Remote Control is Unlocked.
⚫PALM REJECTION FUNCTION
Palm rejection is a way to disregard touch made with “a large contact area” while using pen or finger
modes.
A large contact area : palm, clenched fist, elbow, arm, etc.
When you touch the screen with a pen or afinger, palm rejection is activated and the screen does not
recognize touch made with the large contact area.
NOTE
The screen works only with conductive pens with Φ5-6mm diameter.
The touch panel does not recognize pens with smaller or large diameter.
Touch made by a pen is not recognized within 15mm distance from edge of the active display area.
NOTE
◼When button operations are aborted during adjustment, On-Screen Display disappears when the time
set for the Menu time has passed.
◼The MENU Button can be used to return previous menu item.
◼Any changes are automatically saved in the memory when the On Screen Display disappears. Turning
off the power should be avoided while using the Menu.
◼Adjustments for Horizontal / Vertical Pos., Size and Phase are saved for each signal timing. Except for
these adjustments, all other adjustments have only one setting which applies to all signal timings.
⚫LOC MODE
* Available for OSD key button only.
Pressing and holding the MENU button and the Power Switch for about 3 seconds when the Menu is not
displayed.
* The OSD menu is not displayed when the OSD is locked. Pressing and holding the MENU button and the
Power Switch for about 3 seconds when the Menu is not displayed.
The following OSD menu is displayed.
