Digital Equipment DECstation 5000 Model 200 Manuale utente

EK-366AA-OG-002

DECstation 5000

Model 200

HardwareOperator’sGuide

digital equipment corporation

maynard, massachusetts

First printing, April 1990

Second printing, October 1990

The information in this document is subject to change without notice and should

not be construed as a commitment by Digital Equipment Corporation. Digital

Equipment Corporation assumes no responsibility for any errors that may appear

in this document.

The software described in this document is furnished under a license and may be

used or copied only in accordance with the terms of such license.

Digital Equipment Corporation assumes no responsibility for the use or reliability

of its software on equipment that is not supplied by Digital or its afﬁliated

companies.

Printed in U.S.A.

U.S.A.

This equipment generates, uses, and may emit radio frequency energy. The

equipment has been type tested and found to comply with the limits for a Class

A computing device pursuant to Subpart J of Part 15 of FCC Rules, which

are designed to provide reasonable protection against such radio frequency

interference. Operation of this equipment in a residential area may cause

interference in which case the user at his own expense will be required to take

whatever measures may be required to correct the interference.

The following are trademarks of Digital Equipment Corporation:

DEC PDP VAXBI

DECnet ThinWire VAXcluster

DECstation TURBOchannel VAXstation

DECsystem ULTRIX VMS

DECUS ULTRIX-32 VT

MicroVAX UNIBUS

MicroVMS VAX

Contents

Using This Guide ........................................... xiii

Part I Basic Workstation Hardware

1 Getting Started

Workstation Site Requirements ........................ 1–2

Temperature. . .................................... 1–2

Humidity ........................................ 1–2

Cleanliness . . . .................................... 1–2

Interference . . .................................... 1–3

Power ........................................... 1–3

Supplies ......................................... 1–3

Workstation Voltage Requirements. . .................... 1–4

The Parts of a Basic DECstation 5000 Model 200

Workstation ......................................... 1–4

2 System Unit, Monitor, Keyboard, and Mouse or Tablet

The System Unit . .................................... 2–2

Connectors, Controls, and Indicator Lights on the

System Unit . . .................................... 2–2

Inside the System Unit ............................ 2–4

The Monitor ......................................... 2–7

Connectors, Controls, and Indicator Lights on the

Monitors ......................................... 2–7

Connecting the Monitor to the System Unit ........... 2–13

iii

The Keyboard . . . .................................... 2–19

Adjusting the Keyboard ............................ 2–20

The Mouse and Tablet ................................ 2–22

Cleaning the Mouse .................................. 2–23

Connecting the Keyboard and Mouse or Tablet to the

System Unit ......................................... 2–24

Connect the Cable Assembly to the System Unit....... 2–25

Position the Connector Block Next to the Monitor. . . . . . 2–26

Connect the Keyboard to the Connector Block ......... 2–27

Connect the Mouse or Tablet to the Connector Block . . . 2–28

Supplying Power to the System Unit and Monitor ........ 2–29

Connect the Monitor-to-System-Unit Power Cable or the

Monitor Power Cord . . . ............................ 2–30

Connect the System Unit Power Cord ................ 2–32

3 Ethernet Hardware for the Basic Workstation

Terminating ThinWire Ethernet ........................ 3–2

Connecting ThickWire Ethernet Loopback Connectors . . . . . 3–4

Part II Optional Hardware

4 Internal Hardware Options

Removing and Replacing the System Unit Cover.......... 4–2

Installing and Removing Memory Modules ............... 4–5

Adding and Removing Option Modules .................. 4–12

Installing and Removing Option Modules ................ 4–15

Testing a new option module.................. 4–21

5 External Storage Options: Hard Disk, Floppy Disk,

Tape, and Optical Compact Disc Drives

Installing External Storage Devices . .................... 5–4

Set Up Your Expansion Boxes. . . .................... 5–4

Set the SCSI Switches for Each Device ............... 5–6

Connect Expansion Boxes to the System Unit ......... 5–9

Turn On Expansion Boxes and Check Conﬁguration

Displays ......................................... 5–15

Installing a Device in a BA42 Storage Expansion Box . . . . . 5–17

Using External Storage Devices ........................ 5–17

6 Optional Network Connections: ThinWire and

ThickWire Ethernet

Finding Your Ethernet Station Address.................. 6–3

Connecting the Workstation to an Ethernet Network . . . . . . 6–4

Connecting to a ThinWire Network .................. 6–4

For a workstation at the end of a ThinWire cable

segment ................................... 6–5

For a workstation within a ThinWire cable

segment ................................... 6–7

Connecting to ThickWire Networks . .................... 6–9

7 External Communication Options: Printers, Plotters,

Modems, and Console Terminals

Installing a Device That Has a 25-Pin Connector ......... 7–3

Installing a Device That Has a Telephone-Jack Type of

Connector ........................................... 7–6

Part III Testing Hardware

8 Starting and Testing Workstation Hardware

Turning On Your Workstation .......................... 8–2

Testing Your Workstation. . ............................ 8–9

Run the System Self-Test........................... 8–9

Checking Your Conﬁguration Displays................... 8–10

Turning Off Your Workstation .......................... 8–13

9 Troubleshooting

Using Self-Tests. . .................................... 9–2

The Power-Up Self-Test ............................ 9–3

The System Self-Test . . ............................ 9–3

Reading Self-Test Results .......................... 9–4

Interpreting Error Messages Displayed on the

Screen . .................................... 9–4

Interpreting Diagnostic Indicator Lights on the

System Unit ................................ 9–15

Solving Basic Hardware Problems . . .................... 9–17

Contacting Your Digital Service Representative ........... 9–25

10 Using the Console Program

Console and Operating Modes.......................... 10–2

Using Console Mode . . . ............................ 10–2

Console prompts ............................ 10–2

Using Operating Mode . ............................ 10–3

Operating system prompts.................... 10–3

Entering Console and Operating Modes . . . ........... 10–3

Console mode . . . ............................ 10–3

Operating mode . ............................ 10–3

Rules for Typing Console Commands .................... 10–4

Conventions Used in This Chapter. . .................... 10–5

Console Command Formats and Functions ............... 10–6

Console Command Description ......................... 10–8

? Command . . .................................... 10–8

boot Command.................................... 10–8

cat Command. .................................... 10–9

cnfg Command.................................... 10–10

d Command . . .................................... 10–11

e Command . . .................................... 10–12

erl Command . .................................... 10–13

go Command . .................................... 10–13

init Command .................................... 10–13

ls Command . . .................................... 10–14

passwd Command ................................. 10–14

printenv Command ................................ 10–15

restart Command ................................. 10–15

script Command .................................. 10–15

setenv Command.................................. 10–15

sh Command . .................................... 10–16

t Command . . .................................... 10–17

unsetenv Command . . . ............................ 10–17

Environment Variables ................................ 10–18

Console Autoconﬁguration . ............................ 10–20

11 Moving the DECstation 5000 Model 200 Workstation

Dismantling Your Workstation ......................... 11–2

Packing Your Equipment . . ............................ 11–3

Reinstalling Your DECstation 5000 Model 200. ........... 11–3

Part IV Appendixes

A Equipment Speciﬁcations

B Part Numbers

C Connector Pin Assignments

Index

Figures

1-1 Voltage labels......................................... 1–4

1-2 The parts of the basic DECstation 5000 Model 200

workstation .......................................... 1–5

2-1 The back of the system unit ............................ 2–2

2-2 Icons on the system unit . . . ............................ 2–4

2-3 Removing the cover from the system unit ................. 2–5

2-4 The inside of the system unit ........................... 2–6

2-5 Icons on the monitors .................................. 2–7

2-6 The 19-inch VR262 gray-scale monitor ................... 2–8

2-7 The 16-inch VR297 color monitor ........................ 2–9

2-8 The 19-inch VR299 color monitor ........................ 2–10

2-9 The 19-inch VRT19 color monitor ........................ 2–11

2-10 Video cable assemblies ................................. 2–13

2-11 On/off switches on the monitors ......................... 2–14

2-12 Connecting a video cable to the system unit............... 2–15

2-13 Connecting a video cable assembly to a color monitor....... 2–17

2-14 Connecting a video cable assembly to a VR262 19-inch

gray-scale monitor. .................................... 2–18

2-15 The keyboard ......................................... 2–19

2-16 Routing the keyboard cable . ............................ 2–20

2-17 Adjusting keyboard tilt ................................ 2–21

2-18 A mouse and a tablet with its puck and stylus . ........... 2–22

2-19 Removing the tracking ball from the mouse ............... 2–23

2-20 Connecting the keyboard-mouse cable .................... 2–25

vii

2-21 Positioning the connector block.......................... 2–26

2-22 Connecting the keyboard to the connector block ........... 2–27

2-23 Connecting the mouse or tablet to the connector block...... 2–28

2-24 A monitor-to-system-unit power cable and a monitor or

system unit power cord ................................ 2–29

2-25 Connecting the monitor-to-system-unit power cable to the

system unit .......................................... 2–30

2-26 Connecting a power cord to a monitor .................... 2–31

2-27 Connecting the power cord to the system unit . . ........... 2–32

3-1 Attaching terminators to a T-connector ................... 3–2

3-2 Terminating ThinWire Ethernet ......................... 3–3

3-3 Attaching a ThickWire loopback connector ................ 3–5

4-1 Removing the cover from the system unit ................. 4–3

4-2 Using an antistatic wrist strap .......................... 4–4

4-3 A memory module . .................................... 4–5

4-4 Memory inside the system unit.......................... 4–6

4-5 Releasing the memory module bracket ................... 4–7

4-6 Installing a memory module ............................ 4–8

4-7 Releasing the memory module bracket ................... 4–10

4-8 Removing a memory module ............................ 4–11

4-9 An option module . .................................... 4–13

4-10 Option slots inside the system unit . . .................... 4–14

4-11 Installing an option module in option slot 2 ............... 4–18

4-12 Installing a low 3D graphics accelerator option module . . . . . 4–19

4-13 Installing a high 3D graphics accelerator option module . . . . 4–20

5-1 Some expansion boxes ................................. 5–2

5-2 A SCSI connector and option slots . . . .................... 5–3

5-3 Expansion box cables and an expansion box, power cord and

terminator ........................................... 5–5

5-4 Removing the SCSI-switch cover from the BA42 storage

expansion box ........................................ 5–6

5-5 Expansion box SCSI switches ........................... 5–8

5-6 Attaching a system-unit-to-expansion-box cable to a SCSI

connector on the system unit ........................... 5–9

5-7 Attaching a system-unit-to-expansion-box cable to a SCSI

connector on an expansion box .......................... 5–11

5-8 Connecting expansion boxes to other expansion boxes . . . . . . 5–12

5-9 Terminating the ﬁnal expansion box . .................... 5–13

5-10 Connecting power cords ................................ 5–14

6-1 ThinWire and ThickWire connectors on the system unit . . . . 6–2

viii

6-2 Sample Ethernet station addresses . . .................... 6–3

6-3 Removing a terminator from the T-connector . . . ........... 6–5

6-4 Connecting a ThinWire cable to the T-connector ........... 6–6

6-5 Removing the terminators from the T-connector ........... 6–7

6-6 Connecting ThinWire cables to a T-connector . . . ........... 6–8

6-7 A ThickWire Ethernet cable ............................ 6–9

6-8 Removing a loopback connector from a ThickWire

connector ............................................ 6–10

6-9 Connecting a ThickWire Ethernet cable to the system unit . . 6–11

7-1 Communication device connectors and an adapter.......... 7–2

7-2 Connecting a communication device directly to the system

unit ................................................. 7–4

7-3 A communications connector adapter. .................... 7–6

7-4 Using an adapter to connect a communication device to the

system unit .......................................... 7–7

8-1 Expansion box on/off switches ........................... 8–2

8-2 Brightness and contrast icons ........................... 8–3

8-3 Turning on the system unit . ............................ 8–6

8-4 Sample workstation conﬁguration display................. 8–10

8-5 Sample slot conﬁguration display ........................ 8–12

9-1 The reset button on the system unit . .................... 9–2

9-2 Diagnostic indicator lights . . ............................ 9–15

Tables

1Conventions Used in This Guide ........................ xiv

2-1 Connectors, Controls, and Indicator Lights on the System

Unit................................................. 2–3

2-2 Controls, Connectors, and Indicator Lights on the

Monitors ............................................. 2–12

5-1 SCSI Cable Lengths ................................... 5–5

5-2 SCSI ID Switch Settings . . . ............................ 5–7

9-1 Error Messages on the Monitor ......................... 9–5

9-2 Test Error Codes for Color Frame Buffer Modules.......... 9–10

9-3 Test Error Codes for the 2D Graphics Accelerator Module . . . 9–10

9-4 Test Error Codes for 3D Graphics Accelerator Modules . . . . . 9–11

9-5 Test Error Codes for SCSI Modules . . .................... 9–11

9-6 Test Error Codes for Ethernet Controller Modules ......... 9–12

9-7 Test Error Codes for Base System Modules ............... 9–12

9-8 Interpreting Diagnostic Indicator Lights on the System

Unit................................................. 9–16

9-9 Solutions to Basic Hardware Problems ................... 9–17

10-1 Console Command Functions ........................... 10–7

10-2 Console Commands for Environment Variables . ........... 10–18

10-3 Environment Variables Set by the User .................. 10–19

A-1 System Unit Description . . . ............................ A–2

A-2 System Unit Speciﬁcations . ............................ A–2

A-3 System Unit Operating Conditions. . . .................... A–2

A-4 System Unit Nonoperating Conditions.................... A–2

A-5 VR262 Monitor Description . ............................ A–3

A-6 VR262 Monitor Speciﬁcations ........................... A–3

A-7 VR262 Monitor Operating Conditions .................... A–4

A-8 VR262 Monitor Nonoperating Conditions ................. A–4

A-9 VR297 Monitor Description . ............................ A–5

A-10 VR297 Monitor Speciﬁcations ........................... A–5

A-11 VR297 Monitor Operating Conditions .................... A–6

A-12 VR297 Monitor Nonoperating Conditions ................. A–6

A-13 VR299 Monitor Description . ............................ A–7

A-14 VR299 Monitor Speciﬁcations ........................... A–7

A-15 VR299 Monitor Operating Conditions .................... A–8

A-16 VR299 Monitor Nonoperating Conditions ................. A–9

A-17 VRT19 Monitor Description . ............................ A–10

A-18 VRT19 Monitor Speciﬁcations ........................... A–10

A-19 VRT19 Monitor Operating Conditions .................... A–11

A-20 VRT19 Monitor Nonoperating Conditions ................. A–11

A-21 LK201 Keyboard Description............................ A–12

A-22 LK201 Keyboard Speciﬁcations .......................... A–12

A-23 LK201 Keyboard Operating Conditions ................... A–12

A-24 LK201 Keyboard Nonoperating Conditions ................ A–13

A-25 VSXXX-AA Mouse Description .......................... A–14

A-26 VSXXX-AA Mouse Speciﬁcations ........................ A–14

A-27 VSXXX-AA Mouse Operating Conditions.................. A–14

A-28 VSXXX-AA Mouse Nonoperating Conditions............... A–15

A-29 VSXXX-AB Tablet Description .......................... A–16

A-30 VSXXX-AB Tablet Speciﬁcations......................... A–16

A-31 VSXXX-AB Tablet Operating Conditions .................. A–17

A-32 VSXXX-AB Tablet Nonoperating Conditions ............... A–17

A-33 RZ55 SCSI Hard Disk Drive Description ................. A–18

Altri manuali per DECstation 5000 Model 200

Indice

Altri manuali Digital Equipment Scrivania

Digital Equipment

Digital Equipment DECstation 5000/100 Series Manuale operativo

Digital Equipment

Digital Equipment DIGITAL Personal Workstation Manuale di installazione e funzionamento

Digital Equipment

Digital Equipment DEC 3000 600 AXP Manuale utente

Digital Equipment

Digital Equipment VAXstation VLC Guida rapida

Digital Equipment

Digital Equipment DECpc AXP 150 Manuale operativo

Digital Equipment

Digital Equipment DECpc LPv 425sx Manuale utente

Digital Equipment

Digital Equipment STARION 20 Series Manuale utente

Digital Equipment

Digital Equipment MicroVAX 3100 85 Guida

Digital Equipment

Digital Equipment MicroPDP-11 Manuale utente

Digital Equipment

Digital Equipment STARION 200i Manuale utente

Digital Equipment

Digital Equipment VAX 4000 100A Manuale di servizio

Digital Equipment

Digital Equipment Personal DECstation 5000 50 Manuale

Digital Equipment

Digital Equipment VAX-11/730 Manuale di installazione

Digital Equipment

Digital Equipment DECpc LP Manuale utente

Digital Equipment

Digital Equipment DEC 3000 300 AXP Series Istruzioni utente

Digital Equipment

Digital Equipment DECstation 5000 Model 200 Manuale utente

Digital Equipment

Digital Equipment VT100 Manuale utente

Digital Equipment

Digital Equipment 300 Series AXP Manuale utente

Digital Equipment

Digital Equipment VAX 10000 Guida all'installazione

Digital Equipment

Digital Equipment DECstaion 5000 240 Manuale

Digital Equipment

Digital Equipment DEC 3000 600 AXP Istruzioni per l'uso e l'installazione

Digital Equipment

Digital Equipment MicroVAX 3100 40 Guida rapida

Digital Equipment

Digital Equipment PDT 11/150 Manuale utente

Digital Equipment

Digital Equipment AlphaStation 600 Series Manuale operativo

Manuali Scrivania popolari di altre marche

HP m9060n - Pavilion - Elite Scheda tecnica

Asus

Asus E210 Series Manuale utente

Dell

Dell Inspiron 600m Manuale utente

Dell

Dell Inspiron 3662 Manuale utente

TotalFlow

TotalFlow uFLO Manuale utente

HP Presario SV7000 - Desktop PC Manuale utente

HP ProDesk 400 G5 Manuale

Logitech

Logitech MK320 Manuale utente

Dell

Dell XPS 730 H2C Manuale utente

Sony

Sony Vaio Series Manuale utente

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manuale utente

Alto

Alto MD 250 Manuale utente

Lenovo

Lenovo ThinkCentre Edge 72 Manuale

Lenovo

Lenovo ThinkStation D20 Manuale

Arbor Technology

Arbor Technology FPC-7800 Series Manuale utente

Sony

Sony VAIO VGX-TP1 Series Manuale utente

Asus

Asus Eee Box B204 Manuale utente

Dell

Dell Optiplex 9010 All In One Manuale utente