DigitaLinx DL-HD24A-H2 Manuale utente

Rev 190717 Phone: 719-260-0061

Toll-Free: 800-530-8998

Fax: 719-260-0075

DL-HD24A-H2 Owners Manual

11675 Ridgeline Drive

Colorado Springs, CO

80921

DL-HD24A-H2 Owners Manual

Important Safety Instrucons

»Please completely read and verify you understand all instrucons in this manual before operang this equipment.

»Keep these instrucons in a safe, accessible place for future reference.

»Heed all warnings.

»Follow all instrucons.

»Do not use this apparatus near water.

»Clean only with a dry cloth.

»Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers)

that produce heat.

»Use only accessories specied or recommended by Intelix.

»Explanaon of graphical symbols:

◊ Lightning bolt/ash symbol: the lightning bolt/ash and arrowhead within an equilateral triangle

symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the

product enclosure which may be of sucient magnitude to constute a risk of shock to a person or

persons.

◊ Exclamaon point symbol: the exclamaon point within an equilateral triangle symbol is intended

to alert the user to the presence of important operang and maintenance (servicing) instrucons

in the literature accompanying the product.

»WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR

MOISTURE AND OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS.

»Use the mains plug to disconnect the apparatus from the mains.

»THE MAINS PLUG OF THE POWER CORD MUST REMAIN READILY ACCESSIBLE.

»Do not defeat the safety purpose polarized or grounding-type plug. A polarized plug has two blades with one wider

than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong

is provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of

your obsolete outlet. Cauon! To reduce the risk of electrical shock, grounding of the center pin of this plug must be

maintained.

»Protect the power cord from being walked on or pinched parcularly at the plugs, convenience receptacles, and the

point where they exit from the apparatus.

»Do not block the air venlaon openings. Only mount the equipment per Intelix’s instrucons.

»Use only with the cart, stand, table, or rack specied by Intelix or sold with the equipment. When/if a

cart is used, use cauon when moving the cart/equipment combinaon to avoid injury from p-over.

»Unplug this apparatus during lightning storms or when unused for long periods of me.

»Cauon! Shock Hazard. Do not open the unit.

»Refer to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as

power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate normally, or has been dropped.

DL-HD24A-H2 Installaon Guide

Table of Contents

Product Overview�� 4

Product View�� 5

Front Panel�� 5

Switcher - Rear Panel �� 6

Installaon Instrucons�� 7

Rack Mounng the Switcher �� 7

Connecng Video Sources�� 7

Connecng Displays �� 7

Connecng Audio Output�� 7

Connecng RS232 Control�� 8

Connecng Ethernet �� 9

Web Browser Control / GUI .................................................................................................................... 9

Telnet Control ......................................................................................................................................... 9

Applying Power �� 9

A/V Diagram �� 10

Web Browser Control / System Sengs �� 11

Connecng to Web Control Interface��11

Audio / Video Switching��12

Display On/O Control�� 13

Conguring and Tesng RS232 Display Commands��14

Network Sengs��15

Access Sengs�� 16

EDID Management �� 17

Front Panel Sengs �� 17

Dipswitch Sengs��18

RS232 and TCP/IP Control �� 19

A/V Source Switching �� 19

Auto Switching Method ��19

Audio On/O Control ��20

Display On/O CEC Control�� 21

System Commands�� 22

Technical Specicaons �� 23

DL-HD24A-H2 Owners Manual

The Digitalinx DL-HD24A-H2 is an HDMI 2.0 compable 2:4 auto scaling and auto switching HDMI

distribuon amp / splier that features two HDMI inputs and four HDMI outputs. The spliers HDMI

outputs can switch as a group to either input via auto or manual switching methods and supports down

scaling so a 4K video input can automacally be down scaled to an 1080p output when connecng

a display that only supports resoluons up to 1080p. The DL-HD24A-H2 supports 4K signals up to

4K@60Hz / 4:4:4 / 8 bit color and features an easy EDID management opon using dip switches on the

rear panel of the unit. Analog and digital audio can be de-embedded from the selected HDMI input

and the DL-HD24A-H2 supports CEC control and is HDCP 2.2 compliant. The DL-HD24A-H2 can be

controlled via front panel buons, RS232 or by TCP/IP control.

Product Overview

• DL-HD24A-H2 2:4 Switching DA

• Quick Install Guide

• (4) Plasc Cushions

• (2) Mounng Clips with (4) Mounng Screws

• 12V DC Power supply with US, EU, UK and AU power adapters.

DL-HD24A-H2 Installaon Guide

Product View

Front Panel

1 2 3 4 5 6 7 8 9

1. POWER LED INDICATOR - Illuminates solid RED when device is powered ON

2. OUTPUT LED INDICATORS - Illuminates solid GREEN when there is an HDMI output on

the corresponding channel

3. SOURCE BUTTON and LED INDICATORS

AUTO - Switching mode indicator; illuminates solid GREEN when device is in auto switching mode,

OFF when in manual switching mode. To change switching modes, hold down the SOURCE buon for

3 seconds.

IN1 / IN2 - Input indicator; illuminates solid when corresponding input channel has been selected.

To change inputs, use the SOURCE buon to toggle between inputs. Front panel input control only

works in manual switching mode.

4. DISPLAY ON - Press buon to turn connected displays ON via CEC or RS232

5. DISPLAY OFF - Press buon to turn connected displays OFF via CEC or RS232

6. VOLUME DOWN/MUTE - Press buon to turn connected display volume down via CEC

or RS232. To mute audio press and hold buon down for 3 seconds

7. VOLUME UP - Press buon to turn connected display volume UP via CEC or RS232. Use

up buon to exit audio mute mode

8. EDID - EDID value sengs selector

9. FW - Micro USB connector for rmware updates

DL-HD24A-H2 Owners Manual

Rear Panel

1. INPUTS - Two HDMI input ports to connect HDMI sources

2. OUTPUTS - Four HDMI output ports to connect HDMI displays

3. AUDIO OUT -3 pin phoenix connector for analog audio output

4. SPDIF OUT - Toslink digital audio output port for digital audio output

5. EDID - 4 pin dip switches for EDID sengs

6. RS232 - DB-9 female connector for RS232 control

7. TCP/IP - RJ45 for Telnet or web GUI control

8. DC12V - 2-pin terminal block for external power supply

1 2 3 4 5 6 7 8

DL-HD24A-H2 Installaon Guide

Installaon Instrucons

Rack Mounng the Switcher

Remove the screws on both sides of the distributor, then aach the supplied rack mounng ears / clips for rack-

mounng.

Connecng Video Sources

Connecng Displays

Connect source devices to the inputs on the DL-HD24A-H2. When using HDMI cables for source inputs, use a

High Speed HDMI cable that is less than or equal to 5 meters in length for 4k60 signals and 8 meters for 1080p

signals.

Connect the display devices to the HDMI output of the DL-HD24A-H2 using a High Speed HDMI cable that is less

than or equal to 5 meters in length for 4k60 signals and 8 meters for 1080p signals.

The DL-HD24A-H2 features two audio outputs, digital Toslink and unbalanced stereo analog. The audio outputs

will de-embed the HDMI audio stream of the selected HDMI input.

Note: When using mul channel audio signals only the digital audio output can be used. The analog output will

only pass 2 channel stereo audio.

To connect digital audio output, connect a Toslink digital audio cable from the DL-HD24A-H2 to a compable

audio receiver with the same input. To connect the 3 pin unbalanced stereo analog audio output, connect le

to le leads, right to right leads and ground to ground leads to an unbalanced audio connector / circuit.

Connecng Audio Output

DL-HD24A-H2 Installaon Guide

Connect a control system to the DL-HD24A-H2 switcher via RS232 so the switcher can be controlled by a 3rd

party control system using serial communicaon.

Connecng RS232 Control

RS232 Wiring

Connect the system controller RX signal

to TX on the DL-HD24A-H2 switcher, then

connect the controllers TX signal to RX.

Default RS232 Sengs:

• 9600 baud

• 8 Data Bits

• 1 Stop Bit

• Parity = none

PIN 2 - Transmit

PIN 3 - Receive

PIN 5 - Ground

PIN 1PIN 5

DL-HD24A-H2 DB9 FEMALE

DL-HD24A-H2 Installaon Guide

Connecng Ethernet

The DL-HD24A-H2 may be controlled via Ethernet using the internal web GUI or via Telnet server.

The TCP/IP port requires a standard straight-through Category 5

or greater cable with the TIA/EIA-568B crimp paern for opmal

operaon.

The default sengs for the TCP/IP port are:

IP address: 192.168.0.178, Telnet port 4001

TIA/EIA-568B

Orange/White

Orange

Green/White

Blue

Blue/White

Green

Brown/White

Brown

Pin 1

Pin 2

Pin 3

Pin 4

Pin 5

Pin 6

Pin 7

Pin 8

1 8

Web Browser Control / GUI

Telnet Control

To connect to the DL-HD24A-H2 web GUI, connect a computer to the same LAN as the DL-HD24A-H2 be sure

your computer is in the same network ID range as the switcher, enter in the default IP of the switcher into a web

browser. See page 11 for web GUI sengs and conguraon.

To connect to the DL-HD24A-H2 and control it as a Telnet client, connect a computer to the same LAN as the DL-

HD24A-H2 , be sure your computer is in the same network ID range as the switcher, enter in the default IP of the

switcher into a telnet server and use Port 4001 to connect. See page 19 for all the available control commands

for this switcher kit.

Connect the included power supply to the DL-HD24A-H2 and lock the power supply to the power connector by

twisng the locking collar clockwise.

Applying Power

DL-HD24A-H2 Installaon Guide

DL-HD24A-H2 A/V DIAGRAM

4K Display

Media Player 1

Media Player 2

Control System

HDMI

CATx

RS232

AUDIO

1080p Display

4K Display

1080p Display

Audio Amplifer / AVR

A/V Diagram

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali DigitaLinx Amplificatore

DigitaLinx

DigitaLinx DL-DA12S Manuale utente

DigitaLinx

DigitaLinx DL-ARK Series Manuale utente

Manuali Amplificatore popolari di altre marche

ASTRO

ASTRO HVO V40 P Manuale utente

Marantz

Marantz SUPERSCOPE BLA-545 Istruzioni per il montaggio

NAD

NAD CI980 Manuale utente

Technics

Technics SE-CH770 Manuale utente

Harman Kardon

Harman Kardon HK6300 Manuale utente

NAD

NAD T975 Manuale utente

McIntosh

McIntosh MA6850 Manuale utente

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manuale utente

Viatron

Viatron Autrix Manuale utente

GME

GME GA9800 Manuale utente

Atlas

Atlas CP700 Manuale utente

Roland

Roland KC-1000 Manuale utente

Pyle

Pyle PFMRA350BW Manuale utente

Advantage

Advantage S-250 Manuale utente

IRT Electronics

IRT Electronics DVA-3007 Manuale utente

Dimavery

Dimavery BA-100 Series Manuale utente

Sony

Sony XM-S400D Manuale utente

Schertler

Schertler ROY X Manuale utente