6-4 Input mode transition
6-5 Control by motion sensor
7 Operate multiple puppets
7-1 Add more controllers
7-2 Operate together
7-3 Reverse the movement of adjacent puppet
7-4 Delay the movement of adjacent puppet
7-5 Output mode transition
8 FAQ
9 Specifications
・・・・・２４
・・・・・２５
・・・・・２６
・・・・・２７
・・・・・２８
・・・・・２９
・・・・・３０
・・・・・３１
・・・・・３２
・・・３３
・・・・３４
・・・・・３５
・・・・・３６
・・・・・３９
Digital Puppet
ch.
1 First of all
2 Precautions for use
3 Prepare E/M
4 Prepare paper craft
5Let’s try
6 Record & playback
7 Operate Multi-puppets
8 FAQ
9 Specifications
1 First of all
3
Thank you for purchasing a digital puppet. Please read this
instruction manual carefully and use it correctly. Be sure to
read “Precautions for Use” before use. A digital puppet is a kit
that consists of pedestals (two-axis movable) and a controller
for mounting paper craft. Download your favorite paper craft
from our HP and create it. Cute puppets created with paper
craft will begin to dance digitally. If you connect multiple
controllers, you can manipulate many puppets with one
fingertip. Please enjoy the movement unique to digital control.
Digital Cube Co., Ltd.
Digital Puppet
ch.
1 First of all
2 Precautions for use
3 Prepare E/M
4 Prepare paper craft
5Let’s try
6 Record & playback
7 Operate Multi-puppets
8 FAQ
9 Specifications
1-1 Contents of the set
4
Set includes ①controller, ②battery box, ③pedestal, and ④basic
manual. Paper craft is not included.
②Battery Box ③Pedestal
④basic manual
※2 pedestals in 2puppet set
①Controller
Digital Puppet
ch.
1 First of all
2 Precautions for use
3 Prepare E/M
4 Prepare paper craft
5Let’s try
6 Record & playback
7 Operate Multi-puppets
8 FAQ
9 Specifications
1-2 Definition of terms
5
Servo motor: A motor controlled to stop at a specified rotation
angle.
Paper craft: A three-dimensional model created with paper.
Puppet: “Puppet” in the broad sense. Here, it refers to a paper craft
attached to a pedestal that moves in two axes.
Joystick: One of the positioning sensors. Outputs position
information in two directions with your fingertips, and is the basis
for puppet movement information.
Flash memory: A type of memory that retains values even when
the power is turned off. Used to record puppet movement
information.
Pin header: A general term for components with multiple pins that
can be mounted on a board. Connect the pin connector.
(Pin) Connector: A rectangular parallelepiped female socket for
connection to the pin header.
Digital Puppet
ch.
1 First of all
2 Precautions for use
3 Prepare E/M
4 Prepare paper craft
5Let’s try
6 Record & playback
7 Operate Multi-puppets
8 FAQ
9 Specifications
2 Precautions for use
6
Do not perform the following operations as they may cause
malfunctions.
Insert the battery in the reverse direction (in the battery box)
Mounting the power supply and pedestal connector in the reverse
direction
Pull the connector by holding the cable instead of the plastic
housing.
Move the pedestal directly by hand (motor movement direction)
Use in a wet or humid environment
Touch the back of the controller while the power is on
Touch the pin header or backside parts on the controller with
tweezers or scissors while the power is on.
Modification of the controller and the pedestal
Applying a strong impact to the controller or the pedestal such as
dropping
In addition, if you move the motor with your finger between the
pedestal gaps, you may be injured. Please be careful. Please use small
children with parents.
Digital Puppet
ch.
1 First of all
2 Precautions for use
3 Prepare E/M
4 Prepare paper craft
5Let’s try
6 Record & playback
7 Operate Multi-puppets
8 FAQ
9 Specifications
３Prepare Electric and Mecha
7
Digital Puppet
ch.
1 First of all
2 Precautions for use
3 Prepare E/M
4 Prepare paper craft
5Let’s try
6 Record & playback
7 Operate Multi-puppets
8 FAQ
9 Specifications
3-1 Part names of controller
8
Pin header for
pedestal-1
chain
connector
Pin header for
power
supply/sensor/
external input
LED Bar for
status display
Joystick
Function
button Pin header for
pedestal-2
Digital Puppet
ch.
1 First of all
2 Precautions for use
3 Prepare E/M
4 Prepare paper craft
5Let’s try
6 Record & playback
7 Operate Multi-puppets
8 FAQ
9 Specifications
3-2 Part names of Pedestal &
Battery Box
9
Battery Box Power connector
Power
switch Pedestal
Base motor connector
(B connector)
※”〇” is upper side
※”B” is upper side
※”T” is upper side
Top
motor
Base
motor
Top motor connector
(T connector)
Indice
