Digital Watchdog DWC-MB45Wi650TW Manuale utente
User’s Manual Ver. 05/23
Before installing and using the camera, please read this manual carefully.
Be sure to keep it handy for future reference.
MEGApix® 5MP Long Range Bullet IP Camera
DWC-MB45Wi650T – IVA pre-loaded, gray housing
DWC-MB45Wi650TW – IVA pre-loaded, white housing
DWC-MPB45Wi650T – IVA+ pre-loaded, gray housing
DWC-MPB45Wi650TW – IVA+ pre-loaded, white housing
2
WARNING
To prevent damage which may result in fire or electric shock
hazard, do not expose this appliance to rain or moisture.
WARNING
1. Be sure to use only the standard adapter that is
specified in the specification sheet. Using any other
adapter could cause fire, electrical shock, or damage to
the product.
2. Incorrectly connecting the power supply or replacing
the battery may cause an explosion, fire, electric shock,
or damage to the product.
3. Do not connect multiple cameras to a single adapter.
Exceeding the capacity may cause excessive heat
generation or fire.
4. Securely plug the power cord into the power
receptacle. An insecure connection may cause fire.
5. When installing the camera, fasten it securely and
firmly. A falling camera may cause personal injury.
6. Do not place conductive objects (e.g. screwdrivers,
coins, metal items, etc.) or containers filled with water
on top of the camera. Doing so may cause personal
injury due to fire, electric shock, or falling objects.
7. Do not install the unit in humid, dusty, or sooty
locations. Doing so may cause fire or electric shock.
8. If any unusual smells or smoke come from the unit, stop
using the product. Immediately disconnect the power
source and contact the service center. Continued use in
such a condition may cause fire or electric shock.
9. If this product fails to operate normally, contact the
nearest service center. Never disassemble or modify
this product in any way.
10. When cleaning, do not spray water directly onto parts
of the product. Doing so may cause fire or electric
shock.
Precaution
Operating
• Before using, make sure the power supply and all other
parts are properly connected.
• While operating, if any abnormal condition or
malfunction is observed, stop using the camera
immediately and contact your dealer.
Handling
• Do not disassemble or tamper with parts inside the
camera.
• Do not drop the camera or subject it to shock or
vibration as this can damage the camera.
• Clean the clear dome cover with extra care. Scratches
and dust can ruin the quality of the camera image.
Installation and Storage
• Do not install the camera in areas of extreme
temperature, exceeding the allowed range.
• Avoid installing in humid or dusty environments.
• Avoid installing in places where radiation is present.
• Avoid installing in places where there are strong
magnetic fields and electric signals.
• Avoid installing in places where the camera would be
subject to strong vibrations.
• Never expose the camera to rain or water.
Warning
This symbol indicates that dangerous
voltage consisting of a risk of electric
shock is present within this unit.
Precaution
This exclamation point symbol is intended
to alert the user to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
CAUTION :
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE
PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
3
Important Safety Instructions
1. Read these Instructions. - All these safety and operating instructions should be read before the product is installed
or operated.
2. Keep these Instructions. - The safety, operating and use instructions should be retained for future reference.
3. Heed all warnings. - All warnings on the product and in the operating instructions should be adhered to.
4. Follow all instructions. - All operating and use instructions should be followed.
5. Do not use this device near water. - For example: near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement; near a swimming pool; etc.
6. Clean only with a dry cloth. - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners.
7. Do not block any ventilation openings. Install following the manufacturer’s instructions. - Slots and openings
in the cabinet are provided for ventilation, to ensure reliable operation of the product, and to protect it from over-
heating. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surfaces.
This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is
provided and the manufacturer’s instructions have been adhered to.
8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers)
that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Disposal of Old Appliances
1. When this crossed-out wheel bin symbol is attached to a product it means the
product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from the
municipal waste stream per laws designated by the government or the local
authorities.
3. The correct disposal of your old appliance will help prevent potential negative
consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact
your city office, waste disposal service or the shop where you purchased the product.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
4
Table of Contents
Introduction
Product and accessories..................................................................................................................................................................5
Parts identification............................................................................................................................................................................6
Installation
Factory reset........................................................................................................................................................................................7
Installation............................................................................................................................................................................................7
Cabling...................................................................................................................................................................................................8
Managing the SD Card..................................................................................................................................................................10
Network Setup
DW IP finder.......................................................................................................................................................................................11
Web Viewer
Login to the camera.......................................................................................................................................................................12
GUI overview.....................................................................................................................................................................................13
Camera Settings
Settings > Video and audio setup.............................................................................................................................................14
Settings > Camera setup > Image adjustment.....................................................................................................................22
Settings > Camera setup > Exposure settings......................................................................................................................23
Settings > Camera setup > Day and night settings............................................................................................................24
Settings > Camera setup > Backlight settings......................................................................................................................25
Settings > Camera setup > White Balance settings............................................................................................................26
Settings > Camera setup > Image enhancement settings...............................................................................................27
Settings > Camera setup > Video enhancement.................................................................................................................28
Settings > Network setup.............................................................................................................................................................29
Settings > Trigger action setup..................................................................................................................................................39
Settings > Event setup...................................................................................................................................................................43
Settings > Record setup................................................................................................................................................................48
Settings > Security setup..............................................................................................................................................................54
Settings > System setup > System information...................................................................................................................61
Settings > System setup > Firmware.......................................................................................................................................63
Settings > System setup > Date and time..............................................................................................................................64
Settings > System setup > DST..................................................................................................................................................65
Settings > System setup > Users...............................................................................................................................................66
Settings > System setup > System log....................................................................................................................................67
Settings > System setup > Factory reset................................................................................................................................68
Settings > System setup > Restart............................................................................................................................................69
Settings > System setup > System open source license...................................................................................................70
Network setup guides...............................................................................................................................71
FAQs............................................................................................................................................................78
Dimensions.................................................................................................................................................79
Specifications.............................................................................................................................................80
Warranty.....................................................................................................................................................81
Limits and exclusions.................................................................................................................................82
5
Introduction -
Product and Accessories
Hex Wrench Test Monitor
Cable
Mounting Template Waterproof Cap and
Gasket
Screws and
Plastic Anchors -
4pcs
Camera
Cables
Please check if all the camera and accessories are included in the package.
Quick Installation and
Download Guide
6
Introduction -
Part Name
Sunshield Adjusting Screws
Pan/Tilt Stopper
Screw
Bracket
Sunshield
Lens
Control Board
Con Cap
RJ-45 Connector
Waterproof Cap
Audio In/Out
DC Power Jack
Alarm In/Out
7
Installation -
Installation
Before installing your camera, you must read the following cautions.
1. The mounting surface must withstand five times the camera weight.
2. Do not let the cables get caught in improper places or the electric line cover can be damaged. This may
cause a short or fire.
3. Using the mounting template or the camera itself, mark and drill the necessary holes in the mounting
surface.
Installing your camera:
1. Pass wires through and make all necessary connections.
See the ‘Cabling’ section for more information.
2. Using the included screws and anchors, secure the camera
to the mounting surface.
3. Loosen the pan/tilt stopper screw and adjust the
camera’s angle as needed.
4. Use the test video cable for a local preview
of the camera’s view.
5. Use the T-W toggles at the bottom of the
camera to adjust the zoom.
Reset to the Factory Default
Press the reset button for 5 seconds to return the
setup to the factory default.
Warning:
If you press the ‘Reset’ button, you will lose all
setting data. If needed, please, make a note for
further installation.
Reset Button
T-W Jog Button SD Card Slot
Test Video Output
WIDE
TELE
Zoom Out
Zoom In
8
Installation -
Cabling
1. Using a PoE-Enabled Switch
The Camera is PoE-compliant, allowing transmission
of power and data via a single Ethernet cable.
PoE eliminates the need for the different cables used
to power, record, or control the camera. Follow the
illustration below to connect the camera to a PoE-
enabled switch using an Ethernet cable.
2. Using a Non-PoE Switch
If a PoE-enabled switch is not used, use a power
adaptor for power transmission and non-PoE switch
for data transmission.
Follow the illustrations below to connect the camera
without a PoE-enabled Switch.
Two Options
Use a PoE-enabled switch to connect data and power through a single cable and begin viewing and recording
images instantly.
A non-PoE switch will require an adaptor for power transmission.
Ethernet Cable Ethernet Cable
Power
9
1 Power Connection
Please, check the voltage and current capacity of
rated power carefully.
2 Network Connection
Connect the crossover cable into the RJ-45.
Installation -
Cabling
1 Power
2 Network
4 Audio Output
3 Audio Input
5 Alarm Output
6 Alarm Input
6 Alarm In
5 Alarm Out
Rate Power Power
Consumption PoE
DC 12V 9W
IEEE 802.3af
class3, max
10.5W
DI YELLOW +
DOT
DI COM YELLOW
DO1
COM BLUE
DO1
(N.O.) BLUE + DOT
N.C
N.O In 1
COM
In1
COM
In1
COM
In1
COM
3 Audio Output
Connect the ‘audio out’ port of the camera to the
‘line in’ port of the speaker.
If the speaker without the amplifier is connected
to the audio out port, it doesn’t work properly.
Therefore, the speaker with the amplifier or the
separate amplifier is needed.
Audio Out is available via the RTSP backchannel.
4 Audio Input
Connect the ‘audio in’ port of the camera to the
microphone directly or 'line out’ port of the
amplifier connected with a microphone.
If the microphone is connected directly, the
microphone with the embedded amplifier such
as condenser mic. needs to be used.
5 Alarm/Relay Out (DO)
Connects to the alarm lights, siren or lamps and
the sensor types are normally open and
normally close.
6 Sensor/Alarm Input (DI)
The sensor/alarm input device's cable should
connect to + and - of the Terminal Block.
10
Installation -
Managing the SD Card
Micro
The memory card is an external data storage
device that has been developed to offer an
entirely new way to record and share video,
audio, and text data using digital devices.
Recommended SD card specification
(not included)
1 Inserting an SD Memory Card
Insert the SD card in the arrow direction.
Don’t insert the SD memory card while it’s
upside down by force. Otherwise, it may
damage the SD memory card.
2 Removing an SD Memory Card
Removing an SD Memory Card Gently press down
on the exposed end of the memory card as shown
in the diagram to eject the memory card from
the slot.
Pressing too hard on the SD memory card can
cause the card to shoot out uncontrollably from
the slot when released.
If you have saved data in the SD memory card,
removing the SD memory card before setting
the record to OFF will cause damage to the data
stored in the card.
-Maximum SD Card size supported: Up
to 1TB micro SD / exFAT.
-When inserting the SD card into the
card slot, the SD card’s contacts should
be facing upward, as shown in the
diagram.
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali Digital Watchdog Telecamera di sicurezza
Digital Watchdog
Digital Watchdog Starlight D2363TIR Series Manuale utente
Digital Watchdog
Digital Watchdog MEGApix DWC-MF5Wi4TW Manuale utente
Digital Watchdog
Digital Watchdog DWC-C223W Manuale utente
Digital Watchdog
Digital Watchdog MEGApix DWC-MV421D Manuale utente
Digital Watchdog
Digital Watchdog MEGApix Snapit DWC-MV421DB Manuale utente
Digital Watchdog
Digital Watchdog Snapit DWC-V4382D Manuale utente
Digital Watchdog
Digital Watchdog MEGApix Ai DWC-PDS10Wi28A Manuale utente
Digital Watchdog
Digital Watchdog STAR-LIGHT Universal HD over Coax... Manuale utente
Digital Watchdog
Digital Watchdog Starlight D1363D Manuale utente
Digital Watchdog
Digital Watchdog STAR-LIGHT Universal HD over Coax... Manuale utente
Digital Watchdog
Digital Watchdog Star-Light Plus DWC-VA583WTIR Manuale utente
Digital Watchdog
Digital Watchdog MEGApix DWC-MV421D Manuale utente
Digital Watchdog
Digital Watchdog MEGApix DWC-MPTZ30X Manuale utente
Digital Watchdog
Digital Watchdog D1373D Manuale utente
Digital Watchdog
Digital Watchdog MC421D Manuale utente
Digital Watchdog
Digital Watchdog MegaPix Pano DWC-PZ21M69T Manuale utente
Digital Watchdog
Digital Watchdog DWC-MC352 Manuale utente
Digital Watchdog
Digital Watchdog DWC-V7253TIR Manuale utente
Digital Watchdog
Digital Watchdog DWC-MB44iALPR Manuale utente
Digital Watchdog
Digital Watchdog D1362D Series Manuale utente
